hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
wifipineapple-openwrt/target/linux/imx6/files-3.18/drivers/net/phy/gw16083.c

950 lines
25 KiB
C
Raw Blame History

/*
* drivers/net/phy/gw16083.c
*
* Driver for GW16083 Ventana Ethernet Expansion Mezzanine
*
* Author: Tim Harvey
*
* Copyright (c) 2014 Tim Harvey <tharvey@gateworks.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
/*
* The GW16083 interfaces with a Ventana baseboard via the PCIe bus, an i2c
* bus (i2c2), and a couple of GPIO's. On the PCIe bus is an i210 GigE with
* its MAC connected to Port4 of a Marvell MV88E6176 7-port GigE switch via
* MDIO and RGMII. Ports 0-3 are standard copper RJ45 but Ports 5 and 6
* connect to Marvell MV88E1111 dual-mode Copper/Fiber PHY's over SGMII and
* MDIO. The PHY's have both an RG45 for copper and an SFP module.
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/marvell_phy.h>
#include <linux/of_platform.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <linux/uaccess.h>
#include "gw16083.h"
#undef FAIL_ON_CHECKSUM_ERR /* fail to configure SFP if checksum bad */
#define PORT_POWER_CONTROL /* ports can be enabled/disabled via sysfs */
#define PORT_MODE_CONTROL /* ports 5/6 can have SFP/RJ45 mode forced */
MODULE_DESCRIPTION("GW16083 driver");
MODULE_AUTHOR("Tim Harvey");
MODULE_LICENSE("GPL");
struct mv88e1111_port_state {
int port;
bool present;
bool serdes;
bool sfp_signal;
bool sfp_present;
bool sfp_compat;
bool sfp_enabled;
char sfp_id[64];
};
struct mv88e1111_priv {
struct phy_device *phydev;
struct i2c_client *client;
struct mv88e1111_port_state port5;
struct mv88e1111_port_state port6;
struct kobject *sysfs_kobj;
};
enum {
mode_copper = 0,
mode_serdes = 1,
};
static struct i2c_client *gw16083_client = NULL;
static int gw16083_read_port_sfp(struct i2c_client *client,
struct mv88e1111_port_state *state);
/* read switch port register from port0-6 */
u16 read_switch_port(struct phy_device *pdev, int port, u8 regaddr)
{
return pdev->bus->read(pdev->bus, MV_BASE + port, regaddr);
}
/* write switch port register to port0-6 */
int write_switch_port(struct phy_device *pdev, int port, u8 regaddr, u16 val)
{
return pdev->bus->write(pdev->bus, MV_BASE + port, regaddr, val);
}
/*
* read_switch_port_phy - write a register for a specific port on 88E6176
* The 88E6176 PHY registers must be accessed thorugh the Global2 address
* using the SMI_PHY_COMMAND_REG and SMI_PHY_DATA_REG.
*/
int read_switch_port_phy(struct phy_device *pdev, int port, u8 regaddr)
{
u16 reg;
int i;
dev_dbg(&pdev->dev, "read_phy: port%d reg=0x%02x\n", port, regaddr);
reg = SMIBUSY | SMIMODE22 | SMIOP_READ;
reg |= port << DEVADDR;
reg |= regaddr << REGADDR;
pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_COMMAND, reg);
for (i = 0; i < 10; i++) {
reg = pdev->bus->read(pdev->bus, MV_GLOBAL2,
MV_SMI_PHY_COMMAND);
if (!(reg & (1<<15)))
break;
mdelay(1);
}
/* timeout */
if (i == 10)
return 0xffff;
reg = pdev->bus->read(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_DATA);
return reg;
}
/*
* write_switch_port_phy - write a register for a specific port on 88E6176
* The 88E6176 PHY registers must be accessed thorugh the Global2 address
* using the SMI_PHY_COMMAND_REG and SMI_PHY_DATA_REG.
*/
int write_switch_port_phy(struct phy_device *pdev, int port, u8 addr, u16 reg)
{
int i;
dev_dbg(&pdev->dev, "write_phy: port%d reg=0x%02x val=0x%04x\n", port,
addr, reg);
pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_DATA, reg);
reg = SMIBUSY | SMIMODE22 | SMIOP_WRITE;
reg |= port << DEVADDR;
reg |= addr << REGADDR;
pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SMI_PHY_COMMAND, reg);
for (i = 0; i < 10; i++) {
reg = pdev->bus->read(pdev->bus, MV_GLOBAL2,
MV_SMI_PHY_COMMAND);
if (!(reg & (1<<15)))
break;
mdelay(1);
}
/* timeout */
if (i == 10)
return -ETIMEDOUT;
return 0;
}
/* read a scratch register from switch */
inline u8 read_switch_scratch(struct phy_device *pdev, u8 reg)
{
pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SCRATCH_MISC, (reg << 8));
return pdev->bus->read(pdev->bus, MV_GLOBAL2, MV_SCRATCH_MISC) & 0xff;
}
/* write a scratch register to switch */
inline void write_switch_scratch(struct phy_device *pdev, u8 reg, u8 val)
{
pdev->bus->write(pdev->bus, MV_GLOBAL2, MV_SCRATCH_MISC,
(1 << 15) | (reg << 8) | val);
}
/* enable or disable an SFP's TXEN signal */
static int enable_sfp_txen(struct phy_device *pdev, int port, bool enable)
{
u8 gpio;
int bit;
if (port != 5 && port != 6)
return -EINVAL;
/* GPIO[2:1] output low to enable TXEN */
bit = (port == 5) ? 1 : 2;
gpio = read_switch_scratch(pdev, MV_GPIO_DATA);
if (enable)
gpio |= (1 << bit);
else
gpio &= (1 << bit);
write_switch_scratch(pdev, MV_GPIO_DATA, gpio);
dev_info(&pdev->dev, "Port%d: SFP TX %s\n", port, enable ?
