wifipineapple-openwrt/target/linux/coldfire/patches/061-m5445x_rename_config.patch

792 lines
24 KiB
Diff

From 778c1668df4a4c634fae8ef99a05120121cce838 Mon Sep 17 00:00:00 2001
From: Kurt Mahan <kmahan@freescale.com>
Date: Wed, 18 Jun 2008 15:17:31 -0600
Subject: [PATCH] Convert CONFIG_M54455 to CONFIG_M5445X for clarity.
LTIBName: m5445x-rename-config
Signed-off-by: Kurt Mahan <kmahan@freescale.com>
---
arch/m68k/Kconfig | 50 ++++++++++++++++++++++++++++---------
arch/m68k/Makefile | 2 +-
arch/m68k/coldfire/Makefile | 2 +-
arch/m68k/coldfire/config.c | 33 +++++++++++++++----------
arch/m68k/coldfire/head.S | 23 ++++++++++-------
arch/m68k/coldfire/ints.c | 6 ++--
arch/m68k/kernel/dma.c | 4 +-
arch/m68k/kernel/setup.c | 2 +-
arch/m68k/mm/kmap.c | 2 +-
drivers/crypto/Kconfig | 12 ++++----
drivers/crypto/mcfcau-aes.c | 2 +-
drivers/crypto/mcfcau-des.c | 2 +-
drivers/crypto/mcfcau-md5.c | 2 +-
drivers/crypto/mcfcau-sha1.c | 2 +-
drivers/crypto/mcfcau.c | 2 +-
drivers/crypto/mcfcau.h | 2 +-
drivers/net/Kconfig | 2 +-
drivers/net/fec.c | 10 ++++----
drivers/net/fec.h | 2 +-
drivers/serial/mcfserial.c | 8 +++---
drivers/spi/coldfire_edma.c | 4 +-
drivers/spi/spi_coldfire.c | 2 +-
drivers/spi/ssi_audio.c | 2 +-
include/asm-m68k/cfcache.h | 2 +-
include/asm-m68k/coldfire.h | 4 +-
include/asm-m68k/coldfire_edma.h | 4 +-
include/asm-m68k/mcfsim.h | 2 +-
include/asm-m68k/mcfuart.h | 2 +-
include/asm-m68k/page_offset.h | 2 +-
include/asm-m68k/setup.h | 2 +-
30 files changed, 116 insertions(+), 80 deletions(-)
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -56,7 +56,7 @@ config ARCH_MAY_HAVE_PC_FDC
default y
config NO_IOPORT
- def_bool !(M54455 || M547X_8X)
+ def_bool !(M5445X || M547X_8X)
config NO_DMA
def_bool SUN3
@@ -143,7 +143,7 @@ config CFV4E
config MCD_DMA
bool "ColdFire MCD DMA support"
- depends on CFV4E
+ depends on M547X_8X
default y
help
This enables support for the ColdFire 547x/548x family
@@ -177,7 +177,7 @@ config HADES
config PCI
bool
depends on HADES || M54455
- default y
+ default n
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
@@ -325,11 +325,34 @@ config M68060
If you anticipate running this kernel on a computer with a MC68060
processor, say Y. Otherwise, say N.
-config M54455
- bool "MCF54455 support"
+config M5445X
+ bool "MCF5445x support"
depends on COLDFIRE
help
- This option will add support for the MCF54455 processor with mmu.
+ This option will add support for the MCF5445 processor with mmu.
+
+config M54451
+ bool
+ depends on M5445X
+ default n
+
+config M54455
+ bool
+ depends on M5445X
+ default n
+
+choice
+ prompt "Model"
+ depends on M5445X
+ default M54451EVB
+ config M54451EVB
+ bool "M54451EVB"
+ select M54451
+ config M54455EVB
+ bool "M54455EVB"
+ select M54455
+endchoice
+
config M547X_8X
bool "MCF547x/MCF548x support"
@@ -393,7 +416,8 @@ endchoice
config MCFCLK
int
- default 266666666 if M54455
+ default 266666666 if M54455EVB
+ default 240000000 if M54451EVB
default 266000000 if M547X
default 200000000 if M548X
help
@@ -401,7 +425,7 @@ config MCFCLK
config MCF_USER_HALT
bool "Coldfire User Halt Enable"
- depends on M54455 || M547X_8X
+ depends on M5445X || M547X_8X
default n
help
Enables the HALT instruction in User Mode.
