hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
wifipineapple-openwrt/target/linux/generic/patches-3.10/025-bcma_backport.patch

1769 lines
55 KiB
Diff
Raw Blame History

--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
config BCMA_HOST_PCI
bool "Support for BCMA on PCI-host bus"
depends on BCMA_HOST_PCI_POSSIBLE
+ default y
config BCMA_DRIVER_PCI_HOSTMODE
bool "Driver for PCI core working in hostmode"
@@ -34,8 +35,14 @@ config BCMA_DRIVER_PCI_HOSTMODE
PCI core hostmode operation (external PCI bus).
config BCMA_HOST_SOC
- bool
- depends on BCMA_DRIVER_MIPS
+ bool "Support for BCMA in a SoC"
+ depends on BCMA
+ help
+ Host interface for a Broadcom AIX bus directly mapped into
+ the memory. This only works with the Broadcom SoCs from the
+ BCM47XX line.
+
+ If unsure, say N
config BCMA_DRIVER_MIPS
bool "BCMA Broadcom MIPS core driver"
@@ -68,6 +75,7 @@ config BCMA_DRIVER_GMAC_CMN
config BCMA_DRIVER_GPIO
bool "BCMA GPIO driver"
depends on BCMA && GPIOLIB
+ select IRQ_DOMAIN if BCMA_HOST_SOC
help
Driver to provide access to the GPIO pins of the bcma bus.
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
@@ -3,6 +3,7 @@ bcma-y += driver_chipcommon.o driver
bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o
bcma-$(CONFIG_BCMA_NFLASH) += driver_chipcommon_nflash.o
bcma-y += driver_pci.o
+bcma-y += driver_pcie2.o
bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -22,6 +22,8 @@
struct bcma_bus;
/* main.c */
+bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
+ int timeout);
int bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus,
@@ -31,8 +33,6 @@ int __init bcma_bus_early_register(struc
int bcma_bus_suspend(struct bcma_bus *bus);
int bcma_bus_resume(struct bcma_bus *bus);
#endif
-struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
- u8 unit);
/* scan.c */
int bcma_bus_scan(struct bcma_bus *bus);
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
@@ -9,6 +9,25 @@
#include <linux/export.h>
#include <linux/bcma/bcma.h>
+static bool bcma_core_wait_value(struct bcma_device *core, u16 reg, u32 mask,
+ u32 value, int timeout)
+{
+ unsigned long deadline = jiffies + timeout;
+ u32 val;
+
+ do {
+ val = bcma_aread32(core, reg);
+ if ((val & mask) == value)
+ return true;
+ cpu_relax();
+ udelay(10);
+ } while (!time_after_eq(jiffies, deadline));
+
+ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
+
+ return false;
+}
+
bool bcma_core_is_enabled(struct bcma_device *core)
{
if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
@@ -25,13 +44,15 @@ void bcma_core_disable(struct bcma_devic
if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
return;
- bcma_awrite32(core, BCMA_IOCTL, flags);
- bcma_aread32(core, BCMA_IOCTL);
- udelay(10);
+ bcma_core_wait_value(core, BCMA_RESET_ST, ~0, 0, 300);
bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
bcma_aread32(core, BCMA_RESET_CTL);
udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, flags);
+ bcma_aread32(core, BCMA_IOCTL);
+ udelay(10);
}
EXPORT_SYMBOL_GPL(bcma_core_disable);
@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device
bcma_aread32(core, BCMA_IOCTL);
bcma_awrite32(core, BCMA_RESET_CTL, 0);
+ bcma_aread32(core, BCMA_RESET_CTL);
udelay(1);
bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -140,8 +140,15 @@ void bcma_core_chipcommon_init(struct bc
bcma_core_chipcommon_early_init(cc);
if (cc->core->id.rev >= 20) {
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
+ u32 pullup = 0, pulldown = 0;
+
+ if (cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM43142) {
+ pullup = 0x402e0;
+ pulldown = 0x20500;
+ }
+
+ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, pullup);
+ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, pulldown);
}
if (cc->capabilities & BCMA_CC_CAP_PMU)
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -56,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct b
}
EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
+static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc)
+{
+ u32 ilp_ctl, alp_hz;
+
+ if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
+ BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
+ return 0;
+
+ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
+ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
+ usleep_range(1000, 2000);
+
+ ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
+ ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
+
+ bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
+
+ alp_hz = ilp_ctl * 32768 / 4;
+ return (alp_hz + 50000) / 100000 * 100;
+}
+
+static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq)
+{
+ struct bcma_bus *bus = cc->core->bus;
+ u32 freq_tgt_target = 0, freq_tgt_current;
+ u32 pll0, mask;
+
+ switch (bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM43142:
+ /* pmu2_xtaltab0_adfll_485 */
+ switch (xtalfreq) {
+ case 12000:
+ freq_tgt_target = 0x50D52;
+ break;
+ case 20000:
+ freq_tgt_target = 0x307FE;
+ break;
+ case 26000:
+ freq_tgt_target = 0x254EA;
+ break;
+ case 37400:
+ freq_tgt_target = 0x19EF8;
+ break;
+ case 52000:
+ freq_tgt_target = 0x12A75;
+ break;
+ }
+ break;
+ }
+
+ if (!freq_tgt_target) {
+ bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n",
+ xtalfreq);
+ return;
+ }
+
+ pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0);
+ freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >>
+ BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
+
+ if (freq_tgt_current == freq_tgt_target) {
+ bcma_debug(bus, "Target TGT frequency already set\n");
+ return;
+ }
+
+ /* Turn off PLL */
+ switch (bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM43142:
+ mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
+ BCMA_RES_4314_MACPHY_CLK_AVAIL);
+
+ bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
+ bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
+ bcma_wait_value(cc->core, BCMA_CLKCTLST,
+ BCMA_CLKCTLST_HAVEHT, 0, 20000);
+ break;
+ }
+
+ pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK;
+ pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT;
+ bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0);
+
+ /* Flush */
+ if (cc->pmu.rev >= 2)
+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
+
+ /* TODO: Do we need to update OTP? */
+}
+
+static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+ u32 xtalfreq = bcma_pmu_xtalfreq(cc);
+
+ switch (bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM43142:
+ if (xtalfreq == 0)
+ xtalfreq = 20000;
+ bcma_pmu2_pll_init0(cc, xtalfreq);
+ break;
+ }
+}
+
static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
@@ -66,6 +169,25 @@ static void bcma_pmu_resources_init(stru
min_msk = 0x200D;
max_msk = 0xFFFF;
break;
+ case BCMA_CHIP_ID_BCM43142:
+ min_msk = BCMA_RES_4314_LPLDO_PU |
+ BCMA_RES_4314_PMU_SLEEP_DIS |
+ BCMA_RES_4314_PMU_BG_PU |
+ BCMA_RES_4314_CBUCK_LPOM_PU |
+ BCMA_RES_4314_CBUCK_PFM_PU |
+ BCMA_RES_4314_CLDO_PU |
+ BCMA_RES_4314_LPLDO2_LVM |
+ BCMA_RES_4314_WL_PMU_PU |
+ BCMA_RES_4314_LDO3P3_PU |
+ BCMA_RES_4314_OTP_PU |
+ BCMA_RES_4314_WL_PWRSW_PU |
+ BCMA_RES_4314_LQ_AVAIL |
+ BCMA_RES_4314_LOGIC_RET |
+ BCMA_RES_4314_MEM_SLEEP |
+ BCMA_RES_4314_MACPHY_RET |
+ BCMA_RES_4314_WL_CORE_READY;
+ max_msk = 0x3FFFFFFF;
+ break;
default:
bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
bus->chipinfo.id);
@@ -165,6 +287,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c
bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
