wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Gabor Juhos a1ee34ca6e ar71xx: fix micrel phy patch (Patch from #8041.) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24718 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-12-19 10:05:55 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	[include] autotools.mk: like libintl, make all libtool fixup packages depend on the libiconv stub	2010-12-19 04:41:18 +00:00
package	[package] opkg: remove stray HOST_BUILD_DEPENDS	2010-12-18 19:16:03 +00:00
scripts	[scripts] download.pl: pass --no-check-certificate to wget	2010-12-18 20:54:53 +00:00
target	ar71xx: fix micrel phy patch (Patch from #8041.)	2010-12-19 10:05:55 +00:00
toolchain	[toolchain/gcc]: upgrade the linaro gcc to the 2010.12 release	2010-12-14 09:50:59 +00:00
tools	tools: fix dependencies	2010-12-19 00:05:17 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile	…
Config.in	remove 2.6.25 support	2010-11-22 13:43:32 +00:00
LICENSE	…
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	[feeds] switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	[include]	2010-12-13 19:04:33 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org