54 lines
1.7 KiB
Diff
54 lines
1.7 KiB
Diff
From: Felix Fietkau <nbd@openwrt.org>
|
|
Date: Wed, 14 Jan 2015 14:13:15 +0100
|
|
Subject: [PATCH] ath9k: fix race condition in irq processing during hardware
|
|
reset
|
|
|
|
To fix invalid hardware accesses, the commit
|
|
"ath9k: do not access hardware on IRQs during reset" made the irq
|
|
handler ignore interrupts emitted after queueing a hardware reset (which
|
|
disables the IRQ). This left a small time window for the IRQ to get
|
|
re-enabled by the tasklet, which caused IRQ storms.
|
|
Instead of returning IRQ_NONE when ATH_OP_HW_RESET is set, disable the
|
|
IRQ entirely for the duration of the reset.
|
|
|
|
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
|
|
---
|
|
|
|
--- a/drivers/net/wireless/ath/ath9k/main.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/main.c
|
|
@@ -285,6 +285,7 @@ static int ath_reset_internal(struct ath
|
|
|
|
__ath_cancel_work(sc);
|
|
|
|
+ disable_irq(sc->irq);
|
|
tasklet_disable(&sc->intr_tq);
|
|
tasklet_disable(&sc->bcon_tasklet);
|
|
spin_lock_bh(&sc->sc_pcu_lock);
|
|
@@ -331,6 +332,7 @@ static int ath_reset_internal(struct ath
|
|
r = -EIO;
|
|
|
|
out:
|
|
+ enable_irq(sc->irq);
|
|
spin_unlock_bh(&sc->sc_pcu_lock);
|
|
tasklet_enable(&sc->bcon_tasklet);
|
|
tasklet_enable(&sc->intr_tq);
|
|
@@ -512,9 +514,6 @@ irqreturn_t ath_isr(int irq, void *dev)
|
|
if (!ah || test_bit(ATH_OP_INVALID, &common->op_flags))
|
|
return IRQ_NONE;
|
|
|
|
- if (!AR_SREV_9100(ah) && test_bit(ATH_OP_HW_RESET, &common->op_flags))
|
|
- return IRQ_NONE;
|
|
-
|
|
/* shared irq, not for us */
|
|
if (!ath9k_hw_intrpend(ah))
|
|
return IRQ_NONE;
|
|
@@ -529,7 +528,7 @@ irqreturn_t ath_isr(int irq, void *dev)
|
|
ath9k_debug_sync_cause(sc, sync_cause);
|
|
status &= ah->imask; /* discard unasked-for bits */
|
|
|
|
- if (AR_SREV_9100(ah) && test_bit(ATH_OP_HW_RESET, &common->op_flags))
|
|
+ if (test_bit(ATH_OP_HW_RESET, &common->op_flags))
|
|
return IRQ_HANDLED;
|
|
|
|
/*
|