BCMA_CC_PMU_CTL_NOILPONW);
+ bcma_pmu_pll_init(cc);
bcma_pmu_resources_init(cc);
bcma_pmu_workarounds(cc);
}
@@ -480,6 +603,8 @@ void bcma_pmu_spuravoid_pllupdate(struct
tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
break;
+ case BCMA_CHIP_ID_BCM43131:
+ case BCMA_CHIP_ID_BCM43217:
case BCMA_CHIP_ID_BCM43227:
case BCMA_CHIP_ID_BCM43228:
case BCMA_CHIP_ID_BCM43428:
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -30,7 +30,7 @@ struct bcma_sflash_tbl_e {
u16 numblocks;
};
-static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
{ "M25P20", 0x11, 0x10000, 4, },
{ "M25P40", 0x12, 0x10000, 8, },
@@ -38,10 +38,10 @@ static struct bcma_sflash_tbl_e bcma_sfl
{ "M25P32", 0x15, 0x10000, 64, },
{ "M25P64", 0x16, 0x10000, 128, },
{ "M25FL128", 0x17, 0x10000, 256, },
- { 0 },
+ { NULL },
};
-static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
{ "SST25WF512", 1, 0x1000, 16, },
{ "SST25VF512", 0x48, 0x1000, 16, },
{ "SST25WF010", 2, 0x1000, 32, },
@@ -56,10 +56,10 @@ static struct bcma_sflash_tbl_e bcma_sfl
{ "SST25VF016", 0x41, 0x1000, 512, },
{ "SST25VF032", 0x4a, 0x1000, 1024, },
{ "SST25VF064", 0x4b, 0x1000, 2048, },
- { 0 },
+ { NULL },
};
-static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
{ "AT45DB011", 0xc, 256, 512, },
{ "AT45DB021", 0x14, 256, 1024, },
{ "AT45DB041", 0x1c, 256, 2048, },
@@ -67,7 +67,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
{ "AT45DB161", 0x2c, 512, 4096, },
{ "AT45DB321", 0x34, 512, 8192, },
{ "AT45DB642", 0x3c, 1024, 8192, },
- { 0 },
+ { NULL },
};
static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc
{
struct bcma_bus *bus = cc->core->bus;
struct bcma_sflash *sflash = &cc->sflash;
- struct bcma_sflash_tbl_e *e;
+ const struct bcma_sflash_tbl_e *e;
u32 id, id2;
switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
--- a/drivers/bcma/driver_gpio.c
+++ b/drivers/bcma/driver_gpio.c
@@ -9,6 +9,9 @@
*/
#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
#include <linux/export.h>
#include <linux/bcma/bcma.h>
@@ -73,19 +76,136 @@ static void bcma_gpio_free(struct gpio_c
bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
}
+#if IS_BUILTIN(CONFIG_BCMA_HOST_SOC)
static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
- return bcma_core_irq(cc->core);
+ return irq_find_mapping(cc->irq_domain, gpio);
else
return -EINVAL;
}
+static void bcma_gpio_irq_unmask(struct irq_data *d)
+{
+ struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
+ int gpio = irqd_to_hwirq(d);
+ u32 val = bcma_chipco_gpio_in(cc, BIT(gpio));
+
+ bcma_chipco_gpio_polarity(cc, BIT(gpio), val);
+ bcma_chipco_gpio_intmask(cc, BIT(gpio), BIT(gpio));
+}
+
+static void bcma_gpio_irq_mask(struct irq_data *d)
+{
+ struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d);
+ int gpio = irqd_to_hwirq(d);
+
+ bcma_chipco_gpio_intmask(cc, BIT(gpio), 0);
+}
+
+static struct irq_chip bcma_gpio_irq_chip = {
+ .name = "BCMA-GPIO",
+ .irq_mask = bcma_gpio_irq_mask,
+ .irq_unmask = bcma_gpio_irq_unmask,
+};
+
+static irqreturn_t bcma_gpio_irq_handler(int irq, void *dev_id)
+{
+ struct bcma_drv_cc *cc = dev_id;
+ u32 val = bcma_cc_read32(cc, BCMA_CC_GPIOIN);
+ u32 mask = bcma_cc_read32(cc, BCMA_CC_GPIOIRQ);
+ u32 pol = bcma_cc_read32(cc, BCMA_CC_GPIOPOL);
+ unsigned long irqs = (val ^ pol) & mask;
+ int gpio;
+
+ if (!irqs)
+ return IRQ_NONE;
+
+ for_each_set_bit(gpio, &irqs, cc->gpio.ngpio)
+ generic_handle_irq(bcma_gpio_to_irq(&cc->gpio, gpio));
+ bcma_chipco_gpio_polarity(cc, irqs, val & irqs);
+
+ return IRQ_HANDLED;
+}
+
+static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
+{
+ struct gpio_chip *chip = &cc->gpio;
+ int gpio, hwirq, err;
+
+ if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
+ return 0;
+
+ cc->irq_domain = irq_domain_add_linear(NULL, chip->ngpio,
+ &irq_domain_simple_ops, cc);
+ if (!cc->irq_domain) {
+ err = -ENODEV;
+ goto err_irq_domain;
+ }
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_create_mapping(cc->irq_domain, gpio);
+
+ irq_set_chip_data(irq, cc);
+ irq_set_chip_and_handler(irq, &bcma_gpio_irq_chip,
+ handle_simple_irq);
+ }
+
+ hwirq = bcma_core_irq(cc->core);
+ err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
+ cc);
+ if (err)
+ goto err_req_irq;
+
+ bcma_chipco_gpio_intmask(cc, ~0, 0);
+ bcma_cc_set32(cc, BCMA_CC_IRQMASK, BCMA_CC_IRQ_GPIO);
+
+ return 0;
+
+err_req_irq:
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(cc->irq_domain, gpio);
+
+ irq_dispose_mapping(irq);
+ }
+ irq_domain_remove(cc->irq_domain);
+err_irq_domain:
+ return err;
+}
+
+static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
+{
+ struct gpio_chip *chip = &cc->gpio;
+ int gpio;
+
+ if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC)
+ return;
+
+ bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
+ free_irq(bcma_core_irq(cc->core), cc);
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(cc->irq_domain, gpio);
+
+ irq_dispose_mapping(irq);
+ }
+ irq_domain_remove(cc->irq_domain);
+}
+#else
+static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc)
+{
+ return 0;
+}
+
+static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc)
+{
+}
+#endif
+
int bcma_gpio_init(struct bcma_drv_cc *cc)
{
struct gpio_chip *chip = &cc->gpio;
+ int err;
chip->label = "bcma_gpio";
chip->owner = THIS_MODULE;
@@ -95,8 +215,18 @@ int bcma_gpio_init(struct bcma_drv_cc *c
chip->set = bcma_gpio_set_value;
chip->direction_input = bcma_gpio_direction_input;
chip->direction_output = bcma_gpio_direction_output;
+#if IS_BUILTIN(CONFIG_BCMA_HOST_SOC)
chip->to_irq = bcma_gpio_to_irq;
- chip->ngpio = 16;
+#endif
+ switch (cc->core->bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM5357:
+ case BCMA_CHIP_ID_BCM53572:
+ chip->ngpio = 32;
+ break;
+ default:
+ chip->ngpio = 16;
+ }
+
/* There is just one SoC in one device and its GPIO addresses should be
* deterministic to address them more easily. The other buses could get
* a random base number. */
@@ -105,10 +235,21 @@ int bcma_gpio_init(struct bcma_drv_cc *c
else
chip->base = -1;
- return gpiochip_add(chip);
+ err = bcma_gpio_irq_domain_init(cc);
+ if (err)
+ return err;
+
+ err = gpiochip_add(chip);
+ if (err) {
+ bcma_gpio_irq_domain_exit(cc);
+ return err;
+ }
+
+ return 0;
}
int bcma_gpio_unregister(struct bcma_drv_cc *cc)
{
+ bcma_gpio_irq_domain_exit(cc);
return gpiochip_remove(&cc->gpio);
}
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -31,7 +31,7 @@ static void bcma_pcie_write(struct bcma_
pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data);
}
-static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy)
{
u32 v;
int i;
@@ -55,7 +55,7 @@ static void bcma_pcie_mdio_set_phy(struc
}
}
-static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address)
{
int max_retries = 10;
u16 ret = 0;
@@ -98,7 +98,7 @@ static u16 bcma_pcie_mdio_read(struct bc
return ret;
}
-static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device,
+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device,
u8 address, u16 data)
{
int max_retries = 10;
@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct
pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
}
+static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device,
+ u8 address, u16 data)
+{
+ bcma_pcie_mdio_write(pc, device, address, data);
+ return bcma_pcie_mdio_read(pc, device, address);
+}
+
/**************************************************
* Workarounds.
