wifipineapple-openwrt/target/linux/brcm47xx/patches-3.0/0012-bcma-move-parallel-fla...

143 lines
5.5 KiB
Diff

From b7d9f9cd6a8e463c1061ea29ed3e614403625024 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 17 Jul 2011 14:51:47 +0200
Subject: [PATCH 12/26] bcma: move parallel flash into a union
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/nvram.c | 3 +
drivers/bcma/driver_mips.c | 1 +
include/linux/bcma/bcma_driver_chipcommon.h | 73 ++++++++++++++++++++++++++-
3 files changed, 76 insertions(+), 1 deletions(-)
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -50,6 +50,9 @@ static void early_nvram_init(void)
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
+ if (bcma_cc->flash_type != BCMA_PFLASH)
+ return;
+
base = bcma_cc->pflash.window;
lim = bcma_cc->pflash.window_size;
break;
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -189,6 +189,7 @@ static void bcma_core_mips_flash_detect(
break;
case BCMA_CC_FLASHT_PARA:
pr_info("found parallel flash.\n");
+ bus->drv_cc.flash_type = BCMA_PFLASH;
bus->drv_cc.pflash.window = 0x1c000000;
bus->drv_cc.pflash.window_size = 0x02000000;
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -108,10 +108,68 @@
#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
#define BCMA_CC_FLASHCTL 0x0040
+
+/* Start/busy bit in flashcontrol */
+#define BCMA_CC_FLASHCTL_OPCODE 0x000000ff
+#define BCMA_CC_FLASHCTL_ACTION 0x00000700
+#define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */
#define BCMA_CC_FLASHCTL_START 0x80000000
#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
+
+/* flashcontrol action+opcodes for ST flashes */
+#define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */
+#define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */
+#define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */
+#define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */
+#define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */
+#define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */
+#define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */
+#define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */
+#define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */
+#define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */
+#define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
+#define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
+
+
+/* flashcontrol action+opcodes for Atmel flashes */
+#define BCMA_CC_FLASHCTL_AT_READ 0x07e8
+#define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2
+#define BCMA_CC_FLASHCTL_AT_BUF1_READ
+#define BCMA_CC_FLASHCTL_AT_BUF2_READ
+#define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7
+#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384
+#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387
+#define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283
+#define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286
+#define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288
+#define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289
+#define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281
+#define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250
+#define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
+#define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
+#define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253
+#define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255
+#define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260
+#define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261
+#define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258
+#define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259
+
#define BCMA_CC_FLASHADDR 0x0044
#define BCMA_CC_FLASHDATA 0x0048
+
+/* Status register bits for ST flashes */
+#define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */
+#define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */
+#define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */
+#define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2
+#define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */
+
+/* Status register bits for Atmel flashes */
+#define BCMA_CC_FLASHDATA_AT_READY 0x80
+#define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40
+#define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38
+#define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3
+
#define BCMA_CC_BCAST_ADDR 0x0050
#define BCMA_CC_BCAST_DATA 0x0054
#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
@@ -300,6 +358,12 @@
#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */
#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */
+#define BCMA_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
+#define BCMA_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
+#define BCMA_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */
+#define BCMA_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */
+
+
/* Data for the PMU, if available.
* Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
*/
@@ -309,6 +373,10 @@ struct bcma_chipcommon_pmu {
};
#ifdef CONFIG_BCMA_DRIVER_MIPS
+enum bcma_flash_type {
+ BCMA_PFLASH,
+};
+
struct bcma_pflash {
u8 buswidth;
u32 window;
@@ -334,7 +402,10 @@ struct bcma_drv_cc {
u16 fast_pwrup_delay;
struct bcma_chipcommon_pmu pmu;
#ifdef CONFIG_BCMA_DRIVER_MIPS
- struct bcma_pflash pflash;
+ enum bcma_flash_type flash_type;
+ union {
+ struct bcma_pflash pflash;
+ };
int nr_serial_ports;
struct bcma_serial_port serial_ports[4];