@@ -420,19 +444,21 @@ config MMU_CFV4E
config SDRAM_BASE
hex
depends on COLDFIRE
- default 0x40000000 if M54455
+ default 0x40000000 if M5445X
default 0x00000000 if M547X_8X
config SDRAM_SIZE
hex
depends on COLDFIRE
- default 0x0FFFFFFF if M54455
+ default 0x08000000 if M54451EVB
+ default 0x10000000 if M54455EVB
default 0x04000000 if M547X_8X
config NOR_FLASH_BASE
hex "NOR Flash Base Address"
- depends on M54455
- default 0x00000000
+ depends on COLDFIRE
+ default 0x00000000 if M54451EVB
+ default 0x00000000 if M54455EVB
config M68KFPU_EMU
bool "Math emulation support (EXPERIMENTAL)"
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -59,7 +59,7 @@ endif
endif
endif
-ifdef CONFIG_M54455
+ifdef CONFIG_M5445X
KBUILD_CFLAGS += -march=isac -mcpu=54455 -msoft-float -g
KBUILD_AFLAGS += -march=isac -mcpu=54455 -msoft-float
endif
--- a/arch/m68k/coldfire/Makefile
+++ b/arch/m68k/coldfire/Makefile
@@ -9,7 +9,7 @@ ifneq ($(strip $(CONFIG_USB) $(CONFIG_US
endif
obj-$(CONFIG_PCI) += pci.o mcf5445x-pci.o iomap.o
-obj-$(CONFIG_M54455) += mcf5445x-devices.o
+obj-$(CONFIG_M5445X) += mcf5445x-devices.o
obj-$(CONFIG_M547X_8X) += m547x_8x-devices.o
obj-$(CONFIG_M547X_8X) += mcf548x-devices.o
obj-$(CONFIG_MCD_DMA) += m547x_8x-dma.o
--- a/arch/m68k/coldfire/config.c
+++ b/arch/m68k/coldfire/config.c
@@ -35,14 +35,14 @@
#include <asm/mcfsim.h>
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
#define UBOOT_EXTRA_CLOCKS
#elif defined(CONFIG_M547X_8X)
#define UBOOT_PCI
#endif
#include <asm/bootinfo.h>
-#ifdef CONFIG_M54455
+#ifdef CONFIG_M5445X
#include <asm/mcf5445x_intc.h>
#include <asm/mcf5445x_sdramc.h>
#include <asm/mcf5445x_fbcs.h>
@@ -132,8 +132,9 @@ int __init uboot_commandline(char *boota
/*
* This routine does things not done in the bootloader.