**************************************************/
@@ -229,6 +236,32 @@ void bcma_core_pci_init(struct bcma_drv_
bcma_core_pci_clientmode_init(pc);
}
+void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
+{
+ struct bcma_drv_pci *pc;
+ u16 data;
+
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
+ return;
+
+ pc = &bus->drv_pci[0];
+
+ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) {
+ data = up ? 0x74 : 0x7C;
+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64);
+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
+ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) {
+ data = up ? 0x75 : 0x7D;
+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65);
+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
+ }
+}
+EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
+
int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
bool enable)
{
@@ -262,7 +295,7 @@ out:
}
EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
-void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
+static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
{
u32 w;
@@ -274,4 +307,29 @@ void bcma_core_pci_extend_L1timer(struct
bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w);
bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
}
-EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer);
+
+void bcma_core_pci_up(struct bcma_bus *bus)
+{
+ struct bcma_drv_pci *pc;
+
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
+ return;
+
+ pc = &bus->drv_pci[0];
+
+ bcma_core_pci_extend_L1timer(pc, true);
+}
+EXPORT_SYMBOL_GPL(bcma_core_pci_up);
+
+void bcma_core_pci_down(struct bcma_bus *bus)
+{
+ struct bcma_drv_pci *pc;
+
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
+ return;
+
+ pc = &bus->drv_pci[0];
+
+ bcma_core_pci_extend_L1timer(pc, false);
+}
+EXPORT_SYMBOL_GPL(bcma_core_pci_down);
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
@@ -581,6 +581,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI
int bcma_core_pci_plat_dev_init(struct pci_dev *dev)
{
struct bcma_drv_pci_host *pc_host;
+ int readrq;
if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
/* This is not a device on the PCI-core bridge. */
@@ -595,6 +596,11 @@ int bcma_core_pci_plat_dev_init(struct p
dev->irq = bcma_core_irq(pc_host->pdev->core);
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ readrq = pcie_get_readrq(dev);
+ if (readrq > 128) {
+ pr_info("change PCIe max read request size from %i to 128\n", readrq);
+ pcie_set_readrq(dev, 128);
+ }
return 0;
}
EXPORT_SYMBOL(bcma_core_pci_plat_dev_init);
--- /dev/null
+++ b/drivers/bcma/driver_pcie2.c
@@ -0,0 +1,175 @@
+/*
+ * Broadcom specific AMBA
+ * PCIe Gen 2 Core
+ *
+ * Copyright 2014, Broadcom Corporation
+ * Copyright 2014, Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+/**************************************************
+ * R/W ops.
+ **************************************************/
+
+#if 0
+static u32 bcma_core_pcie2_cfg_read(struct bcma_drv_pcie2 *pcie2, u32 addr)
+{
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDADDR, addr);
+ pcie2_read32(pcie2, BCMA_CORE_PCIE2_CONFIGINDADDR);
+ return pcie2_read32(pcie2, BCMA_CORE_PCIE2_CONFIGINDDATA);
+}
+#endif
+
+static void bcma_core_pcie2_cfg_write(struct bcma_drv_pcie2 *pcie2, u32 addr,
+ u32 val)
+{
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDADDR, addr);
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDDATA, val);
+}
+
+/**************************************************
+ * Init.
+ **************************************************/
+
+static u32 bcma_core_pcie2_war_delay_perst_enab(struct bcma_drv_pcie2 *pcie2,
+ bool enable)
+{
+ u32 val;
+
+ /* restore back to default */
+ val = pcie2_read32(pcie2, BCMA_CORE_PCIE2_CLK_CONTROL);
+ val |= PCIE2_CLKC_DLYPERST;
+ val &= ~PCIE2_CLKC_DISSPROMLD;
+ if (enable) {
+ val &= ~PCIE2_CLKC_DLYPERST;
+ val |= PCIE2_CLKC_DISSPROMLD;
+ }
+ pcie2_write32(pcie2, (BCMA_CORE_PCIE2_CLK_CONTROL), val);
+ /* flush */
+ return pcie2_read32(pcie2, BCMA_CORE_PCIE2_CLK_CONTROL);
+}
+
+static void bcma_core_pcie2_set_ltr_vals(struct bcma_drv_pcie2 *pcie2)
+{
+ /* LTR0 */
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDADDR, 0x844);
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDDATA, 0x883c883c);
+ /* LTR1 */
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDADDR, 0x848);
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDDATA, 0x88648864);
+ /* LTR2 */
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDADDR, 0x84C);
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDDATA, 0x90039003);
+}
+
+static void bcma_core_pcie2_hw_ltr_war(struct bcma_drv_pcie2 *pcie2)
+{
+ u8 core_rev = pcie2->core->id.rev;
+ u32 devstsctr2;
+
+ if (core_rev < 2 || core_rev == 10 || core_rev > 13)
+ return;
+
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDADDR,
+ PCIE2_CAP_DEVSTSCTRL2_OFFSET);
+ devstsctr2 = pcie2_read32(pcie2, BCMA_CORE_PCIE2_CONFIGINDDATA);
+ if (devstsctr2 & PCIE2_CAP_DEVSTSCTRL2_LTRENAB) {
+ /* force the right LTR values */
+ bcma_core_pcie2_set_ltr_vals(pcie2);
+
+ /* TODO:
+ si_core_wrapperreg(pcie2, 3, 0x60, 0x8080, 0); */
+
+ /* enable the LTR */
+ devstsctr2 |= PCIE2_CAP_DEVSTSCTRL2_LTRENAB;
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDADDR,
+ PCIE2_CAP_DEVSTSCTRL2_OFFSET);
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDDATA, devstsctr2);
+
+ /* set the LTR state to be active */
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_LTR_STATE,
+ PCIE2_LTR_ACTIVE);
+ usleep_range(1000, 2000);
+
+ /* set the LTR state to be sleep */
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_LTR_STATE,
+ PCIE2_LTR_SLEEP);
+ usleep_range(1000, 2000);
+ }
+}
+
+static void pciedev_crwlpciegen2(struct bcma_drv_pcie2 *pcie2)
+{
+ u8 core_rev = pcie2->core->id.rev;
+ bool pciewar160, pciewar162;
+
+ pciewar160 = core_rev == 7 || core_rev == 9 || core_rev == 11;
+ pciewar162 = core_rev == 5 || core_rev == 7 || core_rev == 8 ||
+ core_rev == 9 || core_rev == 11;
+
+ if (!pciewar160 && !pciewar162)
+ return;
+
+/* TODO */
+#if 0
+ pcie2_set32(pcie2, BCMA_CORE_PCIE2_CLK_CONTROL,
+ PCIE_DISABLE_L1CLK_GATING);
+#if 0
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDADDR,
+ PCIEGEN2_COE_PVT_TL_CTRL_0);
+ pcie2_mask32(pcie2, BCMA_CORE_PCIE2_CONFIGINDDATA,
+ ~(1 << COE_PVT_TL_CTRL_0_PM_DIS_L1_REENTRY_BIT));
+#endif
+#endif
+}
+
+static void pciedev_crwlpciegen2_180(struct bcma_drv_pcie2 *pcie2)
+{
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDADDR, PCIE2_PMCR_REFUP);
+ pcie2_set32(pcie2, BCMA_CORE_PCIE2_CONFIGINDDATA, 0x1f);
+}
+
+static void pciedev_crwlpciegen2_182(struct bcma_drv_pcie2 *pcie2)
+{
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDADDR, PCIE2_SBMBX);
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDDATA, 1 << 0);
+}
+
+static void pciedev_reg_pm_clk_period(struct bcma_drv_pcie2 *pcie2)
+{
+ struct bcma_drv_cc *drv_cc = &pcie2->core->bus->drv_cc;
+ u8 core_rev = pcie2->core->id.rev;
+ u32 alp_khz, pm_value;
+
+ if (core_rev <= 13) {
+ alp_khz = bcma_pmu_get_alp_clock(drv_cc) / 1000;
+ pm_value = (1000000 * 2) / alp_khz;
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDADDR,
