hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
wifipineapple-openwrt/target/linux/brcm47xx/patches-3.0/0015-ssb-add-serial-flash-s...

698 lines
18 KiB
Diff
Raw Blame History

From 980da78179592a3f5f99168bc5af415835aa8c13 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 24 Jul 2011 20:20:36 +0200
Subject: [PATCH 15/26] ssb: add serial flash support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/ssb/Kconfig | 6 +
drivers/ssb/Makefile | 1 +
drivers/ssb/driver_chipcommon_sflash.c | 556 +++++++++++++++++++++++++++++
drivers/ssb/driver_mipscore.c | 6 +
drivers/ssb/ssb_private.h | 4 +
include/linux/ssb/ssb_driver_chipcommon.h | 30 ++-
6 files changed, 601 insertions(+), 2 deletions(-)
create mode 100644 drivers/ssb/driver_chipcommon_sflash.c
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -137,6 +137,12 @@ config SSB_DRIVER_MIPS
If unsure, say N
+config SSB_SFLASH
+ bool
+ depends on SSB_DRIVER_MIPS
+ default y
+
+
# Assumption: We are on embedded, if we compile the MIPS core.
config SSB_EMBEDDED
bool
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
# built-in drivers
ssb-y += driver_chipcommon.o
ssb-y += driver_chipcommon_pmu.o
+ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -0,0 +1,556 @@
+/*
+ * Broadcom SiliconBackplane chipcommon serial flash interface
+ *
+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
+ * Copyright 2010, Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/delay.h>
+
+#include "ssb_private.h"
+
+#define NUM_RETRIES 3
+
+
+/* Issue a serial flash command */
+static inline void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
+{
+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
+ SSB_CHIPCO_FLASHCTL_START | opcode);
+ while (chipco_read32(cc, SSB_CHIPCO_FLASHCTL)
+ & SSB_CHIPCO_FLASHCTL_BUSY)
+ ;
+}
+
+
+static inline void ssb_sflash_write_u8(struct ssb_chipcommon *cc,
+ u32 offset, u8 byte)
+{
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
+ chipco_write32(cc, SSB_CHIPCO_FLASHDATA, byte);
+}
+
+/* Initialize serial flash access */
+int ssb_sflash_init(struct ssb_chipcommon *cc)
+{
+ u32 id, id2;
+
+ memset(&cc->sflash, 0, sizeof(struct ssb_sflash));
+
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ /* Probe for ST chips */
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
+ cc->sflash.blocksize = 64 * 1024;
+ switch (id) {
+ case 0x11:
+ /* ST M25P20 2 Mbit Serial Flash */
+ cc->sflash.numblocks = 4;
+ break;
+ case 0x12:
+ /* ST M25P40 4 Mbit Serial Flash */
+ cc->sflash.numblocks = 8;
+ break;
+ case 0x13:
+ /* ST M25P80 8 Mbit Serial Flash */
+ cc->sflash.numblocks = 16;
+ break;
+ case 0x14:
+ /* ST M25P16 16 Mbit Serial Flash */
+ cc->sflash.numblocks = 32;
+ break;
+ case 0x15:
+ /* ST M25P32 32 Mbit Serial Flash */
+ cc->sflash.numblocks = 64;
+ break;
+ case 0x16:
+ /* ST M25P64 64 Mbit Serial Flash */
+ cc->sflash.numblocks = 128;
+ break;
+ case 0x17:
+ /* ST M25FL128 128 Mbit Serial Flash */
+ cc->sflash.numblocks = 256;
+ break;
+ case 0xbf:
+ /* All of the following flashes are SST with
+ * 4KB subsectors. Others should be added but
+ * We'll have to revamp the way we identify them
+ * since RES is not eough to disambiguate them.
