wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Gabor Juhos 91714565c1 ramips: handle OTG interrupt on the RT305x SoC git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-12-14 08:00:25 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	add plemininary ultrasparc support	2010-12-14 07:57:22 +00:00
package	[package] opkg: remove manual automake invocations and rely and host and target fixups	2010-12-13 20:54:01 +00:00
scripts	deptest: Also accept stamps that are broken links.	2010-12-08 16:08:14 +00:00
target	ramips: handle OTG interrupt on the RT305x SoC	2010-12-14 08:00:25 +00:00
toolchain	add plemininary ultrasparc support	2010-12-14 07:57:22 +00:00
tools	[tools] mpfr: disable host fixup for now	2010-12-13 23:07:30 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	remove 2.6.25 support	2010-11-22 13:43:32 +00:00
LICENSE	rename GPL to LICENSE	2005-08-13 12:29:03 +00:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	[feeds] switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	[include]	2010-12-13 19:04:33 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org