OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Imre Kaloz b0f15545ca use ext4 for ext2/3 on 2.6.32+
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 12:11:50 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include [include] package-ipkg.mk: add support for "essential" package flag, fix typo 2010-11-11 16:18:01 +00:00
package use ext4 for ext2/3 on 2.6.32+ 2010-11-22 12:11:50 +00:00
scripts deptest: Capitalize failure message. Makes it easier to spot in the logs. 2010-11-04 11:30:10 +00:00
target use ext4 for ext2/3 on 2.6.32+ 2010-11-22 12:11:50 +00:00
toolchain uClibc: 0.9.32 needs the ldso fix as well 2010-11-22 01:48:29 +00:00
tools [tools]: add e2fsprogs to tools and use that instead of libuuid 2010-11-22 11:26:45 +00:00
.gitignore .gitignore: Undo accidental commit. 2010-05-10 17:59:05 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in make the display support feature flag selectable 2010-11-02 16:26:57 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
feeds.conf.default [feeds] switch to LuCI trunk, should be stable enough for common use now 2010-11-16 00:05:41 +00:00
rules.mk remove an obsolete comment for the flock template 2010-10-31 15:36:47 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org