+ */
+ cc->sflash.blocksize = 4 * 1024;
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
+ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
+ switch (id2) {
+ case 1:
+ /* SST25WF512 512 Kbit Serial Flash */
+ case 0x48:
+ /* SST25VF512 512 Kbit Serial Flash */
+ cc->sflash.numblocks = 16;
+ break;
+ case 2:
+ /* SST25WF010 1 Mbit Serial Flash */
+ case 0x49:
+ /* SST25VF010 1 Mbit Serial Flash */
+ cc->sflash.numblocks = 32;
+ break;
+ case 3:
+ /* SST25WF020 2 Mbit Serial Flash */
+ case 0x43:
+ /* SST25VF020 2 Mbit Serial Flash */
+ cc->sflash.numblocks = 64;
+ break;
+ case 4:
+ /* SST25WF040 4 Mbit Serial Flash */
+ case 0x44:
+ /* SST25VF040 4 Mbit Serial Flash */
+ case 0x8d:
+ /* SST25VF040B 4 Mbit Serial Flash */
+ cc->sflash.numblocks = 128;
+ break;
+ case 5:
+ /* SST25WF080 8 Mbit Serial Flash */
+ case 0x8e:
+ /* SST25VF080B 8 Mbit Serial Flash */
+ cc->sflash.numblocks = 256;
+ break;
+ case 0x41:
+ /* SST25VF016 16 Mbit Serial Flash */
+ cc->sflash.numblocks = 512;
+ break;
+ case 0x4a:
+ /* SST25VF032 32 Mbit Serial Flash */
+ cc->sflash.numblocks = 1024;
+ break;
+ case 0x4b:
+ /* SST25VF064 64 Mbit Serial Flash */
+ cc->sflash.numblocks = 2048;
+ break;
+ }
+ break;
+ }
+ break;
+
+ case SSB_CHIPCO_FLASHT_ATSER:
+ /* Probe for Atmel chips */
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
+ switch (id) {
+ case 0xc:
+ /* Atmel AT45DB011 1Mbit Serial Flash */
+ cc->sflash.blocksize = 256;
+ cc->sflash.numblocks = 512;
+ break;
+ case 0x14:
+ /* Atmel AT45DB021 2Mbit Serial Flash */
+ cc->sflash.blocksize = 256;
+ cc->sflash.numblocks = 1024;
+ break;
+ case 0x1c:
+ /* Atmel AT45DB041 4Mbit Serial Flash */
+ cc->sflash.blocksize = 256;
+ cc->sflash.numblocks = 2048;
+ break;
+ case 0x24:
+ /* Atmel AT45DB081 8Mbit Serial Flash */
+ cc->sflash.blocksize = 256;
+ cc->sflash.numblocks = 4096;
+ break;
+ case 0x2c:
+ /* Atmel AT45DB161 16Mbit Serial Flash */
+ cc->sflash.blocksize = 512;
+ cc->sflash.numblocks = 4096;
+ break;
+ case 0x34:
+ /* Atmel AT45DB321 32Mbit Serial Flash */
+ cc->sflash.blocksize = 512;
+ cc->sflash.numblocks = 8192;
+ break;
+ case 0x3c:
+ /* Atmel AT45DB642 64Mbit Serial Flash */
+ cc->sflash.blocksize = 1024;
+ cc->sflash.numblocks = 8192;
+ break;
+ }
+ break;
+ }
+
+ cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks;
+
+ return cc->sflash.size ? 0 : -ENODEV;
+}
+
+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
+int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len,
+ u8 *buf)
+{
+ u8 *from, *to;
+ u32 cnt, i;
+
+ if (!len)
+ return 0;
+
+ if ((offset + len) > cc->sflash.size)
+ return -EINVAL;
+
+ if ((len >= 4) && (offset & 3))
+ cnt = 4 - (offset & 3);
+ else if ((len >= 4) && ((u32)buf & 3))
+ cnt = 4 - ((u32)buf & 3);
+ else
+ cnt = len;
+
+
+ if (cc->dev->id.revision == 12)
+ from = (u8 *)KSEG1ADDR(SSB_FLASH2 + offset);
+ else
+ from = (u8 *)KSEG0ADDR(SSB_FLASH2 + offset);
+
+ to = (u8 *)buf;
+
+ if (cnt < 4) {
+ for (i = 0; i < cnt; i++) {
+ *to = readb(from);
+ from++;
+ to++;
+ }
+ return cnt;
+ }
+
+ while (cnt >= 4) {
+ *(u32 *)to = readl(from);
+ from += 4;
+ to += 4;
+ cnt -= 4;
+ }
+
+ return len - cnt;
+}
+
+/* Poll for command completion. Returns zero when complete. */
+int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset)
+{
+ if (offset >= cc->sflash.size)
+ return -22;
+
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ /* Check for ST Write In Progress bit */
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RDSR);
+ return chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
