wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Felix Fietkau 9cc7c86126 replace the hostapd preselection with a wpad preselection to enable proper client mode support in the default images git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19293 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-01-23 17:21:18 +00:00
docs	…
include	fix rootfs preparation with rootfs containing files with whitespaces in the filename (based on patch from #6551 )	2010-01-22 23:10:57 +00:00
package	remove obsolete dependencies and checks	2010-01-23 17:07:59 +00:00
scripts	metadata: allow build variants to contain "-"	2010-01-23 08:28:15 +00:00
target	replace the hostapd preselection with a wpad preselection to enable proper client mode support in the default images	2010-01-23 17:21:18 +00:00
toolchain	[toolchain] fix uclibc for mips by adding missing upstream hunks	2010-01-22 10:55:03 +00:00
tools	mtd-utils: refresh the cygwin_fixes patch	2010-01-16 00:11:47 +00:00
.gitignore	.gitignore: ignore vim swap files	2009-12-16 13:39:52 +00:00
BSDmakefile	…
Config.in	add a config item to specify arguments to strip	2010-01-22 08:12:20 +00:00
LICENSE	…
Makefile	…
README	…
feeds.conf.default	[packages] add a src-link example to feeds.conf.default	2009-12-13 20:46:30 +00:00
rules.mk	add a config item to specify arguments to strip	2010-01-22 08:12:20 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org