OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Rafał Miłecki b84a8b0543 nvram: fix displayed info about NVRAM size
Use actual partition size and content offset to calculate it.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46260

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-07-08 05:45:09 +00:00
config build: enable package list signing by default 2015-05-05 21:16:13 +00:00
docs docs: Fix typo buysbox -> busybox. 2015-04-09 10:32:26 +00:00
include CC: kernel: update 3.18 to 3.18.17 2015-07-01 00:32:10 +00:00
package nvram: fix displayed info about NVRAM size 2015-07-08 05:45:09 +00:00
scripts scripts/feeds: observe -p flag for preferential feeds 2015-07-07 11:30:39 +00:00
target ar71xx: fix kernel Oops in at803x_link_change_notify 2015-07-07 21:52:29 +00:00
toolchain gcc: remove version 4.9 2015-06-14 18:17:49 +00:00
tools ar71xx: add support for TL-WR720N-v4. 2015-06-18 20:24:26 +00:00
.gitattributes
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
LICENSE
Makefile Makefile: move the cleaning of staging_dir/target* from dirclean to clean 2015-06-14 17:47:16 +00:00
README Add 'subversion' build dependency to README 2014-08-31 12:06:32 +00:00
feeds.conf.default feeds.conf.default: use the for-15.05 branches, drop targets feed 2015-06-14 18:35:59 +00:00
rules.mk build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org