wifipineapple-openwrt/package/mac80211/patches/007-remove_unused_stuff.patch

258 lines
5.6 KiB
Diff

--- a/config.mk
+++ b/config.mk
@@ -107,10 +107,10 @@ CONFIG_MAC80211_MESH=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211=m
+# CONFIG_LIB80211_CRYPT_WEP=m
+# CONFIG_LIB80211_CRYPT_CCMP=m
+# CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG=y
CONFIG_WIRELESS_OLD_REGULATORY=n
@@ -127,56 +127,56 @@ CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG=y
-CONFIG_IWLWIFI=m
-CONFIG_IWLWIFI_LEDS=y
+# CONFIG_IWLWIFI=m
+# CONFIG_IWLWIFI_LEDS=y
# CONFIG_IWLWIFI_RFKILL=y
-CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
+# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
# CONFIG_IWLWIFI_DEBUG=y
# CONFIG_IWLWIFI_DEBUGFS=y
-CONFIG_IWLAGN=m
-CONFIG_IWL4965=y
-CONFIG_IWL5000=y
-CONFIG_IWL3945=m
-CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
+# CONFIG_IWLAGN=m
+# CONFIG_IWL4965=y
+# CONFIG_IWL5000=y
+# CONFIG_IWL3945=m
+# CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
-CONFIG_B43=m
-CONFIG_B43_HWRNG=y
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-CONFIG_B43_PCMCIA=y
-CONFIG_B43_PIO=y
-CONFIG_B43_LEDS=y
+# CONFIG_B43=m
+# CONFIG_B43_HWRNG=y
+# CONFIG_B43_PCI_AUTOSELECT=y
+# CONFIG_B43_PCICORE_AUTOSELECT=y
+# CONFIG_B43_PCMCIA=y
+# CONFIG_B43_PIO=y
+# CONFIG_B43_LEDS=y
# CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG=y
# CONFIG_B43_FORCE_PIO=y
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_HWRNG=y
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
+# CONFIG_B43LEGACY=m
+# CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+# CONFIG_B43LEGACY_LEDS=y
# CONFIG_B43LEGACY_RFKILL=y
# CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE=y
+# CONFIG_B43LEGACY_PIO=y
+# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+CONFIG_B43LEGACY_DMA_MODE=y
# CONFIG_B43LEGACY_PIO_MODE=y
# The Intel ipws
-CONFIG_LIBIPW=m
+# CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG=y
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100=m
+# CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG=y
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200=m
+# CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_RADIOTAP=y
+# CONFIG_IPW2200_PROMISCUOUS=y
+# CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG=y
# The above enables use a second interface prefixed 'rtap'.
# Example usage:
@@ -191,27 +191,27 @@ CONFIG_IPW2200_QOS=y
#
# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-CONFIG_SSB_PCMCIAHOST=y
+# CONFIG_SSB_BLOCKIO=y
+# CONFIG_SSB_PCIHOST_POSSIBLE=y
+# CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE=y
+# CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+# CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_DEBUG=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
+# CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+# CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_P54_PCI=m
-CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
+# CONFIG_B44=m
+# CONFIG_B44_PCI_AUTOSELECT=y
+# CONFIG_B44_PCICORE_AUTOSELECT=y
+# CONFIG_B44_PCI=y
CONFIG_RTL8180=m
-CONFIG_ADM8211=m
-CONFIG_PCMCIA_ATMEL=m
+# CONFIG_ADM8211=m
+# CONFIG_PCMCIA_ATMEL=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2400PCI=m
@@ -227,24 +227,24 @@ CONFIG_RT61PCI=m
NEED_RT2X00_FIRMWARE=y
endif
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
+# CONFIG_ATMEL=m
+# CONFIG_PCI_ATMEL=m
-CONFIG_MWL8K=m
+# CONFIG_MWL8K=m
endif
## end of PCI
ifneq ($(CONFIG_PCMCIA),)
-CONFIG_LIBERTAS_CS=m
-NEED_LIBERTAS=y
+# CONFIG_LIBERTAS_CS=m
+# NEED_LIBERTAS=y
endif
## end of PCMCIA
# This is required for some cards
-CONFIG_EEPROM_93CX6=m
+# CONFIG_EEPROM_93CX6=m
# USB Drivers
ifneq ($(CONFIG_USB),)
@@ -258,21 +258,21 @@ CONFIG_ZD1211RW=m
# is only wireless RNDIS chip known to date.
# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_RNDIS_HOST=m
+# CONFIG_USB_NET_RNDIS_WLAN=m
+# CONFIG_USB_NET_CDCETHER=m
CONFIG_P54_USB=m
CONFIG_RTL8187=m
-CONFIG_AT76C50X_USB=m
+# CONFIG_AT76C50X_USB=m
# Activate AR9170 support only on kernel >= 2.6.29.
# The needed USB poison feature was added in this kernel release.
ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 29 && echo yes),yes)
-CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y
+# CONFIG_AR9170_USB=m
+# CONFIG_AR9170_LEDS=y
endif
# RT2500USB does not require firmware
@@ -286,24 +286,24 @@ CONFIG_RT73USB=m
NEED_RT2X00_FIRMWARE=y
endif
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_LIBERTAS_USB=m
-NEED_LIBERTAS=y
+# CONFIG_LIBERTAS_THINFIRM_USB=m
+# CONFIG_LIBERTAS_USB=m
+# NEED_LIBERTAS=y
endif # end of USB driver list
ifneq ($(CONFIG_SPI_MASTER),)
-CONFIG_WL12XX=m
-CONFIG_LIBERTAS_SPI=m
-NEED_LIBERTAS=y
+# CONFIG_WL12XX=m
+# CONFIG_LIBERTAS_SPI=m
+# NEED_LIBERTAS=y
endif # end of SPI driver list
ifneq ($(CONFIG_MMC),)
-CONFIG_LIBERTAS_SDIO=m
-NEED_LIBERTAS=y
+# CONFIG_LIBERTAS_SDIO=m
+# NEED_LIBERTAS=y
endif # end of SDIO driver list
@@ -333,13 +333,13 @@ CONFIG_ATH_COMMON=m
# Sonics Silicon Backplane
-CONFIG_SSB_POSSIBLE=y
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
+# CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB=m
+# CONFIG_SSB_SPROM=y
# CONFIG_SSB_DEBUG=y
ifeq ($(NEED_LIBERTAS),y)
-CONFIG_LIBERTAS_THINFIRM=m
+# CONFIG_LIBERTAS_THINFIRM=m
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_DEBUG=y
endif