Luka Perkov b24acf0794 kirkwood: update support for iconnect ... Previous patch was pushed due to false user report. While at it fix alphabetic ordering. The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot environment if OpenWrt's uboot package is used. In order to flash the image run following commands in uboot shell: nand erase 0x200000 0x1fe00000 ubi part root ; ubi remove rootfs ; ubi create rootfs tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset Signed-off-by: Luka Perkov <luka@openwrt.org> CC: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39591 3c298f89-4303-0410-b956-a3cf2f4a3e73		2014-02-15 23:53:08 +00:00
..
imagebuilder	build: consistently use 'depends on' instead of 'depends'	2013-04-17 15:36:41 +00:00
linux	kirkwood: update support for iconnect	2014-02-15 23:53:08 +00:00
sdk	build: consistently use 'depends on' instead of 'depends'	2013-04-17 15:36:41 +00:00
toolchain	build: consistently use 'depends on' instead of 'depends'	2013-04-17 15:36:41 +00:00
Config.in	add a feature flag for device tree support	2013-11-22 12:01:01 +00:00
Makefile	target: do not make target/*/install depend on target/*/compile - removes one redundant kernel build dir call on target/install	2012-06-06 17:24:05 +00:00