wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Steven Barth 7426205f9e cyassl: shouldn't depend on zlib when compiled with --without-zlib git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20692 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-04-04 11:16:46 +00:00
docs	Add documentation for passphrase option.	2009-09-24 21:50:17 +00:00
include	[cosmectic] include/netfilter.mk: move ebtables definitions at the end	2010-04-04 03:43:13 +00:00
package	cyassl: shouldn't depend on zlib when compiled with --without-zlib	2010-04-04 11:16:46 +00:00
scripts	[rdc] rework board detection	2010-03-18 23:35:21 +00:00
target	ar71xx: fix broken LAN ports on the boards with AR8216 switch (closes #7024 )	2010-04-03 13:59:08 +00:00
toolchain	toolchain/binutils: building gas for arm-*-uclibc systems requires linking with -lm	2010-03-30 08:01:35 +00:00
tools	[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct	2010-04-01 21:20:43 +00:00
.gitignore	.gitignore: ignore vim swap files	2009-12-16 13:39:52 +00:00
BSDmakefile	…
Config.in	select LZMA compressed initramfs by default for ramips	2010-03-31 09:58:29 +00:00
LICENSE	…
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	[packages] add a src-link example to feeds.conf.default	2009-12-13 20:46:30 +00:00
rules.mk	fix path to libgcc.a in LIBGCC_S	2010-03-30 04:04:47 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org