wifipineapple-openwrt/target/linux/mvebu/patches-3.10/0154-mtd-nand-pxa3xx-make-E...

68 lines
2.4 KiB
Diff

From c312e183e96bed3b727888673d4b6b54b8e6283e Mon Sep 17 00:00:00 2001
From: Brian Norris <computersforpeace@gmail.com>
Date: Thu, 14 Nov 2013 14:41:32 -0800
Subject: [PATCH 154/203] mtd: nand: pxa3xx: make ECC configuration checks more
explicit
The Armada BCH configuration in this driver uses one of the two
following ECC schemes:
16-bit correction per 2048 bytes
16-bit correction per 1024 bytes
These are sufficient for mapping to the 4-bit per 512-bytes and 8-bit
per 512-bytes (respectively) minimum correctability requirements of many
common NAND.
The current code only checks for the required strength (4-bit or 8-bit)
without checking the ECC step size that is associated with that strength
(and simply assumes it is 512). While that is often a safe assumption to
make, let's make it explicit, since we have that information.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Daniel Mack <zonque@gmail.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1364,9 +1364,13 @@ static int pxa_ecc_init(struct pxa3xx_na
static int armada370_ecc_init(struct pxa3xx_nand_info *info,
struct nand_ecc_ctrl *ecc,
- int strength, int page_size)
+ int strength, int ecc_stepsize, int page_size)
{
- if (strength == 4 && page_size == 4096) {
+ /*
+ * Required ECC: 4-bit correction per 512 bytes
+ * Select: 16-bit correction per 2048 bytes
+ */
+ if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
info->ecc_bch = 1;
info->chunk_size = 2048;
info->spare_size = 32;
@@ -1377,7 +1381,11 @@ static int armada370_ecc_init(struct pxa
ecc->strength = 16;
return 1;
- } else if (strength == 8 && page_size == 4096) {
+ /*
+ * Required ECC: 8-bit correction per 512 bytes
+ * Select: 16-bit correction per 1024 bytes
+ */
+ } else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) {
info->ecc_bch = 1;
info->chunk_size = 1024;
info->spare_size = 0;
@@ -1485,6 +1493,7 @@ KEEP_CONFIG:
if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
ret = armada370_ecc_init(info, &chip->ecc,
chip->ecc_strength_ds,
+ chip->ecc_step_ds,
mtd->writesize);
else
ret = pxa_ecc_init(info, &chip->ecc,