+ & SSB_CHIPCO_FLASHSTA_ST_WIP;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ /* Check for Atmel Ready bit */
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
+ return !(chipco_read32(cc, SSB_CHIPCO_FLASHDATA)
+ & SSB_CHIPCO_FLASHSTA_AT_READY);
+ }
+
+ return 0;
+}
+
+
+static int sflash_st_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
+ const u8 *buf)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+ int ret = 0;
+ bool is4712b0 = (bus->chip_id == 0x4712) && (bus->chip_rev == 3);
+ u32 mask;
+
+
+ /* Enable writes */
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
+ if (is4712b0) {
+ mask = 1 << 14;
+ ssb_sflash_write_u8(cc, offset, *buf++);
+ /* Set chip select */
+ chipco_set32(cc, SSB_CHIPCO_GPIOOUT, mask);
+ /* Issue a page program with the first byte */
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
+ ret = 1;
+ offset++;
+ len--;
+ while (len > 0) {
+ if ((offset & 255) == 0) {
+ /* Page boundary, drop cs and return */
+ chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
+ udelay(1);
+ if (!ssb_sflash_poll(cc, offset)) {
+ /* Flash rejected command */
+ return -EAGAIN;
+ }
+ return ret;
+ } else {
+ /* Write single byte */
+ ssb_sflash_cmd(cc, *buf++);
+ }
+ ret++;
+ offset++;
+ len--;
+ }
+ /* All done, drop cs */
+ chipco_mask32(cc, SSB_CHIPCO_GPIOOUT, ~mask);
+ udelay(1);
+ if (!ssb_sflash_poll(cc, offset)) {
+ /* Flash rejected command */
+ return -EAGAIN;
+ }
+ } else if (cc->dev->id.revision >= 20) {
+ ssb_sflash_write_u8(cc, offset, *buf++);
+ /* Issue a page program with CSA bit set */
+ ssb_sflash_cmd(cc,
+ SSB_CHIPCO_FLASHCTL_ST_CSA |
+ SSB_CHIPCO_FLASHCTL_ST_PP);
+ ret = 1;
+ offset++;
+ len--;
+ while (len > 0) {
+ if ((offset & 255) == 0) {
+ /* Page boundary, poll droping cs and return */
+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
+ udelay(1);
+ if (!ssb_sflash_poll(cc, offset)) {
+ /* Flash rejected command */
+ return -EAGAIN;
+ }
+ return ret;
+ } else {
+ /* Write single byte */
+ ssb_sflash_cmd(cc,
+ SSB_CHIPCO_FLASHCTL_ST_CSA |
+ *buf++);
+ }
+ ret++;
+ offset++;
+ len--;
+ }
+ /* All done, drop cs & poll */
+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, 0);
+ udelay(1);
+ if (!ssb_sflash_poll(cc, offset)) {
+ /* Flash rejected command */
+ return -EAGAIN;
+ }
+ } else {
+ ret = 1;
+ ssb_sflash_write_u8(cc, offset, *buf);
+ /* Page program */
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_PP);
+ }
+ return ret;
+}
+
+static int sflash_at_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
+ const u8 *buf)
+{
+ struct ssb_sflash *sfl = &cc->sflash;
+ u32 page, byte, mask;
+ int ret = 0;
+ mask = sfl->blocksize - 1;
+ page = (offset & ~mask) << 1;
+ byte = offset & mask;
+ /* Read main memory page into buffer 1 */
+ if (byte || (len < sfl->blocksize)) {
+ int i = 100;
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD);
+ /* 250 us for AT45DB321B */
+ while (i > 0 && ssb_sflash_poll(cc, offset)) {
+ udelay(10);
+ i--;
+ }
+ BUG_ON(!ssb_sflash_poll(cc, offset));
+ }
+ /* Write into buffer 1 */
+ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
+ ssb_sflash_write_u8(cc, byte++, *buf++);
+ ssb_sflash_cmd(cc,
+ SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE);
+ }
+ /* Write buffer 1 into main memory page */
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, page);
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM);
+
+ return ret;
+}
+
+/* Write len bytes starting at offset into buf. Returns number of bytes
+ * written. Caller should poll for completion.