*/
-#if defined(CONFIG_M54455)
-#define DEFAULT_COMMAND_LINE "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
+#if defined(CONFIG_M5445X)
+#define FOO_DEFAULT_COMMAND_LINE "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)"
+#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/redstripe/rootfs/ ip=172.27.155.51:172.27.155.1"
#elif defined(CONFIG_M547X_8X)
#define DEFAULT_COMMAND_LINE "debug root=/dev/nfs rw nfsroot=172.27.155.1:/tftpboot/rigo/rootfs/ ip=172.27.155.85:172.27.155.1"
#endif
@@ -143,14 +144,14 @@ asmlinkage void __init cf_early_init(voi
extern char _end;
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
SET_VBR((void *)MCF_RAMBAR1);
#elif defined(CONFIG_M547X_8X)
SET_VBR((void *)MCF_RAMBAR0);
#endif
/* Mask all interrupts */
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
MCF_INTC0_IMRL = 0xFFFFFFFF;
MCF_INTC0_IMRH = 0xFFFFFFFF;
MCF_INTC1_IMRL = 0xFFFFFFFF;
@@ -160,7 +161,7 @@ asmlinkage void __init cf_early_init(voi
MCF_IMRH = 0xFFFFFFFF;
#endif
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
#if defined(CONFIG_NOR_FLASH_BASE)
MCF_FBCS_CSAR(1) = CONFIG_NOR_FLASH_BASE;
#else
@@ -171,9 +172,9 @@ asmlinkage void __init cf_early_init(voi
/* Init optional SDRAM chip select */
MCF_SDRAMC_SDCS(1) = (256*1024*1024) | 0x1B;
#endif
-#endif /* CONFIG_M54455 */
+#endif /* CONFIG_M5445X */
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
/* Setup SDRAM crossbar(XBS) priorities */
MCF_XBS_PRS2 = (MCF_XBS_PRS_M0(MCF_XBS_PRI_2) |
MCF_XBS_PRS_M1(MCF_XBS_PRI_3) |
@@ -193,6 +194,7 @@ asmlinkage void __init cf_early_init(voi
m68k_memory[m68k_num_memory].addr = CONFIG_SDRAM_BASE;
m68k_memory[m68k_num_memory++].size = CONFIG_SDRAM_SIZE;
+#if 0
if (!uboot_commandline(m68k_command_line)) {
#if defined(CONFIG_BOOTPARAM)
strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE-1);
@@ -200,6 +202,10 @@ asmlinkage void __init cf_early_init(voi
strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
#endif
}
+#endif
+/* JKM -- temporary! */
+strcpy(m68k_command_line, DEFAULT_COMMAND_LINE);
+/* JKM -- temporary! */
#if defined(CONFIG_BLK_DEV_INITRD)
/* add initrd image */
@@ -223,9 +229,10 @@ asmlinkage void __init cf_early_init(voi
/* Turn on caches via CACR, enable EUSP */
cacr_set(CACHE_INITIAL_MODE);
+
}
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
void settimericr(unsigned int timer, unsigned int level)
{
volatile unsigned char *icrp;
@@ -256,7 +263,7 @@ void __init coldfire_trap_init(void)
int i = 0;
e_vector *vectors;
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
vectors = (e_vector *)MCF_RAMBAR1;
#elif defined(CONFIG_M547X_8X)
vectors = (e_vector *)MCF_RAMBAR0;
@@ -281,7 +288,7 @@ void __init coldfire_trap_init(void)
vectors[32] = system_call;
}
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
void coldfire_tick(void)
{
@@ -369,7 +376,7 @@ unsigned long coldfire_gettimeoffset(voi
void coldfire_reboot(void)
{
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
/* disable interrupts and do a software reset */
asm("movew #0x2700, %%sr\n\t"
"moveb #0x80, %%d0\n\t"
--- a/arch/m68k/coldfire/head.S
+++ b/arch/m68k/coldfire/head.S
@@ -63,8 +63,8 @@
* None currently (mapped via TLBs)
*/
-#if CONFIG_SDRAM_BASE != PAGE_BASE
-#if defined(CONFIG_M54455)
+#if CONFIG_SDRAM_BASE != PAGE_OFFSET
+#if defined(CONFIG_M5445X)
#if 0
#define ACR0_DEFAULT #0xA00FA048 /* ACR0 default value */
#endif
@@ -85,7 +85,11 @@
#endif
#else
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
+#define ACR0_DEFAULT #0xF00FC040 /* ACR0 default value */
+#define ACR1_DEFAULT #0x400FA008 /* ACR1 default value */
+#define ACR2_DEFAULT #0x00000000 /* ACR2 default value */
+#define ACR3_DEFAULT #0x400FA008 /* ACR3 default value */
#elif defined(CONFIG_M547X_8X)
#define ACR0_DEFAULT #0xF00FC040 /* ACR0 default value */
#define ACR1_DEFAULT #0x000FA008 /* ACR1 default value */
@@ -280,7 +284,7 @@ ENTRY(__start)
subl %a0,%a0
movel %a0,%usp
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
movel #(MCF_RAMBAR1 + 0x221), %d0
movec %d0, %rambar1
#elif defined(CONFIG_M547X_8X)
@@ -331,12 +335,11 @@ _loop_bss:
cmpl %a0,%a1
bne _loop_bss
#endif
-
/* If you change the memory size to another value make a matching
change in paging_init(cf-mmu.c) to zones_size[]. */
#if CONFIG_SDRAM_BASE != PAGE_OFFSET
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
/* Map 256MB as code */
mmu_map (PAGE_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), \
MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_IC, MMUDR_SP, \
@@ -502,7 +505,7 @@ _loop_bss:
* enabled and we are executing in high memory.
