OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Hauke Mehrtens 76de1e8509 kernel: activate input-matrixkmap for kernel 3.8
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27 21:23:33 +00:00
docs docs: update remaining references to functions.sh 2012-12-20 15:29:33 +00:00
include kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips 2013-01-26 16:26:13 +00:00
package kernel: activate input-matrixkmap for kernel 3.8 2013-01-27 21:23:33 +00:00
scripts [toolchain] remove support for ubicom32 2012-11-30 10:53:55 +00:00
target kernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8 2013-01-27 21:18:52 +00:00
toolchain [toolchain] gcc: fix build for MIPS64 targets introduced by musl patch 2013-01-07 18:16:40 +00:00
tools [tools/firmware-utils] adds support for Edimax BR-6524N 2013-01-06 11:11:30 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore
BSDmakefile
Config.in kernel: turn on kallsyms and debug info by default 2013-01-21 16:13:43 +00:00
LICENSE
Makefile build: it is no longer necessary to call make target/linux/clean as part of make clean 2012-12-02 15:26:28 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
feeds.conf.default
rules.mk rules.mk: only select latest libgcc.a with wildcard match (#12798) 2013-01-13 20:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org