wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Florian Fainelli 816d178941 [malta] update to kernel 3.0 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27912 3c298f89-4303-0410-b956-a3cf2f4a3e73		2011-08-05 13:48:42 +00:00
docs	[docs]: kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	[include] autotools.mk: implement PKG_FIXUP:=patch-libtool	2011-08-01 00:22:53 +00:00
package	broadcom-diag: add support for bcma	2011-08-04 20:08:57 +00:00
scripts	allow targets to define a default subtarget when using automatic subtarget detection from r27407	2011-07-04 11:21:37 +00:00
target	[malta] update to kernel 3.0	2011-08-05 13:48:42 +00:00
toolchain	toolchain/uClibc: Make sure there's always a UCLIBC_VERSION_*	2011-08-02 23:32:44 +00:00
tools	tools/quilt: fix spurious calls to the configure and Makefile targets (#8462 )	2011-08-01 19:22:45 +00:00
.gitignore	[buildroot] add vim temp files (*~) to .gitignore	2011-04-29 15:11:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00
LICENSE	rename GPL to LICENSE	2005-08-13 12:29:03 +00:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	[feeds] switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	only export GCC_HONOUR_COPTS for the built-in toolchain, fixes missing-fhonour-copts warnings with external toolchains	2011-07-25 10:32:38 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org