wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Felix Fietkau a41a81e016 make table of contents clickable git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5067 3c298f89-4303-0410-b956-a3cf2f4a3e73		2006-10-13 23:45:30 +00:00
docs	make table of contents clickable	2006-10-13 23:45:30 +00:00
include	add prereq check for wget	2006-10-13 23:36:43 +00:00
package	move brcm-2.4 specific kmod to new module layout	2006-10-13 10:02:12 +00:00
scripts	improve ncurses check	2006-10-13 23:19:00 +00:00
target	move brcm-2.4 specific kmod to new module layout	2006-10-13 10:02:12 +00:00
toolchain	add uclibc portability patch (by thorsten glaser)	2006-10-10 20:03:03 +00:00
tools	always build sed, some systems have a broken one where it's hard to detect	2006-10-10 22:29:46 +00:00
BSDmakefile	add BSDmakefile as a wrapper which calls gmake	2006-10-10 18:51:05 +00:00
Config.in	add grub based images for x86-2.6 - still a bit hackish, but works with ext2 and jffs2	2006-10-08 15:48:56 +00:00
LICENSE	rename GPL to LICENSE	2005-08-13 12:29:03 +00:00
Makefile	set shell to bash in master makefile	2006-10-10 18:39:58 +00:00
README	pkg-config is needed for some packages	2005-09-11 18:05:09 +00:00
rules.mk	more fixes	2006-10-10 23:04:46 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The buildroot system is documented in docs/buildroot-documentation.html.

Building your own firmware you need to have access to a Linux system.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org