+ PCIE2_PVT_REG_PM_CLK_PERIOD);
+ pcie2_write32(pcie2, BCMA_CORE_PCIE2_CONFIGINDDATA, pm_value);
+ }
+}
+
+void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2)
+{
+ struct bcma_chipinfo *ci = &pcie2->core->bus->chipinfo;
+ u32 tmp;
+
+ tmp = pcie2_read32(pcie2, BCMA_CORE_PCIE2_SPROM(54));
+ if ((tmp & 0xe) >> 1 == 2)
+ bcma_core_pcie2_cfg_write(pcie2, 0x4e0, 0x17);
+
+ /* TODO: Do we need pcie_reqsize? */
+
+ if (ci->id == BCMA_CHIP_ID_BCM4360 && ci->rev > 3)
+ bcma_core_pcie2_war_delay_perst_enab(pcie2, true);
+ bcma_core_pcie2_hw_ltr_war(pcie2);
+ pciedev_crwlpciegen2(pcie2);
+ pciedev_reg_pm_clk_period(pcie2);
+ pciedev_crwlpciegen2_180(pcie2);
+ pciedev_crwlpciegen2_182(pcie2);
+}
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -188,8 +188,11 @@ static int bcma_host_pci_probe(struct pc
pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
/* SSB needed additional powering up, do we have any AMBA PCI cards? */
- if (!pci_is_pcie(dev))
- bcma_err(bus, "PCI card detected, report problems.\n");
+ if (!pci_is_pcie(dev)) {
+ bcma_err(bus, "PCI card detected, they are not supported.\n");
+ err = -ENXIO;
+ goto err_pci_release_regions;
+ }
/* Map MMIO */
err = -ENOMEM;
@@ -235,7 +238,6 @@ static void bcma_host_pci_remove(struct
pci_release_regions(dev);
pci_disable_device(dev);
kfree(bus);
- pci_set_drvdata(dev, NULL);
}
#ifdef CONFIG_PM_SLEEP
@@ -267,14 +269,18 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
#endif /* CONFIG_PM_SLEEP */
-static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+static const struct pci_device_id bcma_pci_bridge_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4313) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
{ 0, },
};
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -69,28 +69,36 @@ static u16 bcma_cc_core_id(struct bcma_b
return BCMA_CORE_CHIPCOMMON;
}
-struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
+struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
+ u8 unit)
{
struct bcma_device *core;
list_for_each_entry(core, &bus->cores, list) {
- if (core->id.id == coreid)
+ if (core->id.id == coreid && core->core_unit == unit)
return core;
}
return NULL;
}
-EXPORT_SYMBOL_GPL(bcma_find_core);
+EXPORT_SYMBOL_GPL(bcma_find_core_unit);
-struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
- u8 unit)
+bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
+ int timeout)
{
- struct bcma_device *core;
+ unsigned long deadline = jiffies + timeout;
+ u32 val;
- list_for_each_entry(core, &bus->cores, list) {
- if (core->id.id == coreid && core->core_unit == unit)
- return core;
- }
- return NULL;
+ do {
+ val = bcma_read32(core, reg);
+ if ((val & mask) == value)
+ return true;
+ cpu_relax();
+ udelay(10);
+ } while (!time_after_eq(jiffies, deadline));
+
+ bcma_warn(core->bus, "Timeout waiting for register 0x%04X!\n", reg);
+
+ return false;
}
static void bcma_release_core_dev(struct device *dev)
@@ -115,6 +123,7 @@ static int bcma_register_cores(struct bc
case BCMA_CORE_CHIPCOMMON:
case BCMA_CORE_PCI:
case BCMA_CORE_PCIE:
+ case BCMA_CORE_PCIE2:
case BCMA_CORE_MIPS_74K:
case BCMA_CORE_4706_MAC_GBIT_COMMON:
continue;
@@ -148,6 +157,7 @@ static int bcma_register_cores(struct bc
bcma_err(bus,
"Could not register dev for core 0x%03X\n",
core->id.id);
+ put_device(&core->dev);
continue;
}
core->dev_registered = true;
@@ -218,7 +228,7 @@ int bcma_bus_register(struct bcma_bus *b
err = bcma_bus_scan(bus);
if (err) {
bcma_err(bus, "Failed to scan: %d\n", err);
- return -1;
+ return err;
}
/* Early init CC core */
@@ -263,6 +273,13 @@ int bcma_bus_register(struct bcma_bus *b
bcma_core_pci_init(&bus->drv_pci[1]);
}
+ /* Init PCIe Gen 2 core */
+ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE2, 0);
+ if (core) {
+ bus->drv_pcie2.core = core;
+ bcma_core_pcie2_init(&bus->drv_pcie2);
+ }
+
/* Init GBIT MAC COMMON core */
core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
if (core) {
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -32,6 +32,18 @@ static const struct bcma_device_id_name
{ BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" },
{ BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" },
{ BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" },
+ { BCMA_CORE_PCIEG2, "PCIe Gen 2" },
+ { BCMA_CORE_DMA, "DMA" },
+ { BCMA_CORE_SDIO3, "SDIO3" },
+ { BCMA_CORE_USB20, "USB 2.0" },
+ { BCMA_CORE_USB30, "USB 3.0" },
+ { BCMA_CORE_A9JTAG, "ARM Cortex A9 JTAG" },
+ { BCMA_CORE_DDR23, "Denali DDR2/DDR3 memory controller" },
+ { BCMA_CORE_ROM, "ROM" },
+ { BCMA_CORE_NAND, "NAND flash controller" },
+ { BCMA_CORE_QSPI, "SPI flash controller" },
+ { BCMA_CORE_CHIPCOMMON_B, "Chipcommon B" },
+ { BCMA_CORE_ARMCA9, "ARM Cortex A9 core (ihost)" },
{ BCMA_CORE_AMEMC, "AMEMC (DDR)" },
{ BCMA_CORE_ALTA, "ALTA (I2S)" },
{ BCMA_CORE_INVALID, "Invalid" },
@@ -201,7 +213,7 @@ static s32 bcma_erom_get_mst_port(struct
return ent;
}
-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
+static u32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
u32 type, u8 port)
{
u32 addrl, addrh, sizel, sizeh = 0;
@@ -213,7 +225,7 @@ static s32 bcma_erom_get_addr_desc(struc
((ent & SCAN_ADDR_TYPE) != type) ||
(((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) {
bcma_erom_push_ent(eromptr);
- return -EINVAL;
+ return (u32)-EINVAL;
}
addrl = ent & SCAN_ADDR_ADDR;
@@ -257,11 +269,13 @@ static struct bcma_device *bcma_find_cor
return NULL;
}
+#define IS_ERR_VALUE_U32(x) ((x) >= (u32)-MAX_ERRNO)
+
static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
struct bcma_device_id *match, int core_num,
struct bcma_device *core)
{
- s32 tmp;
+ u32 tmp;
u8 i, j;
s32 cia, cib;
u8 ports[2], wrappers[2];
@@ -339,11 +353,11 @@ static int bcma_get_next_core(struct bcm
* the main register space for the core
*/
tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
- if (tmp <= 0) {
+ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) {
/* Try again to see if it is a bridge */
tmp = bcma_erom_get_addr_desc(bus, eromptr,
SCAN_ADDR_TYPE_BRIDGE, 0);
- if (tmp <= 0) {
+ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) {
return -EILSEQ;
} else {
bcma_info(bus, "Bridge found\n");
@@ -357,7 +371,7 @@ static int bcma_get_next_core(struct bcm
for (j = 0; ; j++) {
tmp = bcma_erom_get_addr_desc(bus, eromptr,
SCAN_ADDR_TYPE_SLAVE, i);
- if (tmp < 0) {
+ if (IS_ERR_VALUE_U32(tmp)) {
/* no more entries for port _i_ */
/* pr_debug("erom: slave port %d "
* "has %d descriptors\n", i, j); */
@@ -374,7 +388,7 @@ static int bcma_get_next_core(struct bcm
for (j = 0; ; j++) {
tmp = bcma_erom_get_addr_desc(bus, eromptr,
SCAN_ADDR_TYPE_MWRAP, i);
- if (tmp < 0) {
+ if (IS_ERR_VALUE_U32(tmp)) {
/* no more entries for port _i_ */
/* pr_debug("erom: master wrapper %d "
* "has %d descriptors\n", i, j); */
@@ -392,7 +406,7 @@ static int bcma_get_next_core(struct bcm
for (j = 0; ; j++) {
tmp = bcma_erom_get_addr_desc(bus, eromptr,
SCAN_ADDR_TYPE_SWRAP, i + hack);
- if (tmp < 0) {
+ if (IS_ERR_VALUE_U32(tmp)) {
/* no more entries for port _i_ */
/* pr_debug("erom: master wrapper %d "
* has %d descriptors\n", i, j); */
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -72,12 +72,12 @@ fail:
* R/W ops.