*/
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
/* Map first 16 MB as code */
mmu_map (PHYS_OFFSET+0*0x1000000), (PHYS_OFFSET+0*0x1000000), \
MMUOR_ITLB, 0, MMUTR_SG, MMUDR_SZ16M, MMUDR_INC, MMUDR_SP, 0, \
@@ -562,7 +565,7 @@ ENTRY(__running_high)
/* Unmap unity mappings */
#if CONFIG_SDRAM_BASE != PAGE_OFFSET
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
mmu_unmap (PHYS_OFFSET+0*0x1000000), MMUOR_ITLB, %d0
mmu_unmap (PHYS_OFFSET+0*0x1000000), 0, %d0
#elif defined(CONFIG_M547X_8X)
@@ -599,9 +602,9 @@ func_start set_context,%d0,(1*4)
movec %d0,%asid
func_return set_context
-#ifdef CONFIG_M54455
+#ifdef CONFIG_M5445X
/*
- * set_fpga(addr,val) on the M54455EVB
+ * set_fpga(addr,val) on the M5445X
*
* Map in 0x00000000 -> 0x0fffffff and then do the write.
*/
--- a/arch/m68k/coldfire/ints.c
+++ b/arch/m68k/coldfire/ints.c
@@ -47,7 +47,7 @@ static int irq_depth[SYS_IRQS];
/*
* IRQ Controller
*/
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
void m5445x_irq_enable(unsigned int irq);
void m5445x_irq_disable(unsigned int irq);
static struct irq_controller m5445x_irq_controller = {
@@ -87,7 +87,7 @@ void __init init_IRQ(void)
{
int i;
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
for (i = 0; i < SYS_IRQS; i++)
irq_controller[i] = &m5445x_irq_controller;
#elif defined(CONFIG_M547X_8X)
@@ -337,7 +337,7 @@ asmlinkage void handle_badint(struct pt_
}
EXPORT_SYMBOL(handle_badint);
-#ifdef CONFIG_M54455
+#ifdef CONFIG_M5445X
/*
* M5445X Implementation
*/
--- a/arch/m68k/kernel/dma.c
+++ b/arch/m68k/kernel/dma.c
@@ -17,7 +17,7 @@
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t flag)
{
-#ifndef CONFIG_M54455
+#ifndef CONFIG_M5445X
struct page *page, **map;
pgprot_t pgprot;
void *addr;
@@ -75,7 +75,7 @@ void dma_free_coherent(struct device *de
void *addr, dma_addr_t handle)
{
pr_debug("dma_free_coherent: %p, %x\n", addr, handle);
-#ifndef CONFIG_M54455
+#ifndef CONFIG_M5445X
vfree(addr);
#else
kfree(addr);
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -519,7 +519,7 @@ int get_hardware_list(char *buffer)
void check_bugs(void)
{
-#if !defined(CONFIG_M68KFPU_EMU) && !defined(CONFIG_M54455)
+#if !defined(CONFIG_M68KFPU_EMU) && !defined(CONFIG_M5445X)
if (m68k_fputype == 0) {
printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
"WHICH IS REQUIRED BY LINUX/M68K ***\n");
--- a/arch/m68k/mm/kmap.c
+++ b/arch/m68k/mm/kmap.c
@@ -133,7 +133,7 @@ void __iomem *__ioremap(unsigned long ph
}
#endif
-#ifdef CONFIG_M54455
+#ifdef CONFIG_M5445X
if (physaddr >= 0xf0000000) {
/*
* On the M5445x processors an ACR is setup to map
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -62,15 +62,15 @@ config CRYPTO_DEV_GEODE
config CRYPTO_DEV_MCFCAU
bool "Support for Freescale Coldfire Cryptographic Acceleration Unit (CAU)"
- depends on M54455
+ depends on M5445X
select CRYPTO_ALGAPI
help
The cryptographic acceleration unit (CAU) is a ColdFire coprocessor
implementing a set of specialized operations in hardware. For example, you can
- find it on MCF54455.
