139 lines
3.5 KiB
C
139 lines
3.5 KiB
C
/*
|
|
* TP-LINK TL-WR1041 v2 board support
|
|
*
|
|
* Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (C) 2011-2012 Anan Huang <axishero@foxmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-spi.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define TL_WR1041NV2_GPIO_BTN_RESET 14
|
|
#define TL_WR1041NV2_GPIO_LED_WPS 13
|
|
#define TL_WR1041NV2_GPIO_LED_WLAN 11
|
|
|
|
#define TL_WR1041NV2_GPIO_LED_SYSTEM 12
|
|
|
|
#define TL_WR1041NV2_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1041NV2_KEYS_POLL_INTERVAL)
|
|
|
|
#define TL_WR1041NV2_PCIE_CALDATA_OFFSET 0x5000
|
|
|
|
static const char *tl_wr1041nv2_part_probes[] = {
|
|
"tp-link",
|
|
NULL,
|
|
};
|
|
|
|
static struct flash_platform_data tl_wr1041nv2_flash_data = {
|
|
.part_probes = tl_wr1041nv2_part_probes,
|
|
};
|
|
|
|
static struct gpio_led tl_wr1041nv2_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "tp-link:green:system",
|
|
.gpio = TL_WR1041NV2_GPIO_LED_SYSTEM,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "tp-link:green:wps",
|
|
.gpio = TL_WR1041NV2_GPIO_LED_WPS,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "tp-link:green:wlan",
|
|
.gpio = TL_WR1041NV2_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button tl_wr1041nv2_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = TL_WR1041NV2_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_RGMII,
|
|
.txclk_delay_en = true,
|
|
.rxclk_delay_en = true,
|
|
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
|
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
};
|
|
|
|
static struct ar8327_platform_data db120_ar8327_data = {
|
|
.pad0_cfg = &db120_ar8327_pad0_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
}
|
|
};
|
|
|
|
static struct mdio_board_info db120_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &db120_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static void __init tl_wr1041nv2_setup(void)
|
|
{
|
|
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
|
|
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
|
|
|
ath79_register_m25p80(&tl_wr1041nv2_flash_data);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1041nv2_leds_gpio),
|
|
tl_wr1041nv2_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, TL_WR1041NV2_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(tl_wr1041nv2_gpio_keys),
|
|
tl_wr1041nv2_gpio_keys);
|
|
ath79_register_wmac(ee, mac);
|
|
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
|
AR934X_ETH_CFG_SW_ONLY_MODE);
|
|
|
|
ath79_register_mdio(1, 0x0);
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
|
|
|
|
mdiobus_register_board_info(db120_mdio0_info,
|
|
ARRAY_SIZE(db120_mdio0_info));
|
|
|
|
/* GMAC0 is connected to an AR8327 switch */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_pll_data.pll_1000 = 0x06000000;
|
|
ath79_register_eth(0);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_TL_WR1041N_V2, "TL-WR1041N-v2",
|
|
"TP-LINK TL-WR1041N v2", tl_wr1041nv2_setup);
|