wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

John Crispin a5ef2aabf4 ramips: improve ralink ethernet driver Change list: * add tx scatter gather function. * add software rx vlan offload to let GRO work. * add jumbo frame support. because use build_skb so max MTU is 3812. * enable hardware tx vlan. * enable GRO and remove LRO. because it can improve performance and can work on forwarding. * enable/fix tx padding function. * let napi handle tx clean up. * support ethtool operation. now support message level, hardware status and coalesce. * ethtool support use mdio to get phy status only on mt7620. need modify dts file and add phy info to support it. Notes: * build and test on rt2880, rt3052, rt3352, rt3662, rt5350 and mt7620a. * TCP NAT performance improve. test with netperf. - rt2880(gigabit) from 5x to 12x Mbps. - rt3x5x from 6x to 94 Mbps. - rt5250 from 5x to 8x Mbps. - rt3662(gigabit) from 6x to 42x Mbps with GRO. 23x Mbps without GRO. 66x Mbps with jumbo frame. - mt7620 still 94Mbps. * TSO function not tested. because i don't have mt7620 with eco >= 5. and the hardware don't support to set MSS. it will have problem. Signed-off-by: michael lee <igvtee@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43108 3c298f89-4303-0410-b956-a3cf2f4a3e73		2014-10-29 19:43:59 +00:00
config	config: use PARTUUID by default on x86_64	2014-10-27 14:35:39 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	kernel: make it possible to select experimental 3.18 (3.18-rc2)	2014-10-27 18:16:45 +00:00
package	Add support for DHT11 driver	2014-10-29 15:02:38 +00:00
scripts	generate list of license information for packages	2014-10-26 16:57:33 +00:00
target	ramips: improve ralink ethernet driver	2014-10-29 19:43:59 +00:00
toolchain	toolchain: fix mips64 musl linker names	2014-10-24 00:15:58 +00:00
tools	ramips: add support for A5-V11 board (resubmit)	2014-10-29 11:01:17 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
LICENSE	rename GPL to LICENSE	2005-08-13 12:29:03 +00:00
Makefile	Revert "build: use ONESHELL to speed up scanning and the toplevel makefile"	2014-10-22 10:47:26 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
feeds.conf.default	feeds: switch LuCI to Github repo	2014-10-09 21:27:26 +00:00
rules.mk	rules.mk: reduce shexport to one line to allow it to be put in a target context	2014-10-22 08:57:20 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org