**************************************************/
-static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
+static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom,
+ size_t words)
{
int i;
- for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
- sprom[i] = bcma_read16(bus->drv_cc.core,
- offset + (i * 2));
+ for (i = 0; i < words; i++)
+ sprom[i] = bcma_read16(bus->drv_cc.core, offset + (i * 2));
}
/**************************************************
@@ -124,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da
return t[crc ^ data];
}
-static u8 bcma_sprom_crc(const u16 *sprom)
+static u8 bcma_sprom_crc(const u16 *sprom, size_t words)
{
int word;
u8 crc = 0xFF;
- for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
+ for (word = 0; word < words - 1; word++) {
crc = bcma_crc8(crc, sprom[word] & 0x00FF);
crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
}
- crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
+ crc = bcma_crc8(crc, sprom[words - 1] & 0x00FF);
crc ^= 0xFF;
return crc;
}
-static int bcma_sprom_check_crc(const u16 *sprom)
+static int bcma_sprom_check_crc(const u16 *sprom, size_t words)
{
u8 crc;
u8 expected_crc;
u16 tmp;
- crc = bcma_sprom_crc(sprom);
- tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
+ crc = bcma_sprom_crc(sprom, words);
+ tmp = sprom[words - 1] & SSB_SPROM_REVISION_CRC;
expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
if (crc != expected_crc)
return -EPROTO;
@@ -154,21 +154,25 @@ static int bcma_sprom_check_crc(const u1
return 0;
}
-static int bcma_sprom_valid(const u16 *sprom)
+static int bcma_sprom_valid(struct bcma_bus *bus, const u16 *sprom,
+ size_t words)
{
u16 revision;
int err;
- err = bcma_sprom_check_crc(sprom);
+ err = bcma_sprom_check_crc(sprom, words);
if (err)
return err;
- revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
- if (revision != 8 && revision != 9) {
+ revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
+ if (revision != 8 && revision != 9 && revision != 10) {
pr_err("Unsupported SPROM revision: %d\n", revision);
return -ENOENT;
}
+ bus->sprom.revision = revision;
+ bcma_debug(bus, "Found SPROM revision %d\n", revision);
+
return 0;
}
@@ -197,6 +201,23 @@ static int bcma_sprom_valid(const u16 *s
SPEX(_field[7], _offset + 14, _mask, _shift); \
} while (0)
+static s8 sprom_extract_antgain(const u16 *in, u16 offset, u16 mask, u16 shift)
+{
+ u16 v;
+ u8 gain;
+
+ v = in[SPOFF(offset)];
+ gain = (v & mask) >> shift;
+ if (gain == 0xFF) {
+ gain = 8; /* If unset use 2dBm */
+ } else {
+ /* Q5.2 Fractional part is stored in 0xC0 */
+ gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2);
+ }
+
+ return (s8)gain;
+}
+
static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
{
u16 v, o;
@@ -208,9 +229,6 @@ static void bcma_sprom_extract_r8(struct
BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
ARRAY_SIZE(bus->sprom.core_pwr_info));
- bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
- SSB_SPROM_REVISION_REV;
-
for (i = 0; i < 3; i++) {
v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
@@ -380,14 +398,22 @@ static void bcma_sprom_extract_r8(struct
SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, ~0, 0);
/* Extract the antenna gain values. */
- SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
- SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
- SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
- SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
- SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
- SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
- SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
- SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
+ bus->sprom.antenna_gain.a0 = sprom_extract_antgain(sprom,
+ SSB_SPROM8_AGAIN01,
+ SSB_SPROM8_AGAIN0,
+ SSB_SPROM8_AGAIN0_SHIFT);
+ bus->sprom.antenna_gain.a1 = sprom_extract_antgain(sprom,
+ SSB_SPROM8_AGAIN01,
+ SSB_SPROM8_AGAIN1,
+ SSB_SPROM8_AGAIN1_SHIFT);
+ bus->sprom.antenna_gain.a2 = sprom_extract_antgain(sprom,
+ SSB_SPROM8_AGAIN23,
+ SSB_SPROM8_AGAIN2,
+ SSB_SPROM8_AGAIN2_SHIFT);
+ bus->sprom.antenna_gain.a3 = sprom_extract_antgain(sprom,
+ SSB_SPROM8_AGAIN23,
+ SSB_SPROM8_AGAIN3,
+ SSB_SPROM8_AGAIN3_SHIFT);
SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
SSB_SPROM8_LEDDC_ON_SHIFT);
@@ -502,12 +528,14 @@ static bool bcma_sprom_onchip_available(
case BCMA_CHIP_ID_BCM4331:
present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
break;
-
+ case BCMA_CHIP_ID_BCM43142:
case BCMA_CHIP_ID_BCM43224:
case BCMA_CHIP_ID_BCM43225:
/* for these chips OTP is always available */
present = true;
break;
+ case BCMA_CHIP_ID_BCM43131:
+ case BCMA_CHIP_ID_BCM43217:
case BCMA_CHIP_ID_BCM43227:
case BCMA_CHIP_ID_BCM43228:
case BCMA_CHIP_ID_BCM43428:
@@ -550,7 +578,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
{
u16 offset = BCMA_CC_SPROM;
u16 *sprom;
- int err = 0;
+ size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4,
+ SSB_SPROMSIZE_WORDS_R10, };
+ int i, err = 0;
if (!bus->drv_cc.core)
return -EOPNOTSUPP;
@@ -579,32 +609,37 @@ int bcma_sprom_get(struct bcma_bus *bus)
}
}
- sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
- GFP_KERNEL);
- if (!sprom)
- return -ENOMEM;
-
if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
bcma_debug(bus, "SPROM offset 0x%x\n", offset);
- bcma_sprom_read(bus, offset, sprom);
+ for (i = 0; i < ARRAY_SIZE(sprom_sizes); i++) {
+ size_t words = sprom_sizes[i];
+
+ sprom = kcalloc(words, sizeof(u16), GFP_KERNEL);
+ if (!sprom)
+ return -ENOMEM;
+
+ bcma_sprom_read(bus, offset, sprom, words);
+ err = bcma_sprom_valid(bus, sprom, words);
+ if (!err)
+ break;
+
+ kfree(sprom);
+ }
if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4331 ||
bus->chipinfo.id == BCMA_CHIP_ID_BCM43431)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
- err = bcma_sprom_valid(sprom);
if (err) {
- bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
+ bcma_warn(bus, "Invalid SPROM read from the PCIe card, trying to use fallback SPROM\n");
err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
- goto out;
+ } else {
