wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Hauke Mehrtens 9bc98e4fd9 b43-tools: update to version 017, which contains the patch. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34574 3c298f89-4303-0410-b956-a3cf2f4a3e73		2012-12-07 18:30:19 +00:00
docs	[docs] update switch documentation	2012-10-12 12:13:56 +00:00
include	Revert "include/image.mk: call Image/Build/{cpiogz,targz}"	2012-12-04 22:59:05 +00:00
package	mac80211: do not build mwifiex driver	2012-12-07 18:10:14 +00:00
scripts	[toolchain] remove support for ubicom32	2012-11-30 10:53:55 +00:00
target	[adm8668] create Linksys WRTU54G-TM profile	2012-12-07 18:02:31 +00:00
toolchain	toolchain: use file_copy to install the initial gcc files	2012-12-02 12:20:47 +00:00
tools	b43-tools: update to version 017, which contains the patch.	2012-12-07 18:30:19 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	…
Config.in	Change default TARGET_ROOTFS_RESERVED_PCT to zero to avoid wasted space	2012-12-02 13:04:01 +00:00
LICENSE	…
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
rules.mk	rules.mk: don't use $(realpath) in file_copy, the destination directory might not exist yet - spotted while doing a fresh build	2012-12-02 15:15:07 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org