wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Vasilis Tsiligiannis 7f2b269416 [package] acx: Detect every device present git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26150 3c298f89-4303-0410-b956-a3cf2f4a3e73		2011-03-13 20:58:20 +00:00
docs	[docs]: kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	download.mk: properly quote download urls	2011-03-13 18:38:43 +00:00
package	[package] acx: Detect every device present	2011-03-13 20:58:20 +00:00
scripts	base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc	2011-03-01 05:40:38 +00:00
target	brcm47xx: add workaround for fuse again.	2011-03-13 19:25:24 +00:00
toolchain	[toolchain]: fixup armeb, too	2011-03-11 11:35:31 +00:00
tools	firmware-utils/mktplinkfw: add support for the TP-Link TL-WA901ND v2 board	2011-03-13 15:08:29 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	fix wrong copy&paste in the helptext for kernel AIO support	2011-02-27 20:06:05 +00:00
LICENSE	rename GPL to LICENSE	2005-08-13 12:29:03 +00:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	[feeds] switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	only support EABI on ARM targets	2011-03-07 12:59:19 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org