wifipineapple-openwrt/target/linux/mvebu/patches-3.10/0117-mtd-nand-pxa3xx-Suppor...

60 lines
2.0 KiB
Diff

From 6bbda039fe5e9d1b3c04f4f0dd8479a2c102d28e Mon Sep 17 00:00:00 2001
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Mon, 12 Aug 2013 14:14:50 -0300
Subject: [PATCH 117/203] mtd: nand: pxa3xx: Support command buffer #3
Some newer controllers support a fourth command buffer. This additional
command buffer allows to set an arbitrary length count, using the
NDCB3.NDLENCNT field, to perform non-standard length operations
such as the ONFI parameter page read.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -197,6 +197,7 @@ struct pxa3xx_nand_info {
uint32_t ndcb0;
uint32_t ndcb1;
uint32_t ndcb2;
+ uint32_t ndcb3;
};
static bool use_dma = 1;
@@ -493,9 +494,22 @@ static irqreturn_t pxa3xx_nand_irq(int i
nand_writel(info, NDSR, NDSR_WRCMDREQ);
status &= ~NDSR_WRCMDREQ;
info->state = STATE_CMD_HANDLE;
+
+ /*
+ * Command buffer registers NDCB{0-2} (and optionally NDCB3)
+ * must be loaded by writing directly either 12 or 16
+ * bytes directly to NDCB0, four bytes at a time.
+ *
+ * Direct write access to NDCB1, NDCB2 and NDCB3 is ignored
+ * but each NDCBx register can be read.
+ */
nand_writel(info, NDCB0, info->ndcb0);
nand_writel(info, NDCB0, info->ndcb1);
nand_writel(info, NDCB0, info->ndcb2);
+
+ /* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+ nand_writel(info, NDCB0, info->ndcb3);
}
/* clear NDSR to let the controller exit the IRQ */
@@ -554,6 +568,7 @@ static int prepare_command_pool(struct p
default:
info->ndcb1 = 0;
info->ndcb2 = 0;
+ info->ndcb3 = 0;
break;
}