Gabor Juhos 041a6265f8 ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 ... The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case. The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or switch ports 2-4. The stock firmware uses a single LED (in the 5GHz position) to indicate the status of both radios, and a single LED (in the switch port 1 position) to indicate the status of all LAN ports. The "missing" LEDs are present on the board, and easily shine through the case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs. I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume that this is sufficient to build a fully-functional image. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73		2011-12-13 14:59:40 +00:00
..
preinit	ar71xx: change user-space board detection	2011-12-05 12:56:20 +00:00
upgrade	ar71xx: verify hardware id of firmware images on TP-Link boards	2011-12-05 18:11:51 +00:00
ar71xx.sh	ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2	2011-12-13 14:59:40 +00:00