hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
wifipineapple-openwrt/target/linux/brcm47xx/patches-3.0/022-USB-Add-ehci-ssb-driver...

331 lines
8.0 KiB
Diff
Raw Blame History

--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -230,6 +230,19 @@ config USB_OXU210HP_HCD
To compile this driver as a module, choose M here: the
module will be called oxu210hp-hcd.
+config USB_EHCI_HCD_SSB
+ bool "EHCI support for Broadcom SSB EHCI core"
+ depends on USB_EHCI_HCD && (SSB = y || SSB = USB_EHCI_HCD) && EXPERIMENTAL
+ default n
+ ---help---
+ Support for the Sonics Silicon Backplane (SSB) attached
+ Broadcom USB EHCI core.
+
+ This device is present in some embedded devices with
+ Broadcom based SSB bus.
+
+ If unsure, say N.
+
config USB_ISP116X_HCD
tristate "ISP116X HCD support"
depends on USB
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1282,9 +1282,14 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_grlib_driver
#endif
+#ifdef CONFIG_USB_EHCI_HCD_SSB
+#include "ehci-ssb.c"
+#define SSB_EHCI_DRIVER ssb_ehci_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
- !defined(XILINX_OF_PLATFORM_DRIVER)
+ !defined(XILINX_OF_PLATFORM_DRIVER) && !defined(SSB_EHCI_DRIVER)
#error "missing bus glue for ehci-hcd"
#endif
@@ -1344,10 +1349,20 @@ static int __init ehci_hcd_init(void)
if (retval < 0)
goto clean4;
#endif
+
+#ifdef SSB_EHCI_DRIVER
+ retval = ssb_driver_register(&SSB_EHCI_DRIVER);
+ if (retval < 0)
+ goto clean5;
+#endif
return retval;
+#ifdef SSB_EHCI_DRIVER
+ /* ssb_driver_unregister(&SSB_EHCI_DRIVER); */
+clean5:
+#endif
#ifdef XILINX_OF_PLATFORM_DRIVER
- /* platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); */
+ platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
clean4:
#endif
#ifdef OF_PLATFORM_DRIVER
@@ -1378,6 +1393,9 @@ module_init(ehci_hcd_init);
static void __exit ehci_hcd_cleanup(void)
{
+#ifdef SSB_EHCI_DRIVER
+ ssb_driver_unregister(&SSB_EHCI_DRIVER);
+#endif
#ifdef XILINX_OF_PLATFORM_DRIVER
platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
#endif
--- /dev/null
+++ b/drivers/usb/host/ehci-ssb.c
@@ -0,0 +1,255 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom USB-core EHCI driver (SSB bus glue)
+ *
+ * Copyright 2007 Steven Brown <sbrown@cortland.com>
+ * Copyright 2010 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Derived from the OHCI-SSB driver
+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
+ *
+ * Derived from the EHCI-PCI driver
+ * Copyright (c) 2000-2004 by David Brownell
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005 Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/ssb/ssb.h>
+
+
+struct ssb_ehci_device {
+ struct ehci_hcd ehci; /* _must_ be at the beginning. */
+};
+
+static inline
+struct ssb_ehci_device *hcd_to_ssb_ehci(struct usb_hcd *hcd)
+{
+ return (struct ssb_ehci_device *)(hcd->hcd_priv);
+}
+
+static int ssb_ehci_reset(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int err;
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs +
+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+ dbg_hcs_params(ehci, "reset");
+ dbg_hcc_params(ehci, "reset");
+
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+ err = ehci_halt(ehci);
+
+ if (err)
+ return err;
+
+ err = ehci_init(hcd);
+
+ if (err)
+ return err;
+
+ ehci_reset(ehci);
+
+ return err;
+}
+
+static const struct hc_driver ssb_ehci_hc_driver = {
+ .description = "ssb-usb-ehci",
+ .product_desc = "SSB EHCI Controller",
+ .hcd_priv_size = sizeof(struct ssb_ehci_device),
+
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ .reset = ssb_ehci_reset,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+
+ .get_frame_number = ehci_get_frame,
+
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+#if defined(CONFIG_PM)
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+#endif
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static void ssb_ehci_detach(struct ssb_device *dev)
+{
+ struct usb_hcd *hcd = ssb_get_drvdata(dev);
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+ ssb_device_disable(dev, 0);
+}
+
+static int ssb_ehci_attach(struct ssb_device *dev)
+{
+ struct ssb_ehci_device *ehcidev;
+ struct usb_hcd *hcd;
+ int err = -ENOMEM;
+ u32 tmp;
+
+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+ return -EOPNOTSUPP;
+
+ /*
+ * USB 2.0 special considerations:
+ *
+ * In addition to the standard SSB reset sequence, the Host Control
+ * Register must be programmed to bring the USB core and various phy
+ * components out of reset.
