OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Felix Fietkau 88cf8a1f8c madwifi: add a small missing change to the tx power rework
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-26 23:04:14 +00:00
docs [package] allow mac80211 devices to be configured to do 802.11s, requires iw 2009-02-26 14:53:03 +00:00
include ooops, m4 is already part of the host tools 2009-03-25 20:17:33 +00:00
package madwifi: add a small missing change to the tx power rework 2009-03-26 23:04:14 +00:00
scripts Add check for IXP42x A0 stepping. 2009-03-24 12:24:06 +00:00
target [kernel] add a workaround on kmod-textsearch modules (#4832) 2009-03-26 12:04:42 +00:00
toolchain fix uclibc subdir 2009-03-24 02:40:29 +00:00
tools pkg-config: disable potentially recursive compat lookups which break on systems with gnome devel tools installed (thx, lubek) 2009-03-24 22:27:22 +00:00
.gitignore add feeds.conf to .gitignore 2008-09-23 11:06:06 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in Add FEATURE ramdisk to be able to select the use of INITRAMFS for a sub-target 2009-03-18 15:57:18 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile avoid implicit rules in even more places 2009-03-03 14:16:48 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
feeds.conf.default Add desktop and xfce feed to feeds.conf.default 2009-01-19 19:46:03 +00:00
rules.mk move cflags default setting to target makefiles 2009-03-14 03:17:06 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org