+ find it on MCF5445X.
config CRYPTO_DEV_MCFCAU_DES
- tristate "DES and Triple DES cipher algorithms (MCF54455)"
+ tristate "DES and Triple DES cipher algorithms (MCF5445X)"
depends on CRYPTO_DEV_MCFCAU
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
@@ -84,7 +84,7 @@ config CRYPTO_DEV_MCFCAU_DES
will be called mcfcau-des.
config CRYPTO_DEV_MCFCAU_AES
- tristate "AES cipher algorithm (MCF54455)"
+ tristate "AES cipher algorithm (MCF5445X)"
depends on CRYPTO_DEV_MCFCAU
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
@@ -98,7 +98,7 @@ config CRYPTO_DEV_MCFCAU_AES
will be called mcfcau-aes.
config CRYPTO_DEV_MCFCAU_MD5
- tristate "MD5 digest algorithm (MCF54455)"
+ tristate "MD5 digest algorithm (MCF5445X)"
depends on CRYPTO_DEV_MCFCAU
select CRYPTO_ALGAPI
help
@@ -111,7 +111,7 @@ config CRYPTO_DEV_MCFCAU_MD5
will be called mcfcau-md5.
config CRYPTO_DEV_MCFCAU_SHA1
- tristate "SHA1 digest algorithm (MCF54455)"
+ tristate "SHA1 digest algorithm (MCF5445X)"
depends on CRYPTO_DEV_MCFCAU
select CRYPTO_ALGAPI
help
--- a/drivers/crypto/mcfcau-aes.c
+++ b/drivers/crypto/mcfcau-aes.c
@@ -5,7 +5,7 @@
* Author: Andrey Butok
* Copyright Freescale Semiconductor Inc. 2007
*
- * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
--- a/drivers/crypto/mcfcau-des.c
+++ b/drivers/crypto/mcfcau-des.c
@@ -5,7 +5,7 @@
* Author: Andrey Butok
* Copyright Freescale Semiconductor Inc. 2007
*
- * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
--- a/drivers/crypto/mcfcau-md5.c
+++ b/drivers/crypto/mcfcau-md5.c
@@ -5,7 +5,7 @@
* Author: Andrey Butok
* Copyright Freescale Semiconductor Inc. 2007
*
- * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
--- a/drivers/crypto/mcfcau-sha1.c
+++ b/drivers/crypto/mcfcau-sha1.c
@@ -5,7 +5,7 @@
* Author: Andrey Butok
* Copyright Freescale Semiconductor Inc. 2007
*
- * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
--- a/drivers/crypto/mcfcau.c
+++ b/drivers/crypto/mcfcau.c
@@ -5,7 +5,7 @@
* Author: Andrey Butok
* Copyright Freescale Semiconductor Inc. 2007
*
- * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
--- a/drivers/crypto/mcfcau.h
+++ b/drivers/crypto/mcfcau.h
@@ -5,7 +5,7 @@
* Author: Andrey Butok
* Copyright Freescale Semiconductor Inc. 2007
*
- * NOTE: You can find the ColdFire CAU module on MCF54455 and MCF52235.
+ * NOTE: You can find the ColdFire CAU module on MCF5445X and MCF52235.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1975,7 +1975,7 @@ config 68360_ENET
config FEC
bool "FEC ethernet controller (of ColdFire CPUs)"
- depends on M523x || M527x || M5272 || M528x || M520x || M54455
+ depends on M523x || M527x || M5272 || M528x || M520x || M5445X
help
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire processors.
