wifipineapple-openwrt/target/linux/ramips/patches-3.10/0011-MIPS-ralink-add-support-for-systick-timer-found-on-n.patch

From 3b511d972b556712f89ccc68825c0ec8f398dc5c Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 13:46:09 +0200
Subject: [PATCH 11/25] MIPS: ralink: add support for systick timer found on
 newer ralink SoC

Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent
of the SoC master clock. If we want to automatic frequency scaling to work we
need to use the systick timer as the clock source.

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/ralink/Kconfig       |    7 ++
 arch/mips/ralink/Makefile      |    2 +
 arch/mips/ralink/cevt-rt3352.c |  145 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 154 insertions(+)
 create mode 100644 arch/mips/ralink/cevt-rt3352.c

--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -1,5 +1,12 @@
 if RALINK
 
+config CLKEVT_RT3352
+	bool "Systick Clockevent source"
+	depends on SOC_RT305X || SOC_MT7620
+	default y
+	select CLKSRC_OF
+	select CLKSRC_MMIO
+
 choice
 	prompt "Ralink SoC selection"
 	default SOC_RT305X
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -8,6 +8,8 @@
 
 obj-y := prom.o of.o reset.o clk.o irq.o timer.o
 
+obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
+
 obj-$(CONFIG_SOC_RT288X) += rt288x.o
 obj-$(CONFIG_SOC_RT305X) += rt305x.o
 obj-$(CONFIG_SOC_RT3883) += rt3883.o
--- /dev/null
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -0,0 +1,145 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 by John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/reset.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define SYSTICK_FREQ		(50 * 1000)
+
+#define SYSTICK_CONFIG		0x00
+#define SYSTICK_COMPARE		0x04
+#define SYSTICK_COUNT		0x08
+
+/* route systick irq to mips irq 7 instead of the r4k-timer */
+#define CFG_EXT_STK_EN		0x2
+/* enable the counter */
+#define CFG_CNT_EN		0x1
+
+struct systick_device {
+	void __iomem *membase;
+	struct clock_event_device dev;
+	int irq_requested;
+	int freq_scale;
+};
+
+static void systick_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt);
+
+static int systick_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	struct systick_device *sdev;
+	u32 count;
+
+	sdev = container_of(evt, struct systick_device, dev);
+	count = ioread32(sdev->membase + SYSTICK_COUNT);
+	count = (count + delta) % SYSTICK_FREQ;
+	iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
+
+	return 0;
+}
+
+static void systick_event_handler(struct clock_event_device *dev)
+{
+	/* noting to do here */
+}
+
+static irqreturn_t systick_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *dev = (struct clock_event_device *) dev_id;
+
+	dev->event_handler(dev);
+
+	return IRQ_HANDLED;
+}
+
+static struct systick_device systick = {
+	.dev = {
+		/*
+		 * cevt-r4k uses 300, make sure systick
+		 * gets used if available
+		 */
+		.rating		= 310,
+		.features	= CLOCK_EVT_FEAT_ONESHOT,
+		.set_next_event	= systick_next_event,
+		.set_mode	= systick_set_clock_mode,
+		.event_handler	= systick_event_handler,
+	},
+};
+
+static struct irqaction systick_irqaction = {
+	.handler = systick_interrupt,
+	.flags = IRQF_PERCPU | IRQF_TIMER,
+	.dev_id = &systick.dev,
+};
+
+static void systick_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	struct systick_device *sdev;
+
+	sdev = container_of(evt, struct systick_device, dev);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		if (!sdev->irq_requested)
+			setup_irq(systick.dev.irq, &systick_irqaction);
+		sdev->irq_requested = 1;
+		iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
+				systick.membase + SYSTICK_CONFIG);
+		break;
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		if (sdev->irq_requested)
+			free_irq(systick.dev.irq, &systick_irqaction);
+		sdev->irq_requested = 0;
+		iowrite32(0, systick.membase + SYSTICK_CONFIG);
+		break;
+
+	default:
+		pr_err("%s: Unhandeled mips clock_mode\n", systick.dev.name);
+		break;
+	}
+}
+
+static void __init ralink_systick_init(struct device_node *np)
+{
+	systick.membase = of_iomap(np, 0);
+	if (!systick.membase)
+		return;
+
+	systick_irqaction.name = np->name;
+	systick.dev.name = np->name;
+	clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
+	systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
+	systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
+	systick.dev.irq = irq_of_parse_and_map(np, 0);
+	if (!systick.dev.irq) {
+		pr_err("%s: request_irq failed", np->name);
+		return;
+	}
+
+	clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
+			SYSTICK_FREQ, 301, 16, clocksource_mmio_readl_up);
+
+	clockevents_register_device(&systick.dev);
+
+	pr_info("%s: runing - mult: %d, shift: %d\n",
+			np->name, systick.dev.mult, systick.dev.shift);
+}
+
+CLOCKSOURCE_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);