wifipineapple-openwrt/target/linux/mvebu/patches-3.10/0107-mtd-nand-pxa3xx-Set-in...

47 lines
1.7 KiB
Diff

From c16f0b44984bc623621d26df22823b50f13f65d8 Mon Sep 17 00:00:00 2001
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Tue, 14 May 2013 08:15:21 -0300
Subject: [PATCH 107/203] mtd: nand: pxa3xx: Set info->use_dma properly
Currently, the variable info->use_dma is never set and always
zero-valued which means the driver never does DMA transfers.
We fix this by simply setting info->use_dma to the module parameter,
also named 'use_dma'. Note that the module parameter has the same name,
but different semantics.
This fixes a regression introduced by the below commit
which removed the info->use_dma variable set.
commit 4eb2da8994042d68e84e31138788429a102da2ea
Author: Lei Wen <leiwen@marvell.com>
Date: Mon Feb 28 10:32:13 2011 +0800
mtd: pxa3xx_nand: unify prepare command
Before the above commit, the driver had use_dma=1 on all NAND commands
except on CMD_STATUS. This behavior is long lost and we are not
recovering in this patch, either.
This was spotted and verified by human inspection.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Reviewed-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -506,6 +506,7 @@ static int prepare_command_pool(struct p
info->buf_count = 0;
info->oob_size = 0;
info->use_ecc = 0;
+ info->use_dma = (use_dma) ? 1 : 0;
info->is_ready = 0;
info->retcode = ERR_NONE;
if (info->cs != 0)