wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Florian Fainelli 9feda69af9 Added mrd6 package : IPv6 multicast routing daemon git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@2816 3c298f89-4303-0410-b956-a3cf2f4a3e73		2006-01-03 12:53:01 +00:00
docs	document package makefile format changes	2005-10-22 11:07:28 +00:00
package	Added mrd6 package : IPv6 multicast routing daemon	2006-01-03 12:53:01 +00:00
scripts	add toshiba tftp commands	2005-12-25 01:04:46 +00:00
target	first load network driver (10), then wlan driver (20) and then wlcompat, so the order of eth0/eth1 is as used to	2006-01-03 00:40:02 +00:00
toolchain	Corrected ticket #162	2005-12-28 15:33:56 +00:00
.cvsignore	add staging_dir_* to .cvsignore	2005-03-26 01:13:09 +00:00
Config.in	mipseb -> mips, thx kaloz for clearification	2005-12-26 12:02:43 +00:00
Config.in.devel	mipseb -> mips, thx kaloz for clearification	2005-12-26 12:02:43 +00:00
LICENSE	rename GPL to LICENSE	2005-08-13 12:29:03 +00:00
Makefile	cosmetic fix	2005-10-22 19:13:35 +00:00
README	pkg-config is needed for some packages	2005-09-11 18:05:09 +00:00
rules.mk	set V=5 as default and fix toolchain verbosity setting	2005-11-13 01:04:50 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The buildroot system is documented in docs/buildroot-documentation.html.

Building your own firmware you need to have access to a Linux system.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org