John Crispin 973f88e0d5 lantiq: disable buffered writes on Intel command set flash ... Some Lantiq SoCs are not able to use buffered writes properly with Intel command set flash due to the way NOR addresses on EBU are manipulated. This patch disables buffered writes on those devices. The only device affected at the moment is ARV4510PW, others use AMD/Fujitsu command set. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44451 3c298f89-4303-0410-b956-a3cf2f4a3e73		2015-02-14 20:48:32 +00:00
..
base-files	lantiq: td-w8970: fix failsafe mode	2015-02-09 12:14:48 +00:00
dts	lantiq: fix DGN3500 root device	2015-02-13 07:29:17 +00:00
falcon	build: unify mips target cflags	2013-09-26 17:53:14 +00:00
files/firmware/lantiq	[lantiq] move GPHY FW blobs to non versioned folder	2013-03-14 18:42:21 +00:00
image	lantiq: fix VG3503J partition table for newer kernels	2015-02-11 10:17:38 +00:00
patches-3.14	lantiq: disable buffered writes on Intel command set flash	2015-02-14 20:48:32 +00:00
patches-3.18	lantiq: disable buffered writes on Intel command set flash	2015-02-14 20:48:32 +00:00
xrx200	lantiq: PCI should be enabled on vrx200	2015-02-12 08:23:45 +00:00
xway	lantiq: add 3.18 support	2015-02-09 12:13:25 +00:00
Makefile	lantiq: add 3.18 support	2015-02-09 12:13:25 +00:00
base-files.mk	lantiq: add runtime generation of /etc/config/network	2011-11-15 18:21:00 +00:00
config-3.14	lantiq: update to 3.14	2014-08-18 13:09:30 +00:00
config-3.18	lantiq: make m25p80 work again	2015-02-12 11:15:56 +00:00
modules.mk	[lantiq] fix i2c-lantiq module	2012-12-16 10:03:18 +00:00