wifipineapple-openwrt/tools
John Crispin 77a28db429 [ramips] Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 14:19:33 +00:00
..
autoconf [tools] autoconf: another relocatability fix for autom4te, substitute hardcoded prefix with $STAGING_DIR when reading autom4te.cfg 2012-01-28 04:42:15 +00:00
automake [tools] fixes python related autokrampf install bug 2012-06-07 14:57:08 +00:00
b43-tools b43-tools: fix compile error: undefined reference to `yydebug' 2013-02-28 10:43:02 +00:00
bison [tools] bison: upgrade to version 2.7 2013-02-28 00:52:34 +00:00
ccache [tools] ccache: upgrade to version 3.1.9 2013-02-27 23:08:02 +00:00
cloog [tools] cloog: update to 0.15.11 2012-04-02 16:25:20 +00:00
cmake [tools] cmake: upgrade to version 2.8.10.2 2013-02-28 00:52:33 +00:00
dosfstools [tools] use HOST_STATIC_LINKING instead of hardcoding -static 2012-08-12 12:34:30 +00:00
e2fsprogs build: BSD compile fixes 2013-03-07 17:32:29 +00:00
firmware-utils [ramips] Add Netgear WNCE2001 (OF version) 2013-04-09 14:19:33 +00:00
flex [tools] flex: upgrade to version 2.5.37 2013-02-28 00:52:31 +00:00
flock [tools] use HOST_STATIC_LINKING instead of hardcoding -static 2012-08-12 12:34:30 +00:00
genext2fs [tools] use HOST_STATIC_LINKING instead of hardcoding -static 2012-08-12 12:34:30 +00:00
gmp [tools] gmp: upgrade to version 5.1.1 2013-02-28 00:52:30 +00:00
include build: BSD compile fixes 2013-03-07 17:32:29 +00:00
ipkg-utils tools/ipkg-utils: remove some unnecessary field checks 2012-12-22 19:56:17 +00:00
libelf build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems 2012-09-23 09:50:01 +00:00
libtool tools/libtool: enable parallel builds 2012-09-15 14:17:34 +00:00
lzma [tools] convert remaining tools to $(HOST_STATIC_LINKING) (#12012) 2012-08-12 13:27:49 +00:00
lzma-old tools/lzma-old fix compile issues (patch from #10253) 2011-10-21 12:52:49 +00:00
m4 tools/m4: bypass a time consuming configure test 2012-09-15 14:17:28 +00:00
missing-macros missing-macros: add GTKDOC_REBASE macro needed by some newer packages 2011-04-12 20:19:52 +00:00
mkimage mkimage: unbreak build on non-linux systems 2013-03-09 19:00:39 +00:00
mklibs [tools] mklibs: upgrade to 0.1.35 2013-02-26 21:49:11 +00:00
mm-macros [tools] mm-macros: update to 0.9.5 2012-04-02 16:25:38 +00:00
mpc tools/mpc: enable parallel builds 2012-09-15 14:17:55 +00:00
mpfr [tools] mpfr: upgrade to 3.1.1 2013-02-28 00:52:36 +00:00
mtd-utils [tools] use HOST_STATIC_LINKING instead of hardcoding -static 2012-08-12 12:34:30 +00:00
mtools [tools] use HOST_STATIC_LINKING instead of hardcoding -static 2012-08-12 12:34:30 +00:00
padjffs2 [tools] convert remaining tools to $(HOST_STATIC_LINKING) (#12012) 2012-08-12 13:27:49 +00:00
patch build: BSD compile fixes 2013-03-07 17:32:29 +00:00
patch-image [tools] rename patch-cmdline and add code for patching DTB files into kernel images 2012-11-02 20:06:45 +00:00
pkg-config tools/pkg-config: enable parallel builds 2012-09-15 14:17:37 +00:00
ppl tools/ppl: fix automake error due to use of obsolete directory name 2012-08-12 12:46:47 +00:00
qemu [tools] use HOST_STATIC_LINKING instead of hardcoding -static 2012-08-12 12:34:30 +00:00
quilt build: BSD compile fixes 2013-03-07 17:32:29 +00:00
scons [tools] scons: probe "python" and "python2" first in pywrap.sh in order to use the users preferred version if possible 2012-05-15 20:29:32 +00:00
sdcc [tools] use HOST_STATIC_LINKING instead of hardcoding -static 2012-08-12 12:34:30 +00:00
sed [tools] sed: upgrade to version 4.2.2 2013-02-28 00:52:28 +00:00
squashfs [tools] use HOST_STATIC_LINKING instead of hardcoding -static 2012-08-12 12:34:30 +00:00
squashfs4 build: BSD compile fixes 2013-03-07 17:32:29 +00:00
sstrip tools/sstrip: remove redundant -I flag that breaks build on some x86_64 linux hosts 2012-12-02 16:17:33 +00:00
upslug2 [tools] use HOST_STATIC_LINKING instead of hardcoding -static 2012-08-12 12:34:30 +00:00
upx tools/upx: use HOSTCXX to fix build errors on mac os x 2013-03-22 12:52:21 +00:00
wrt350nv2-builder [tools] wrt350nv2-builder: don't use internal zlib macro OF() in ioapi.h, it breaks with new zlib releases 2012-08-14 10:33:43 +00:00
xfce-macros tools: use host build_dir instead of target build_dir 2011-11-23 04:06:57 +00:00
xorg-macros tools: use host build_dir instead of target build_dir 2011-11-23 04:06:57 +00:00
xz build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems 2012-09-23 09:50:01 +00:00
yaffs2 build: BSD compile fixes 2013-03-07 17:32:29 +00:00
Makefile build: BSD compile fixes 2013-03-07 17:32:29 +00:00