wifipineapple-openwrt/target/linux/lantiq/dts/VGV7519.dtsi

312 lines
6.6 KiB
Plaintext

/include/ "vr9.dtsi"
/ {
model = "VGV7519 - KPN Experiabox V8";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xEEFFFFF>;
reg = <0x10000000 0xEF00000>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "lantiq,localbus", "simple-bus";
};
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-xr9";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
interrupt-parent = <&icu0>;
interrupts = <166 135 66 40 41 42 38>;
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
state_default: pinmux {
exin3 {
lantiq,groups = "exin3";
lantiq,function = "exin";
};
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
};
spi {
lantiq,groups = "spi", "spi_cs4";
lantiq,function = "spi";
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io4", "io5", "io6", /* stp */
"io21",
"io33",
"io7", "io44"; /* Internal ethernet phy leds */
lantiq,open-drain;
lantiq,pull = <0>;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
conf_in {
lantiq,pins = "io39"; /* exin3 */
lantiq,pull = <2>;
};
};
};
eth@E108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-net";
reg = < 0xE108000 0x3000 /* switch */
0xE10B100 0x70 /* mdio */
0xE10B1D8 0x30 /* mii */
0xE10B308 0x30 /* pmac */
>;
interrupt-parent = <&icu0>;
interrupts = <73 72>;
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
};
wan: interface@1 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
mac-address = [ 00 11 22 33 44 56 ];
lantiq,wan;
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,c45-reg-init = <1 0 0 0>;
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,c45-reg-init = <1 0 0 0>;
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,c45-reg-init = <1 0 0 0>;
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,c45-reg-init = <1 0 0 0>;
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,c45-reg-init = <1 0 0 0>;
};
};
};
stp: stp@E100BB0 {
compatible = "lantiq,gpio-stp-xway";
reg = <0xE100BB0 0x40>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0xffff>;
lantiq,groups = <0x3>;
lantiq,dsl = <0x0>;
lantiq,phy1 = <0x0>;
lantiq,phy2 = <0x0>;
/* lantiq,rising; */
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 32 0>;
lantiq,portmask = <0x3>;
};
pci@E105400 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "lantiq,pci-xway1";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
reg = <0x7000000 0x8000 /* config space */
0xE105400 0x400>; /* pci bridge */
lantiq,bus-clock = <33333333>;
/*lantiq,external-clock;*/
lantiq,delay-hi = <0>; /* 0ns delay */
lantiq,delay-lo = <0>; /* 0.0ns delay */
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
>;
gpios-reset = <&gpio 21 0>;
req-mask = <0x1>; /* GNT1 */
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy11g_a1x.bin";
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 9 1>;
linux,code = <0x198>;
};
eco {
label = "eco";
gpios = <&gpio 41 1>;
linux,code = <247>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 45 1>;
linux,code = <0xf7>;
};
wps {
label = "wps";
gpios = <&gpio 10 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
eco { /* blue */
label = "eco";
gpios = <&stp 2 1>;
};
wps_red { /* red */
label = "wps_red";
gpios = <&stp 3 1>;
};
wps_yellow { /* yellow */
label = "wps_yellow";
gpios = <&stp 4 1>;
};
upgrade { /* blue */
label = "upgrade";
gpios = <&stp 5 1>;
};
tv { /* yellow */
label = "tv";
gpios = <&stp 6 1>;
};
internet_yellow { /* yellow */
label = "internet_yellow";
gpios = <&stp 7 1>;
};
internet_red { /* red */
label = "internet_red";
gpios = <&stp 8 1>;
};
broadband_red { /* red */
label = "broadband_red";
gpios = <&stp 9 1>;
};
broadband_yellow { /* yellow */
label = "broadband_yellow";
gpios = <&stp 10 1>;
};
voice { /* yellow */
label = "voice";
gpios = <&stp 11 1>;
};
wireless_red { /* red */
label = "wireless_red";
gpios = <&stp 12 1>;
};
wireless_yellow { /* yellow */
label = "wireless_yellow";
gpios = <&stp 13 1>;
};
power2 { /* yellow */
label = "power2";
gpios = <&stp 14 1>;
};
power { /* red */
label = "power";
gpios = <&stp 15 1>;
default-state = "on";
};
};
};