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -52,7 +52,7 @@
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
- defined(CONFIG_M54455)
+ defined(CONFIG_M5445X)
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
@@ -84,7 +84,7 @@ static unsigned int fec_hw[] = {
(MCF_MBAR+0x30000),
#elif defined(CONFIG_M532x)
(MCF_MBAR+0xfc030000),
-#elif defined(CONFIG_M54455)
+#elif defined(CONFIG_M5445X)
(MCF_MBAR+0xfc030000),
#if defined(CONFIG_FEC2)
(MCF_MBAR+0xfc034000),
@@ -179,7 +179,7 @@ typedef struct {
* account when setting it.
*/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M54455)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X)
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
#else
#define OPT_FRAME_SIZE 0
@@ -1831,9 +1831,9 @@ static void __inline__ fec_uncache(unsig
/* ------------------------------------------------------------------------- */
-#elif defined(CONFIG_M54455)
+#elif defined(CONFIG_M5445X)
/*
- * Code specific for M54455
+ * Code specific for M5445X
*/
static void __inline__ fec_request_intrs(struct net_device *dev)
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -14,7 +14,7 @@
/****************************************************************************/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M54455)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X)
/*
* Just figures, Motorola would have to change the offsets for
* registers in the same peripheral device on different models
--- a/drivers/serial/mcfserial.c
+++ b/drivers/serial/mcfserial.c
@@ -69,7 +69,7 @@ struct timer_list mcfrs_timer_struct;
#define DEFAULT_CBAUD B38400
#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) || \
- defined(CONFIG_M54455) || defined(CONFIG_M547X_8X)
+ defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X)
#define CONSOLE_BAUD_RATE 115200
#define DEFAULT_CBAUD B115200
#elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
@@ -102,7 +102,7 @@ static struct tty_driver *mcfrs_serial_d
#undef SERIAL_DEBUG_FLOW
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M54455) || \
+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_M5445X) || \
defined(CONFIG_M547X_8X)
#define IRQBASE (MCFINT_VECBASE+MCFINT_UART0)
#else
@@ -1630,7 +1630,7 @@ static void mcfrs_irqinit(struct mcf_ser
/* GPIOs also must be initalized, depends on board */
break;
}
-#elif defined(CONFIG_M54455)
+#elif defined(CONFIG_M5445X)
volatile unsigned char *uartp;
uartp = info->addr;
switch (info->line) {
@@ -2022,7 +2022,7 @@ struct console mcfrs_console = {
static int __init mcfrs_console_init(void)
{
-#if !(defined(CONFIG_M54455) || defined(CONFIG_M547X_8X))
+#if !(defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X))
register_console(&mcfrs_console);
#endif
return 0;
--- a/drivers/spi/coldfire_edma.c
+++ b/drivers/spi/coldfire_edma.c
@@ -20,10 +20,10 @@
#include <linux/cdev.h>
#include <linux/seq_file.h>
#include <linux/proc_fs.h>
-#ifdef CONFIG_M54455
+#ifdef CONFIG_M5445X
#include <asm/mcf5445x_edma.h>
#include <asm/mcf5445x_intc.h>
-#endif /* CONFIG_M54455 */
+#endif /* CONFIG_M5445X */