+ */
+int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
+ const u8 *buf)
+{
+ struct ssb_sflash *sfl;
+ int ret = 0, tries = NUM_RETRIES;
+
+ if (!len)
+ return 0;
+
+ if ((offset + len) > cc->sflash.size)
+ return -EINVAL;
+
+ sfl = &cc->sflash;
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ do {
+ ret = sflash_st_write(cc, offset, len, buf);
+ tries--;
+ } while (ret == -EAGAIN && tries > 0);
+
+ if (ret == -EAGAIN && tries == 0) {
+ pr_info("ST Flash rejected write\n");
+ ret = -EIO;
+ }
+ break;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ ret = sflash_at_write(cc, offset, len, buf);
+ break;
+ }
+
+ return ret;
+}
+
+/* Erase a region. Returns number of bytes scheduled for erasure.
+ * Caller should poll for completion.
+ */
+int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset)
+{
+ struct ssb_sflash *sfl;
+
+ if (offset >= cc->sflash.size)
+ return -EINVAL;
+
+ sfl = &cc->sflash;
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_WREN);
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset);
+ /* Newer flashes have "sub-sectors" which can be erased independently
+ * with a new command: ST_SSE. The ST_SE command erases 64KB just as
+ * before.
+ */
+ ssb_sflash_cmd(cc, (sfl->blocksize < (64 * 1024)) ? SSB_CHIPCO_FLASHCTL_ST_SSE : SSB_CHIPCO_FLASHCTL_ST_SE);
+ return sfl->blocksize;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, offset << 1);
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE);
+ return sfl->blocksize;
+ }
+
+ return 0;
+}
+
+/*
+ * writes the appropriate range of flash, a NULL buf simply erases
+ * the region of flash
+ */
+int ssb_sflash_commit(struct ssb_chipcommon *cc, u32 offset, u32 len,
+ const u8 *buf)
+{
+ struct ssb_sflash *sfl;
+ u8 *block = NULL, *cur_ptr, *blk_ptr;
+ u32 blocksize = 0, mask, cur_offset, cur_length, cur_retlen, remainder;
+ u32 blk_offset, blk_len, copied;
+ int bytes, ret = 0;
+
+ /* Check address range */
+ if (len <= 0)
+ return 0;
+
+ sfl = &cc->sflash;
+ if ((offset + len) > sfl->size)
+ return -EINVAL;
+
+ blocksize = sfl->blocksize;
+ mask = blocksize - 1;
+
+ /* Allocate a block of mem */
+ block = kmalloc(blocksize, GFP_KERNEL);
+ if (!block)
+ return -ENOMEM;
+
+ while (len) {
+ /* Align offset */
+ cur_offset = offset & ~mask;
+ cur_length = blocksize;
+ cur_ptr = block;
+
+ remainder = blocksize - (offset & mask);
+ if (len < remainder)
+ cur_retlen = len;
+ else
+ cur_retlen = remainder;
+
+ /* buf == NULL means erase only */
+ if (buf) {
+ /* Copy existing data into holding block if necessary */
+ if ((offset & mask) || (len < blocksize)) {
+ blk_offset = cur_offset;
+ blk_len = cur_length;
+ blk_ptr = cur_ptr;
+
+ /* Copy entire block */
+ while (blk_len) {
+ copied = ssb_sflash_read(cc,
+ blk_offset,
+ blk_len, blk_ptr);
+ blk_offset += copied;
+ blk_len -= copied;
+ blk_ptr += copied;
+ }
+ }
+
+ /* Copy input data into holding block */
+ memcpy(cur_ptr + (offset & mask), buf, cur_retlen);
+ }
+
+ /* Erase block */
+ ret = ssb_sflash_erase(cc, cur_offset);
+ if (ret < 0)
+ goto done;
+
+ while (ssb_sflash_poll(cc, cur_offset));
+
+ /* buf == NULL means erase only */
+ if (!buf) {
+ offset += cur_retlen;
+ len -= cur_retlen;
+ continue;
+ }
+
+ /* Write holding block */
+ while (cur_length > 0) {
