172 lines
4.0 KiB
Diff
172 lines
4.0 KiB
Diff
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
@@ -22,8 +22,15 @@
|
|
linux,stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
+ aliases {
|
|
+ mdio-gpio0 = &mdio0;
|
|
+ };
|
|
+
|
|
soc {
|
|
pinmux@800000 {
|
|
+ pinctrl-0 = <&mdio0_pins &rgmii2_pins>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
i2c4_pins: i2c4_pinmux {
|
|
pins = "gpio12", "gpio13";
|
|
function = "gsbi4";
|
|
@@ -38,6 +45,25 @@
|
|
bias-none;
|
|
};
|
|
};
|
|
+
|
|
+ mdio0_pins: mdio0_pins {
|
|
+ mux {
|
|
+ pins = "gpio0", "gpio1";
|
|
+ function = "gpio";
|
|
+ drive-strength = <8>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ rgmii2_pins: rgmii2_pins {
|
|
+ mux {
|
|
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
|
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
|
+ function = "rgmii2";
|
|
+ drive-strength = <8>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
};
|
|
|
|
gsbi@16300000 {
|
|
@@ -76,6 +102,7 @@
|
|
#size-cells = <1>;
|
|
spi-max-frequency = <50000000>;
|
|
reg = <0>;
|
|
+ m25p,fast-read;
|
|
|
|
partition@0 {
|
|
label = "lowlevel_init";
|
|
@@ -136,5 +163,66 @@
|
|
usb30@1 {
|
|
status = "ok";
|
|
};
|
|
+
|
|
+ mdio0: mdio {
|
|
+ compatible = "virtual,mdio-gpio";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
|
|
+
|
|
+ phy0: ethernet-phy@0 {
|
|
+ device_type = "ethernet-phy";
|
|
+ reg = <0>;
|
|
+ qca,ar8327-initvals = <
|
|
+ 0x00004 0x7600000 /* PAD0_MODE */
|
|
+ 0x00008 0x1000000 /* PAD5_MODE */
|
|
+ 0x0000c 0x80 /* PAD6_MODE */
|
|
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
|
|
+ 0x000e0 0xc74164de /* SGMII_CTRL */
|
|
+ 0x0007c 0x4e /* PORT0_STATUS */
|
|
+ 0x00094 0x4e /* PORT6_STATUS */
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ phy4: ethernet-phy@4 {
|
|
+ device_type = "ethernet-phy";
|
|
+ reg = <4>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ nss-gmac-common {
|
|
+ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
|
|
+ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
|
|
+ };
|
|
+
|
|
+ gmac1: ethernet@37200000 {
|
|
+ status = "ok";
|
|
+ phy-mode = "rgmii";
|
|
+ qcom,id = <1>;
|
|
+ qcom,phy_mdio_addr = <4>;
|
|
+ qcom,poll_required = <1>;
|
|
+ qcom,rgmii_delay = <0>;
|
|
+ qcom,emulation = <0>;
|
|
+ qcom,forced_speed = <1000>;
|
|
+ qcom,forced_duplex = <1>;
|
|
+ qcom,socver = <0>;
|
|
+ local-mac-address = [000000000000];
|
|
+ mdiobus = <&mdio0>;
|
|
+ };
|
|
+
|
|
+ gmac2: ethernet@37400000 {
|
|
+ status = "ok";
|
|
+ phy-mode = "sgmii";
|
|
+ qcom,id = <2>;
|
|
+ qcom,phy_mdio_addr = <0>;
|
|
+ qcom,poll_required = <0>;
|
|
+ qcom,rgmii_delay = <0>;
|
|
+ qcom,emulation = <0>;
|
|
+ qcom,forced_speed = <1000>;
|
|
+ qcom,forced_duplex = <1>;
|
|
+ qcom,socver = <0>;
|
|
+ local-mac-address = [000000000000];
|
|
+ mdiobus = <&mdio0>;
|
|
+ };
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
@@ -3,6 +3,7 @@
|
|
#include "skeleton.dtsi"
|
|
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
|
|
#include <dt-bindings/soc/qcom,gsbi.h>
|
|
+#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
model = "Qualcomm IPQ8064";
|
|
@@ -390,5 +391,41 @@
|
|
};
|
|
};
|
|
|
|
+ nss-gmac-common {
|
|
+ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
|
|
+ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
|
|
+ };
|
|
+
|
|
+ gmac0: ethernet@37000000 {
|
|
+ device_type = "network";
|
|
+ compatible = "qcom,nss-gmac";
|
|
+ reg = <0x37000000 0x200000>;
|
|
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ gmac1: ethernet@37200000 {
|
|
+ device_type = "network";
|
|
+ compatible = "qcom,nss-gmac";
|
|
+ reg = <0x37200000 0x200000>;
|
|
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ gmac2: ethernet@37400000 {
|
|
+ device_type = "network";
|
|
+ compatible = "qcom,nss-gmac";
|
|
+ reg = <0x37400000 0x200000>;
|
|
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ gmac3: ethernet@37600000 {
|
|
+ device_type = "network";
|
|
+ compatible = "qcom,nss-gmac";
|
|
+ reg = <0x37600000 0x200000>;
|
|
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ status = "disabled";
|
|
+ };
|
|
};
|
|
};
|