wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Waldemar Brodkorb b4312b447c try to add with correct permissions git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@698 3c298f89-4303-0410-b956-a3cf2f4a3e73		2005-04-21 08:33:23 +00:00
docs	minor change	2005-04-15 05:28:16 +00:00
package	fix typo	2005-04-21 07:04:42 +00:00
scripts	try to add with correct permissions	2005-04-21 08:33:23 +00:00
target	add lzma to compile chain	2005-04-21 06:14:52 +00:00
toolchain	upgrade kernel, quagga and openvpn, add licensing info to diag module, fix up jffs2	2005-04-14 08:39:01 +00:00
.cvsignore	add staging_dir_* to .cvsignore	2005-03-26 01:13:09 +00:00
Config.in	hide experimental/developer options from the user. can be reenabled by using make menuconfig DEVELOPER=1	2005-04-05 18:21:58 +00:00
Config.in.devel	hide experimental/developer options from the user. can be reenabled by using make menuconfig DEVELOPER=1	2005-04-05 18:21:58 +00:00
Makefile	add openwrt image builder to sdk	2005-04-20 17:01:30 +00:00
README	add unzip	2005-04-20 19:37:32 +00:00
rules.mk	Add rscript invocation variables	2005-04-18 06:14:06 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The buildroot system is documented in docs/buildroot-documentation.html.

Building your own firmware you need to have access to a Linux system.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org