wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Florian Fainelli b644199999 Merged enhancements submitted by Stereo, thanks, closes #188 and #189 git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@2863 3c298f89-4303-0410-b956-a3cf2f4a3e73		2006-01-08 18:10:40 +00:00
docs	fix documentation, fixes #176	2006-01-08 02:17:18 +00:00
package	Merged enhancements submitted by Stereo, thanks, closes #188 and #189	2006-01-08 18:10:40 +00:00
scripts	add toshiba tftp commands	2005-12-25 01:04:46 +00:00
target	upgrade kernel to 2.6.15 final	2006-01-08 15:47:43 +00:00
toolchain	the gcc patch. you need to do make distclean and rebuild the toolchain	2006-01-04 08:39:20 +00:00
.cvsignore	add staging_dir_* to .cvsignore	2005-03-26 01:13:09 +00:00
Config.in	mipseb -> mips, thx kaloz for clearification	2005-12-26 12:02:43 +00:00
Config.in.devel	mipseb -> mips, thx kaloz for clearification	2005-12-26 12:02:43 +00:00
LICENSE	rename GPL to LICENSE	2005-08-13 12:29:03 +00:00
Makefile	cosmetic fix	2005-10-22 19:13:35 +00:00
README	pkg-config is needed for some packages	2005-09-11 18:05:09 +00:00
rules.mk	set V=5 as default and fix toolchain verbosity setting	2005-11-13 01:04:50 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The buildroot system is documented in docs/buildroot-documentation.html.

Building your own firmware you need to have access to a Linux system.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org