+ bcma_sprom_extract_r8(bus, sprom);
+ kfree(sprom);
}
- bcma_sprom_extract_r8(bus, sprom);
-
-out:
- kfree(sprom);
return err;
}
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -6,6 +6,7 @@
#include <linux/bcma/bcma_driver_chipcommon.h>
#include <linux/bcma/bcma_driver_pci.h>
+#include <linux/bcma/bcma_driver_pcie2.h>
#include <linux/bcma/bcma_driver_mips.h>
#include <linux/bcma/bcma_driver_gmac_cmn.h>
#include <linux/ssb/ssb.h> /* SPROM sharing */
@@ -72,7 +73,19 @@ struct bcma_host_ops {
/* Core-ID values. */
#define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */
#define BCMA_CORE_4706_CHIPCOMMON 0x500
+#define BCMA_CORE_PCIEG2 0x501
+#define BCMA_CORE_DMA 0x502
+#define BCMA_CORE_SDIO3 0x503
+#define BCMA_CORE_USB20 0x504
+#define BCMA_CORE_USB30 0x505
+#define BCMA_CORE_A9JTAG 0x506
+#define BCMA_CORE_DDR23 0x507
+#define BCMA_CORE_ROM 0x508
+#define BCMA_CORE_NAND 0x509
+#define BCMA_CORE_QSPI 0x50A
+#define BCMA_CORE_CHIPCOMMON_B 0x50B
#define BCMA_CORE_4706_SOC_RAM 0x50E
+#define BCMA_CORE_ARMCA9 0x510
#define BCMA_CORE_4706_MAC_GBIT 0x52D
#define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */
#define BCMA_CORE_ALTA 0x534 /* I2S core */
@@ -144,6 +157,10 @@ struct bcma_host_ops {
/* Chip IDs of PCIe devices */
#define BCMA_CHIP_ID_BCM4313 0x4313
+#define BCMA_CHIP_ID_BCM43142 43142
+#define BCMA_CHIP_ID_BCM43131 43131
+#define BCMA_CHIP_ID_BCM43217 43217
+#define BCMA_CHIP_ID_BCM43222 43222
#define BCMA_CHIP_ID_BCM43224 43224
#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
@@ -176,6 +193,11 @@ struct bcma_host_ops {
#define BCMA_PKG_ID_BCM5357 11
#define BCMA_CHIP_ID_BCM53572 53572
#define BCMA_PKG_ID_BCM47188 9
+#define BCMA_CHIP_ID_BCM4707 53010
+#define BCMA_PKG_ID_BCM4707 1
+#define BCMA_PKG_ID_BCM4708 2
+#define BCMA_PKG_ID_BCM4709 0
+#define BCMA_CHIP_ID_BCM53018 53018
/* Board types (on PCI usually equals to the subsystem dev id) */
/* BCM4313 */
@@ -315,6 +337,7 @@ struct bcma_bus {
struct bcma_drv_cc drv_cc;
struct bcma_drv_pci drv_pci[2];
+ struct bcma_drv_pcie2 drv_pcie2;
struct bcma_drv_mips drv_mips;
struct bcma_drv_gmac_cmn drv_gmac_cmn;
@@ -400,7 +423,14 @@ static inline void bcma_maskset16(struct
bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
}
-extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid);
+extern struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
+ u8 unit);
+static inline struct bcma_device *bcma_find_core(struct bcma_bus *bus,
+ u16 coreid)
+{
+ return bcma_find_core_unit(bus, coreid, 0);
+}
+
extern bool bcma_core_is_enabled(struct bcma_device *core);
extern void bcma_core_disable(struct bcma_device *core, u32 flags);
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -330,6 +330,8 @@
#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
+#define BCMA_CC_PMU_STAT_EXT_LPO_AVAIL 0x00000100
+#define BCMA_CC_PMU_STAT_WDRESET 0x00000080
#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
@@ -355,6 +357,11 @@
#define BCMA_CC_REGCTL_DATA 0x065C
#define BCMA_CC_PLLCTL_ADDR 0x0660
#define BCMA_CC_PLLCTL_DATA 0x0664
+#define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
+#define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
+#define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
+#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_MASK 0x80000000
+#define BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT 31
#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
/* NAND flash MLC controller registers (corerev >= 38) */
#define BCMA_CC_NAND_REVISION 0x0C00
@@ -435,6 +442,23 @@
#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007
#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0
+/* PMU rev 15 */
+#define BCMA_CC_PMU15_PLL_PLLCTL0 0
+#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_MASK 0x00000003
+#define BCMA_CC_PMU15_PLL_PC0_CLKSEL_SHIFT 0
+#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK 0x003FFFFC
+#define BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT 2
+#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_MASK 0x00C00000
+#define BCMA_CC_PMU15_PLL_PC0_PRESCALE_SHIFT 22
+#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_MASK 0x07000000
+#define BCMA_CC_PMU15_PLL_PC0_KPCTRL_SHIFT 24
+#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_MASK 0x38000000
+#define BCMA_CC_PMU15_PLL_PC0_FCNTCTRL_SHIFT 27
+#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_MASK 0x40000000
+#define BCMA_CC_PMU15_PLL_PC0_FDCMODE_SHIFT 30
+#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_MASK 0x80000000
+#define BCMA_CC_PMU15_PLL_PC0_CTRLBIAS_SHIFT 31
+
/* ALP clock on pre-PMU chips */
#define BCMA_CC_PMU_ALP_CLOCK 20000000
/* HT clock for systems with PMU-enabled chipcommon */
@@ -507,6 +531,37 @@
#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18)
#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19)
+#define BCMA_RES_4314_LPLDO_PU BIT(0)
+#define BCMA_RES_4314_PMU_SLEEP_DIS BIT(1)
+#define BCMA_RES_4314_PMU_BG_PU BIT(2)
+#define BCMA_RES_4314_CBUCK_LPOM_PU BIT(3)
+#define BCMA_RES_4314_CBUCK_PFM_PU BIT(4)
+#define BCMA_RES_4314_CLDO_PU BIT(5)
+#define BCMA_RES_4314_LPLDO2_LVM BIT(6)
+#define BCMA_RES_4314_WL_PMU_PU BIT(7)
+#define BCMA_RES_4314_LNLDO_PU BIT(8)
+#define BCMA_RES_4314_LDO3P3_PU BIT(9)
+#define BCMA_RES_4314_OTP_PU BIT(10)
+#define BCMA_RES_4314_XTAL_PU BIT(11)
+#define BCMA_RES_4314_WL_PWRSW_PU BIT(12)
+#define BCMA_RES_4314_LQ_AVAIL BIT(13)
+#define BCMA_RES_4314_LOGIC_RET BIT(14)
+#define BCMA_RES_4314_MEM_SLEEP BIT(15)
+#define BCMA_RES_4314_MACPHY_RET BIT(16)
+#define BCMA_RES_4314_WL_CORE_READY BIT(17)
+#define BCMA_RES_4314_ILP_REQ BIT(18)
+#define BCMA_RES_4314_ALP_AVAIL BIT(19)
+#define BCMA_RES_4314_MISC_PWRSW_PU BIT(20)
+#define BCMA_RES_4314_SYNTH_PWRSW_PU BIT(21)
+#define BCMA_RES_4314_RX_PWRSW_PU BIT(22)
+#define BCMA_RES_4314_RADIO_PU BIT(23)
+#define BCMA_RES_4314_VCO_LDO_PU BIT(24)
+#define BCMA_RES_4314_AFE_LDO_PU BIT(25)
+#define BCMA_RES_4314_RX_LDO_PU BIT(26)
+#define BCMA_RES_4314_TX_LDO_PU BIT(27)
+#define BCMA_RES_4314_HT_AVAIL BIT(28)
+#define BCMA_RES_4314_MACPHY_CLK_AVAIL BIT(29)
+
/* Data for the PMU, if available.