#include <asm/coldfire_edma.h>
/*
--- a/drivers/spi/spi_coldfire.c
+++ b/drivers/spi/spi_coldfire.c
@@ -57,7 +57,7 @@
#include <asm/mcfqspi.h>
#include <asm/coldfire.h>
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
#include <asm/virtconvert.h>
#define SPI_DSPI
--- a/drivers/spi/ssi_audio.c
+++ b/drivers/spi/ssi_audio.c
@@ -25,7 +25,7 @@
#include <asm/coldfire.h>
#include <asm/coldfire_edma.h>
-#ifdef CONFIG_M54455
+#ifdef CONFIG_M5445X
#include <asm/mcf5445x_ssi.h>
#include <asm/mcf5445x_ccm.h>
#include <asm/mcf5445x_gpio.h>
--- a/include/asm-m68k/cfcache.h
+++ b/include/asm-m68k/cfcache.h
@@ -40,7 +40,7 @@
#define CF_CACR_IDSP (0x00000080) /* Ins default supervisor-protect */
#define CF_CACR_EUSP (0x00000020) /* Switch stacks in user mode */
-#ifdef CONFIG_M54455
+#ifdef CONFIG_M5445X
/*
* M5445x Cache Configuration
* - cache line size is 16 bytes
--- a/include/asm-m68k/coldfire.h
+++ b/include/asm-m68k/coldfire.h
@@ -1,9 +1,9 @@
#ifndef _COLDFIRE_H_
#define _COLDFIRE_H_
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
#define MCF_MBAR 0x0
-#define MCF_RAMBAR1 0x40000000
+#define MCF_RAMBAR1 0x80000000
#define MCF_SRAM 0x80000000
#elif defined(CONFIG_M547X_8X)
#define MCF_MBAR 0xF0000000
--- a/include/asm-m68k/coldfire_edma.h
+++ b/include/asm-m68k/coldfire_edma.h
@@ -20,14 +20,14 @@
#define EDMA_DRIVER_NAME "ColdFire-eDMA"
#define DMA_DEV_MINOR 1
-#ifdef CONFIG_M54455
+#ifdef CONFIG_M5445X
#define EDMA_INT_CHANNEL_BASE 8
#define EDMA_INT_CONTROLLER_BASE 64
#define EDMA_INT_BASE (EDMA_INT_CHANNEL_BASE + \
EDMA_INT_CONTROLLER_BASE)
#define EDMA_CHANNELS 16
#define EDMA_INT_ERR 16 /* edma error interrupt */
-#endif /* CONFIG_M54455 */
+#endif /* CONFIG_M5445X */
typedef irqreturn_t (*edma_irq_handler)(int, void *);
typedef void (*edma_error_handler)(int, void *);
--- a/include/asm-m68k/mcfsim.h
+++ b/include/asm-m68k/mcfsim.h
@@ -12,7 +12,7 @@
#include <asm/coldfire.h>
#endif
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
#include <asm/mcf5445x_intc.h>
#include <asm/mcf5445x_gpio.h>
#include <asm/mcf5445x_i2c.h>
--- a/include/asm-m68k/mcfuart.h
+++ b/include/asm-m68k/mcfuart.h
@@ -15,7 +15,7 @@
* Define the base address of the UARTS within the MBAR address
* space.
*/
-#if defined(CONFIG_M54455)
+#if defined(CONFIG_M5445X)
#include <asm/mcf5445x_intc.h>
#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
--- a/include/asm-m68k/page_offset.h
+++ b/include/asm-m68k/page_offset.h
@@ -4,7 +4,7 @@
#if defined(CONFIG_SUN3)
#define PAGE_OFFSET_RAW 0x0E000000
-#elif defined(CONFIG_M54455) || defined(CONFIG_M547X_8X)
+#elif defined(CONFIG_M5445X) || defined(CONFIG_M547X_8X)
#define PHYS_OFFSET CONFIG_SDRAM_BASE
#define PAGE_OFFSET_RAW (PHYS_OFFSET)
/* #define PAGE_OFFSET_RAW 0xC0000000 */
--- a/include/asm-m68k/setup.h
+++ b/include/asm-m68k/setup.h
@@ -240,7 +240,7 @@ extern unsigned long m68k_machtype;
#define FPU_68040 (1<<FPUB_68040)
#define FPU_68060 (1<<FPUB_68060)
#define FPU_SUNFPA (1<<FPUB_SUNFPA)
-#ifndef CONFIG_M54455
+#ifndef CONFIG_M5445X
#define FPU_CFV4E (1<<FPUB_CFV4E)
#else
#define FPU_CFV4E 0