| .. |
|
b53
|
kernel: b53: the b53 spi driver depends on spi
|
2013-01-27 21:39:53 +00:00 |
|
adm6996.c
|
[PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
|
2011-05-09 15:21:58 +00:00 |
|
adm6996.h
|
[PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
|
2011-05-09 15:21:58 +00:00 |
|
ar8216.c
|
generic: ar8216: add sgmii_delay_en field to ar8327_platform_data
|
2012-12-25 18:45:31 +00:00 |
|
ar8216.h
|
generic: ar8216: add sgmii_delay_en field to ar8327_platform_data
|
2012-12-25 18:45:31 +00:00 |
|
ip17xx.c
|
[generic] unify extended vlan id swconfig attributes.
|
2010-10-12 20:49:35 +00:00 |
|
micrel.c
|
ar71xx: move micrel PHY driver to the generic linux target
|
2012-03-15 09:25:53 +00:00 |
|
mvswitch.c
|
kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
|
2012-05-06 21:19:14 +00:00 |
|
mvswitch.h
|
rename target/linux/generic-2.6 to generic
|
2010-06-26 20:42:58 +00:00 |
|
psb6970.c
|
[generic] unify extended vlan id swconfig attributes.
|
2010-10-12 20:49:35 +00:00 |
|
rtl8306.c
|
rtl8306: do not overwrite registers in the phy fixup, it could mess up other switches (fixes #8911)
|
2011-04-02 16:35:22 +00:00 |
|
rtl8366_smi.c
|
generic: rtl8366_smi: only assign pvid if no pvid was set yet
|
2013-01-18 15:19:11 +00:00 |
|
rtl8366_smi.h
|
linux: generic: rtl836*: fix compilation with !CONFIG_OF
|
2012-12-15 13:32:02 +00:00 |
|
rtl8366rb.c
|
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
|
2013-01-27 17:48:48 +00:00 |
|
rtl8366s.c
|
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
|
2013-01-27 17:48:48 +00:00 |
|
rtl8367.c
|
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
|
2013-01-27 17:48:48 +00:00 |
|
rtl8367b.c
|
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
|
2013-01-27 17:48:48 +00:00 |
|
swconfig.c
|
swconfig: make it compatible with 3.7
|
2012-11-21 17:38:11 +00:00 |
|
swconfig_leds.c
|
generic: swconfig: use led_set_brightness in LED control code
|
2012-10-26 18:58:18 +00:00 |
2fe7bc5108