+ */
+ ssb_device_enable(dev, 0);
+ ssb_write32(dev, 0x200, 0x7ff);
+
+ /* Change Flush control reg */
+ tmp = ssb_read32(dev, 0x400);
+ tmp &= ~8;
+ ssb_write32(dev, 0x400, tmp);
+ tmp = ssb_read32(dev, 0x400);
+
+ /* Change Shim control reg */
+ tmp = ssb_read32(dev, 0x304);
+ tmp &= ~0x100;
+ ssb_write32(dev, 0x304, tmp);
+ tmp = ssb_read32(dev, 0x304);
+
+ udelay(1);
+
+ /* Work around for 5354 failures */
+ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+ /* Change syn01 reg */
+ tmp = 0x00fe00fe;
+ ssb_write32(dev, 0x894, tmp);
+
+ /* Change syn03 reg */
+ tmp = ssb_read32(dev, 0x89c);
+ tmp |= 0x1;
+ ssb_write32(dev, 0x89c, tmp);
+ }
+
+ hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev,
+ dev_name(dev->dev));
+ if (!hcd)
+ goto err_dev_disable;
+
+ ehcidev = hcd_to_ssb_ehci(hcd);
+ tmp = ssb_read32(dev, SSB_ADMATCH0);
+ hcd->rsrc_start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
+ hcd->rsrc_len = 0x100; /* ehci reg block size */
+ /*
+ * start & size modified per sbutils.c
+ */
+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs)
+ goto err_put_hcd;
+ err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
+ if (err)
+ goto err_iounmap;
+
+ ssb_set_drvdata(dev, hcd);
+
+ return err;
+
+err_iounmap:
+ iounmap(hcd->regs);
+err_put_hcd:
+ usb_put_hcd(hcd);
+err_dev_disable:
+ ssb_device_disable(dev, 0);
+ return err;
+}
+
+static int ssb_ehci_probe(struct ssb_device *dev,
+ const struct ssb_device_id *id)
+{
+ int err;
+ u16 chipid_top;
+
+ /* USBcores are only connected on embedded devices. */
+ chipid_top = (dev->bus->chip_id & 0xFF00);
+ if (chipid_top != 0x4700 && chipid_top != 0x5300)
+ return -ENODEV;
+
+ /* TODO: Probably need checks here; is the core connected? */
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ err = ssb_ehci_attach(dev);
+
+ return err;
+}
+
+static void ssb_ehci_remove(struct ssb_device *dev)
+{
+ ssb_ehci_detach(dev);
+}
+
+#ifdef CONFIG_PM
+
+static int ssb_ehci_suspend(struct ssb_device *dev, pm_message_t state)
+{
+ ssb_device_disable(dev, 0);
+
+ return 0;
+}
+
+static int ssb_ehci_resume(struct ssb_device *dev)
+{
+ struct usb_hcd *hcd = ssb_get_drvdata(dev);
+ struct ssb_ehci_device *ehcidev = hcd_to_ssb_ehci(hcd);
+
+ ssb_device_enable(dev, 0);
+
+ ehci_finish_controller_resume(hcd);
+ return 0;
+}
+
+#else /* !CONFIG_PM */
+#define ssb_ehci_suspend NULL
+#define ssb_ehci_resume NULL
+#endif /* CONFIG_PM */
+
+static const struct ssb_device_id ssb_ehci_table[] = {
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+ SSB_DEVTABLE_END
+};
+MODULE_DEVICE_TABLE(ssb, ssb_ehci_table);
+
+static struct ssb_driver ssb_ehci_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ssb_ehci_table,
+ .probe = ssb_ehci_probe,
+ .remove = ssb_ehci_remove,
+ .suspend = ssb_ehci_suspend,
+ .resume = ssb_ehci_resume,
+};
Reference in New Issue View Git Blame Copy Permalink