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
*/
@@ -585,6 +640,7 @@ struct bcma_drv_cc {
spinlock_t gpio_lock;
#ifdef CONFIG_BCMA_DRIVER_GPIO
struct gpio_chip gpio;
+ struct irq_domain *irq_domain;
#endif
};
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -181,10 +181,31 @@ struct pci_dev;
#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8
+#define BCMA_CORE_PCI_
+
+/* MDIO devices (SERDES modules) */
+#define BCMA_CORE_PCI_MDIO_IEEE0 0x000
+#define BCMA_CORE_PCI_MDIO_IEEE1 0x001
+#define BCMA_CORE_PCI_MDIO_BLK0 0x800
+#define BCMA_CORE_PCI_MDIO_BLK1 0x801
+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16
+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17
+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18
+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19
+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A
+#define BCMA_CORE_PCI_MDIO_BLK2 0x802
+#define BCMA_CORE_PCI_MDIO_BLK3 0x803
+#define BCMA_CORE_PCI_MDIO_BLK4 0x804
+#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */
+#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820
+#define BCMA_CORE_PCI_MDIO_SERDESID 0x831
+#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840
+
/* PCIE Root Capability Register bits (Host mode only) */
#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001
struct bcma_drv_pci;
+struct bcma_bus;
#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
struct bcma_drv_pci_host {
@@ -219,7 +240,9 @@ struct bcma_drv_pci {
extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
struct bcma_device *core, bool enable);
-extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend);
+extern void bcma_core_pci_up(struct bcma_bus *bus);
+extern void bcma_core_pci_down(struct bcma_bus *bus);
+extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_pcie2.h
@@ -0,0 +1,158 @@
+#ifndef LINUX_BCMA_DRIVER_PCIE2_H_
+#define LINUX_BCMA_DRIVER_PCIE2_H_
+
+#define BCMA_CORE_PCIE2_CLK_CONTROL 0x0000
+#define PCIE2_CLKC_RST_OE 0x0001 /* When set, drives PCI_RESET out to pin */
+#define PCIE2_CLKC_RST 0x0002 /* Value driven out to pin */
+#define PCIE2_CLKC_SPERST 0x0004 /* SurvivePeRst */
+#define PCIE2_CLKC_DISABLE_L1CLK_GATING 0x0010
+#define PCIE2_CLKC_DLYPERST 0x0100 /* Delay PeRst to CoE Core */
+#define PCIE2_CLKC_DISSPROMLD 0x0200 /* DisableSpromLoadOnPerst */
+#define PCIE2_CLKC_WAKE_MODE_L2 0x1000 /* Wake on L2 */
+#define BCMA_CORE_PCIE2_RC_PM_CONTROL 0x0004
+#define BCMA_CORE_PCIE2_RC_PM_STATUS 0x0008
+#define BCMA_CORE_PCIE2_EP_PM_CONTROL 0x000C
+#define BCMA_CORE_PCIE2_EP_PM_STATUS 0x0010
+#define BCMA_CORE_PCIE2_EP_LTR_CONTROL 0x0014
+#define BCMA_CORE_PCIE2_EP_LTR_STATUS 0x0018
+#define BCMA_CORE_PCIE2_EP_OBFF_STATUS 0x001C
+#define BCMA_CORE_PCIE2_PCIE_ERR_STATUS 0x0020
+#define BCMA_CORE_PCIE2_RC_AXI_CONFIG 0x0100
+#define BCMA_CORE_PCIE2_EP_AXI_CONFIG 0x0104
+#define BCMA_CORE_PCIE2_RXDEBUG_STATUS0 0x0108
+#define BCMA_CORE_PCIE2_RXDEBUG_CONTROL0 0x010C
+#define BCMA_CORE_PCIE2_CONFIGINDADDR 0x0120
+#define BCMA_CORE_PCIE2_CONFIGINDDATA 0x0124
+#define BCMA_CORE_PCIE2_MDIOCONTROL 0x0128
+#define BCMA_CORE_PCIE2_MDIOWRDATA 0x012C
+#define BCMA_CORE_PCIE2_MDIORDDATA 0x0130
+#define BCMA_CORE_PCIE2_DATAINTF 0x0180
+#define BCMA_CORE_PCIE2_D2H_INTRLAZY_0 0x0188
+#define BCMA_CORE_PCIE2_H2D_INTRLAZY_0 0x018c
+#define BCMA_CORE_PCIE2_H2D_INTSTAT_0 0x0190
+#define BCMA_CORE_PCIE2_H2D_INTMASK_0 0x0194
+#define BCMA_CORE_PCIE2_D2H_INTSTAT_0 0x0198
+#define BCMA_CORE_PCIE2_D2H_INTMASK_0 0x019c
+#define BCMA_CORE_PCIE2_LTR_STATE 0x01A0 /* Latency Tolerance Reporting */
+#define PCIE2_LTR_ACTIVE 2
+#define PCIE2_LTR_ACTIVE_IDLE 1
+#define PCIE2_LTR_SLEEP 0
+#define PCIE2_LTR_FINAL_MASK 0x300
+#define PCIE2_LTR_FINAL_SHIFT 8
+#define BCMA_CORE_PCIE2_PWR_INT_STATUS 0x01A4
+#define BCMA_CORE_PCIE2_PWR_INT_MASK 0x01A8
+#define BCMA_CORE_PCIE2_CFG_ADDR 0x01F8
+#define BCMA_CORE_PCIE2_CFG_DATA 0x01FC
+#define BCMA_CORE_PCIE2_SYS_EQ_PAGE 0x0200
+#define BCMA_CORE_PCIE2_SYS_MSI_PAGE 0x0204
+#define BCMA_CORE_PCIE2_SYS_MSI_INTREN 0x0208
+#define BCMA_CORE_PCIE2_SYS_MSI_CTRL0 0x0210
+#define BCMA_CORE_PCIE2_SYS_MSI_CTRL1 0x0214
+#define BCMA_CORE_PCIE2_SYS_MSI_CTRL2 0x0218
+#define BCMA_CORE_PCIE2_SYS_MSI_CTRL3 0x021C
+#define BCMA_CORE_PCIE2_SYS_MSI_CTRL4 0x0220
+#define BCMA_CORE_PCIE2_SYS_MSI_CTRL5 0x0224
+#define BCMA_CORE_PCIE2_SYS_EQ_HEAD0 0x0250
+#define BCMA_CORE_PCIE2_SYS_EQ_TAIL0 0x0254
+#define BCMA_CORE_PCIE2_SYS_EQ_HEAD1 0x0258
+#define BCMA_CORE_PCIE2_SYS_EQ_TAIL1 0x025C
+#define BCMA_CORE_PCIE2_SYS_EQ_HEAD2 0x0260
+#define BCMA_CORE_PCIE2_SYS_EQ_TAIL2 0x0264
+#define BCMA_CORE_PCIE2_SYS_EQ_HEAD3 0x0268
+#define BCMA_CORE_PCIE2_SYS_EQ_TAIL3 0x026C
+#define BCMA_CORE_PCIE2_SYS_EQ_HEAD4 0x0270
+#define BCMA_CORE_PCIE2_SYS_EQ_TAIL4 0x0274
+#define BCMA_CORE_PCIE2_SYS_EQ_HEAD5 0x0278
+#define BCMA_CORE_PCIE2_SYS_EQ_TAIL5 0x027C
+#define BCMA_CORE_PCIE2_SYS_RC_INTX_EN 0x0330
+#define BCMA_CORE_PCIE2_SYS_RC_INTX_CSR 0x0334
+#define BCMA_CORE_PCIE2_SYS_MSI_REQ 0x0340
+#define BCMA_CORE_PCIE2_SYS_HOST_INTR_EN 0x0344
+#define BCMA_CORE_PCIE2_SYS_HOST_INTR_CSR 0x0348
+#define BCMA_CORE_PCIE2_SYS_HOST_INTR0 0x0350
+#define BCMA_CORE_PCIE2_SYS_HOST_INTR1 0x0354
+#define BCMA_CORE_PCIE2_SYS_HOST_INTR2 0x0358
+#define BCMA_CORE_PCIE2_SYS_HOST_INTR3 0x035C
+#define BCMA_CORE_PCIE2_SYS_EP_INT_EN0 0x0360
+#define BCMA_CORE_PCIE2_SYS_EP_INT_EN1 0x0364
+#define BCMA_CORE_PCIE2_SYS_EP_INT_CSR0 0x0370
+#define BCMA_CORE_PCIE2_SYS_EP_INT_CSR1 0x0374
+#define BCMA_CORE_PCIE2_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2))
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_0 0x0C00
