wifipineapple-openwrt/target/linux/ramips/dts/UR-326N4G.dts

113 lines
1.7 KiB
Plaintext

/dts-v1/;
/include/ "rt3050.dtsi"
/ {
compatible = "UR-326N4G", "ralink,rt3052-soc";
model = "UR-326N4G Wireless N router";
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
ralink,gpiomux = "mdio";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x2f>;
};
gpio-leds {
compatible = "gpio-leds";
3g {
label = "ur326:green:3g";
gpios = <&gpio0 9 1>;
};
gateway {
label = "ur326:green:gateway";
gpios = <&gpio0 11 1>;
};
ap {
label = "ur326:green:ap";
gpios = <&gpio0 12 1>;
};
wps {
label = "ur326:green:wps";
gpios = <&gpio0 14 1>;
};
station {
label = "ur326:green:station";
gpios = <&gpio0 13 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset_wps {
label = "reset_wps";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
mode {
label = "mode";
gpios = <&gpio0 7 1>;
linux,code = <0x32>;
};
};
wmac@10180000 {
status = "okay";
};
otg@101c0000 {
status = "okay";
};
};