41 lines
1.9 KiB
Diff
41 lines
1.9 KiB
Diff
From a35663826cfd0dea9a44d7b7a506ce9db9c703e3 Mon Sep 17 00:00:00 2001
|
|
From: Florian Meier <florian.meier@koalo.de>
|
|
Date: Fri, 22 Nov 2013 14:37:51 +0100
|
|
Subject: [PATCH 117/174] BCM2708: Extend mach header
|
|
|
|
Extend the headers of the mach-bcm2708
|
|
in order to support I2S and DMA engine.
|
|
|
|
Signed-off-by: Florian Meier <florian.meier@koalo.de>
|
|
---
|
|
arch/arm/mach-bcm2708/include/mach/dma.h | 2 ++
|
|
arch/arm/mach-bcm2708/include/mach/platform.h | 2 ++
|
|
2 files changed, 4 insertions(+)
|
|
|
|
--- a/arch/arm/mach-bcm2708/include/mach/dma.h
|
|
+++ b/arch/arm/mach-bcm2708/include/mach/dma.h
|
|
@@ -45,6 +45,8 @@
|
|
#define BCM2708_DMA_ADDR 0x04
|
|
/* the current control block appears in the following registers - read only */
|
|
#define BCM2708_DMA_INFO 0x08
|
|
+#define BCM2708_DMA_SOURCE_AD 0x0c
|
|
+#define BCM2708_DMA_DEST_AD 0x10
|
|
#define BCM2708_DMA_NEXTCB 0x1C
|
|
#define BCM2708_DMA_DEBUG 0x20
|
|
|
|
--- a/arch/arm/mach-bcm2708/include/mach/platform.h
|
|
+++ b/arch/arm/mach-bcm2708/include/mach/platform.h
|
|
@@ -62,10 +62,12 @@
|
|
#define DMA_BASE (BCM2708_PERI_BASE + 0x7000) /* DMA controller */
|
|
#define ARM_BASE (BCM2708_PERI_BASE + 0xB000) /* BCM2708 ARM control block */
|
|
#define PM_BASE (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */
|
|
+#define PCM_CLOCK_BASE (BCM2708_PERI_BASE + 0x101098) /* PCM Clock */
|
|
#define RNG_BASE (BCM2708_PERI_BASE + 0x104000) /* Hardware RNG */
|
|
#define GPIO_BASE (BCM2708_PERI_BASE + 0x200000) /* GPIO */
|
|
#define UART0_BASE (BCM2708_PERI_BASE + 0x201000) /* Uart 0 */
|
|
#define MMCI0_BASE (BCM2708_PERI_BASE + 0x202000) /* MMC interface */
|
|
+#define I2S_BASE (BCM2708_PERI_BASE + 0x203000) /* I2S */
|
|
#define SPI0_BASE (BCM2708_PERI_BASE + 0x204000) /* SPI0 */
|
|
#define BSC0_BASE (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
|
|
#define UART1_BASE (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */
|