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_1 0x0C04
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_2 0x0C08
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_3 0x0C0C
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_4 0x0C10
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_5 0x0C14
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_6 0x0C18
+#define BCMA_CORE_PCIE2_FUNC0_IMAP0_7 0x0C1C
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_0 0x0C20
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_1 0x0C24
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_2 0x0C28
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_3 0x0C2C
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_4 0x0C30
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_5 0x0C34
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_6 0x0C38
+#define BCMA_CORE_PCIE2_FUNC1_IMAP0_7 0x0C3C
+#define BCMA_CORE_PCIE2_FUNC0_IMAP1 0x0C80
+#define BCMA_CORE_PCIE2_FUNC1_IMAP1 0x0C88
+#define BCMA_CORE_PCIE2_FUNC0_IMAP2 0x0CC0
+#define BCMA_CORE_PCIE2_FUNC1_IMAP2 0x0CC8
+#define BCMA_CORE_PCIE2_IARR0_LOWER 0x0D00
+#define BCMA_CORE_PCIE2_IARR0_UPPER 0x0D04
+#define BCMA_CORE_PCIE2_IARR1_LOWER 0x0D08
+#define BCMA_CORE_PCIE2_IARR1_UPPER 0x0D0C
+#define BCMA_CORE_PCIE2_IARR2_LOWER 0x0D10
+#define BCMA_CORE_PCIE2_IARR2_UPPER 0x0D14
+#define BCMA_CORE_PCIE2_OARR0 0x0D20
+#define BCMA_CORE_PCIE2_OARR1 0x0D28
+#define BCMA_CORE_PCIE2_OARR2 0x0D30
+#define BCMA_CORE_PCIE2_OMAP0_LOWER 0x0D40
+#define BCMA_CORE_PCIE2_OMAP0_UPPER 0x0D44
+#define BCMA_CORE_PCIE2_OMAP1_LOWER 0x0D48
+#define BCMA_CORE_PCIE2_OMAP1_UPPER 0x0D4C
+#define BCMA_CORE_PCIE2_OMAP2_LOWER 0x0D50
+#define BCMA_CORE_PCIE2_OMAP2_UPPER 0x0D54
+#define BCMA_CORE_PCIE2_FUNC1_IARR1_SIZE 0x0D58
+#define BCMA_CORE_PCIE2_FUNC1_IARR2_SIZE 0x0D5C
+#define BCMA_CORE_PCIE2_MEM_CONTROL 0x0F00
+#define BCMA_CORE_PCIE2_MEM_ECC_ERRLOG0 0x0F04
+#define BCMA_CORE_PCIE2_MEM_ECC_ERRLOG1 0x0F08
+#define BCMA_CORE_PCIE2_LINK_STATUS 0x0F0C
+#define BCMA_CORE_PCIE2_STRAP_STATUS 0x0F10
+#define BCMA_CORE_PCIE2_RESET_STATUS 0x0F14
+#define BCMA_CORE_PCIE2_RESETEN_IN_LINKDOWN 0x0F18
+#define BCMA_CORE_PCIE2_MISC_INTR_EN 0x0F1C
+#define BCMA_CORE_PCIE2_TX_DEBUG_CFG 0x0F20
+#define BCMA_CORE_PCIE2_MISC_CONFIG 0x0F24
+#define BCMA_CORE_PCIE2_MISC_STATUS 0x0F28
+#define BCMA_CORE_PCIE2_INTR_EN 0x0F30
+#define BCMA_CORE_PCIE2_INTR_CLEAR 0x0F34
+#define BCMA_CORE_PCIE2_INTR_STATUS 0x0F38
+
+/* PCIE gen2 config regs */
+#define PCIE2_INTSTATUS 0x090
+#define PCIE2_INTMASK 0x094
+#define PCIE2_SBMBX 0x098
+
+#define PCIE2_PMCR_REFUP 0x1814 /* Trefup time */
+
+#define PCIE2_CAP_DEVSTSCTRL2_OFFSET 0xD4
+#define PCIE2_CAP_DEVSTSCTRL2_LTRENAB 0x400
+#define PCIE2_PVT_REG_PM_CLK_PERIOD 0x184c
+
+struct bcma_drv_pcie2 {
+ struct bcma_device *core;
+};
+
+#define pcie2_read16(pcie2, offset) bcma_read16((pcie2)->core, offset)
+#define pcie2_read32(pcie2, offset) bcma_read32((pcie2)->core, offset)
+#define pcie2_write16(pcie2, offset, val) bcma_write16((pcie2)->core, offset, val)
+#define pcie2_write32(pcie2, offset, val) bcma_write32((pcie2)->core, offset, val)
+
+#define pcie2_set32(pcie2, offset, set) bcma_set32((pcie2)->core, offset, set)
+#define pcie2_mask32(pcie2, offset, mask) bcma_mask32((pcie2)->core, offset, mask)
+
+void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2);
+
+#endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
@@ -679,27 +679,6 @@ bool ai_clkctl_cc(struct si_pub *sih, en
return mode == BCMA_CLKMODE_FAST;
}
-void ai_pci_up(struct si_pub *sih)
-{
- struct si_info *sii;
-
- sii = container_of(sih, struct si_info, pub);
-
- if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI)
- bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], true);
-}
-
-/* Unconfigure and/or apply various WARs when going down */
-void ai_pci_down(struct si_pub *sih)
-{
- struct si_info *sii;
-
- sii = container_of(sih, struct si_info, pub);
-
- if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI)
- bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], false);
-}
-
/* Enable BT-COEX & Ex-PA for 4313 */
void ai_epa_4313war(struct si_pub *sih)
{
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h
@@ -183,9 +183,6 @@ extern u16 ai_clkctl_fast_pwrup_delay(st
extern bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode);
extern bool ai_deviceremoved(struct si_pub *sih);
-extern void ai_pci_down(struct si_pub *sih);
-extern void ai_pci_up(struct si_pub *sih);
-
/* Enable Ex-PA for 4313 */
extern void ai_epa_4313war(struct si_pub *sih);
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -4667,7 +4667,7 @@ static int brcms_b_attach(struct brcms_c
brcms_c_coredisable(wlc_hw);
/* Match driver "down" state */
- ai_pci_down(wlc_hw->sih);
+ bcma_core_pci_down(wlc_hw->d11core->bus);
/* turn off pll and xtal to match driver "down" state */
brcms_b_xtal(wlc_hw, OFF);
@@ -5010,12 +5010,12 @@ static int brcms_b_up_prep(struct brcms_
*/
if (brcms_b_radio_read_hwdisabled(wlc_hw)) {
/* put SB PCI in down state again */
- ai_pci_down(wlc_hw->sih);
+ bcma_core_pci_down(wlc_hw->d11core->bus);
brcms_b_xtal(wlc_hw, OFF);
return -ENOMEDIUM;
}
- ai_pci_up(wlc_hw->sih);
+ bcma_core_pci_up(wlc_hw->d11core->bus);
/* reset the d11 core */
brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS);
@@ -5212,7 +5212,7 @@ static int brcms_b_down_finish(struct br
/* turn off primary xtal and pll */
if (!wlc_hw->noreset) {
- ai_pci_down(wlc_hw->sih);
+ bcma_core_pci_down(wlc_hw->d11core->bus);
brcms_b_xtal(wlc_hw, OFF);
}
}
Reference in New Issue View Git Blame Copy Permalink