+ bytes = ssb_sflash_write(cc, cur_offset,
+ cur_length, cur_ptr);
+
+ if (bytes < 0) {
+ ret = bytes;
+ goto done;
+ }
+
+ while (ssb_sflash_poll(cc, cur_offset))
+ ;
+
+ cur_offset += bytes;
+ cur_length -= bytes;
+ cur_ptr += bytes;
+ }
+
+ offset += cur_retlen;
+ len -= cur_retlen;
+ buf += cur_retlen;
+ }
+
+ ret = len;
+done:
+ kfree(block);
+ return ret;
+}
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -203,7 +203,13 @@ static void ssb_mips_flash_detect(struct
switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
case SSB_CHIPCO_FLASHT_STSER:
case SSB_CHIPCO_FLASHT_ATSER:
+#ifdef CONFIG_SSB_SFLASH
+ pr_info("found serial flash.\n");
+ bus->chipco.flash_type = SSB_SFLASH;
+ ssb_sflash_init(&bus->chipco);
+#else
pr_info("serial flash not supported.\n");
+#endif /* CONFIG_SSB_SFLASH */
break;
case SSB_CHIPCO_FLASHT_PARA:
pr_info("found parallel flash.\n");
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -192,6 +192,10 @@ extern int ssb_devices_freeze(struct ssb
extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
+#ifdef CONFIG_SSB_SFLASH
+/* driver_chipcommon_sflash.c */
+int ssb_sflash_init(struct ssb_chipcommon *cc);
+#endif /* CONFIG_SSB_SFLASH */
/* b43_pci_bridge.c */
#ifdef CONFIG_SSB_B43_PCI_BRIDGE
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -503,8 +503,10 @@
#define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
-#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
-#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */
+#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00D9 /* Deep Power-down */
+#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */
+#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
+#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
/* Status register bits for ST flashes */
#define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */
@@ -585,6 +587,7 @@ struct ssb_chipcommon_pmu {
#ifdef CONFIG_SSB_DRIVER_MIPS
enum ssb_flash_type {
SSB_PFLASH,
+ SSB_SFLASH,
};
struct ssb_pflash {
@@ -592,6 +595,14 @@ struct ssb_pflash {
u32 window;
u32 window_size;
};
+
+#ifdef CONFIG_SSB_SFLASH
+struct ssb_sflash {
+ u32 blocksize; /* Block size */
+ u32 numblocks; /* Number of blocks */
+ u32 size; /* Total size in bytes */
+};
+#endif /* CONFIG_SSB_SFLASH */
#endif /* CONFIG_SSB_DRIVER_MIPS */
struct ssb_chipcommon {
@@ -605,6 +616,9 @@ struct ssb_chipcommon {
enum ssb_flash_type flash_type;
union {
struct ssb_pflash pflash;
+#ifdef CONFIG_SSB_SFLASH
+ struct ssb_sflash sflash;
+#endif /* CONFIG_SSB_SFLASH */
};
#endif /* CONFIG_SSB_DRIVER_MIPS */
};
@@ -666,6 +680,18 @@ extern int ssb_chipco_serial_init(struct
struct ssb_serial_port *ports);
#endif /* CONFIG_SSB_SERIAL */
+#ifdef CONFIG_SSB_SFLASH
+/* Chipcommon sflash support. */
+int ssb_sflash_read(struct ssb_chipcommon *cc, u32 offset, u32 len,
+ u8 *buf);
+int ssb_sflash_poll(struct ssb_chipcommon *cc, u32 offset);
+int ssb_sflash_write(struct ssb_chipcommon *cc, u32 offset, u32 len,
+ const u8 *buf);
+int ssb_sflash_erase(struct ssb_chipcommon *cc, u32 offset);
+int ssb_sflash_commit(struct ssb_chipcommon *cc, u32 offset, u32 len,
+ const u8 *buf);
+#endif /* CONFIG_SSB_SFLASH */
+
/* PMU support */
extern void ssb_pmu_init(struct ssb_chipcommon *cc);
Reference in New Issue View Git Blame Copy Permalink