wifipineapple-openwrt/target/linux/ramips
John Crispin 9f366431fc ramips: Add support for ZTE Q7
ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC.
I can,t find any information about this router on ZTE's website.
But I found this : http://en.cctairmobi.com/plus/list.php?tid=40
This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D

This patch adds support for it.
Because there is only one port,I disabled VLAN and use eth0 as lan port.
I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-(

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-04-01 08:31:46 +00:00
..
base-files ramips: Add support for ZTE Q7 2015-04-01 08:31:46 +00:00
dts ramips: Add support for ZTE Q7 2015-04-01 08:31:46 +00:00
files ramips: make ethernet register map u16 instead of u32 2015-03-22 15:11:14 +00:00
image ramips: Add support for ZTE Q7 2015-04-01 08:31:46 +00:00
mt7620 ralink: drop 3.14 support 2015-03-16 07:39:46 +00:00
mt7621 ralink: mt7621 add ECHI OCHI XCHI support 2015-03-26 10:59:51 +00:00
mt7628 ralink: drop 3.14 support 2015-03-16 07:39:46 +00:00
patches-3.18 ralink: mt7621 add ECHI OCHI XCHI support 2015-03-27 19:07:29 +00:00
rt288x ralink: drop 3.14 support 2015-03-16 07:39:46 +00:00
rt305x ralink: drop 3.14 support 2015-03-16 07:39:46 +00:00
rt3883 ralink: drop 3.14 support 2015-03-16 07:39:46 +00:00
Makefile ralink: bump to v3.18 2015-02-19 14:04:47 +00:00
base-files.mk
modules.mk ralink: MT7621 add i2c controller driver 2015-03-12 10:06:17 +00:00