"enabled" : "disabled");
return 0;
}
/* configure mv88e1111 port for copper or serdes
* For Copper we set auto link/duplex/speed detection
* For SerDes/Fiber we force 1000mbps link up and auto-neg duplex
*/
static int config_mv88e1111_port_sfp(struct phy_device *pdev, int port,
bool sfp)
{
u16 reg;
if (port != 5 && port != 6)
return -EINVAL;
dev_dbg(&pdev->dev, "%s: Port%d %s\n", __func__, port,
sfp ? "SFP" : "copper");
if (sfp) {
enable_sfp_txen(pdev, port, 1);
/* configure MV88E6176 Physical Control Port Register */
dev_info(&pdev->dev,
"Port%d: SFP: force 1000mbps link up "
"(auto-negotiate duplex)\n",
port);
reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
reg &= ~0x3f; /* clear 5-0 */
reg |= (1 << 4) | (1 << 5); /* force link up */
reg |= 2; /* force 1000mbps */
write_switch_port(pdev, port, MV_PORT_PHYS_CONTROL, reg);
reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
}
/* copper */
else {
enable_sfp_txen(pdev, port, 0);
/* configure MV88E6176 Physical Control Port Register */
dev_info(&pdev->dev,
"Port%d: Copper: set auto-neg link/duplex/speed\n",
port);
reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
reg &= ~0x3f; /* clear 5-0 */
reg |= 3; /* speed not forced */
write_switch_port(pdev, port, MV_PORT_PHYS_CONTROL, reg);
reg = read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL);
}
dev_dbg(&pdev->dev, "%s: Port%d %s PORT_PHYS_CONTROL=0x%04x\n",
__func__, port, sfp ? "SFP" : "copper",
read_switch_port(pdev, port, MV_PORT_PHYS_CONTROL));
return 0;
}
#if defined(PORT_POWER_CONTROL)
static int enable_switch_port(struct phy_device *pdev, int port, bool enable)
{
struct mv88e1111_priv *priv = dev_get_drvdata(&pdev->dev);
u16 reg;
/* power up port */
dev_info(&priv->client->dev, "Port%d: %s\n", port,
enable ? "normal operation" : "power down");
reg = read_switch_port_phy(pdev, port, MV_PHY_CONTROL);
if (enable)
reg &= ~(1 << 11); /* Normal Operation */
else
reg |= (1 << 11); /* power down */
write_switch_port_phy(pdev, port, MV_PHY_CONTROL, reg);
reg = read_switch_port_phy(pdev, port, MV_PHY_CONTROL1);
if (enable)
reg &= ~(1 << 2); /* Normal Operation */
else
reg |= (1 << 2); /* power down */
write_switch_port_phy(pdev, port, MV_PHY_CONTROL1, reg);
return 0;
}
#endif
/*
* Sysfs API
*/
struct mv88e1111_port_state *get_port_state(struct mv88e1111_priv *priv,
int port)
{
if (port == 5)
return &priv->port5;
if (port == 6)
return &priv->port6;
return NULL;
}
/*
* get MV88E6176 port number for a specific GW16083 port name
* The GW16083 ports as shown on the silkscreen are not mapped according to
* the MV88E6176 ports numbers.
*/
static int gw16083_get_port(const char* name)
{
int i;
int map[] = { 3, 2, 1, 0, 5, 6 };
if (strncasecmp(name, "ETHERNET", 8) != 0 || strlen(name) != 9)
return -1;
i = name[8] - '0';
if (i < 1 || i > 6)
return -1;
return map[i-1];
}
static ssize_t port_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct mv88e1111_priv *priv = dev_get_drvdata(dev);
int port = -1;
u16 reg;
if (sscanf(attr->attr.name, "port%d", &port) != 1)
return 0;
if (port < 0 || port > 6)
return 0;
reg = read_switch_port_phy(priv->phydev, port, MV_PHY_CONTROL);
return sprintf(buf, "%s\n", (reg & (1 << 11)) ? "disabled" : "enabled");
}
#if defined(PORT_POWER_CONTROL)
static ssize_t port_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct mv88e1111_priv *priv = dev_get_drvdata(dev);
int port = -1;
int val;
port = gw16083_get_port(attr->attr.name);
if (port < 0)
return 0;
if (sscanf(buf, "%d", &val) != 1)
return 0;
enable_switch_port(priv->phydev, port, val ? 1 : 0);
return count;
}
static DEVICE_ATTR(ethernet1, S_IWUSR | S_IRUGO, port_show, port_store);
static DEVICE_ATTR(ethernet2, S_IWUSR | S_IRUGO, port_show, port_store);
static DEVICE_ATTR(ethernet3, S_IWUSR | S_IRUGO, port_show, port_store);
static DEVICE_ATTR(ethernet4, S_IWUSR | S_IRUGO, port_show, port_store);
static DEVICE_ATTR(ethernet5, S_IWUSR | S_IRUGO, port_show, port_store);
static DEVICE_ATTR(ethernet6, S_IWUSR | S_IRUGO, port_show, port_store);
#else
static DEVICE_ATTR(ethernet1, S_IRUGO, port_show, NULL);
static DEVICE_ATTR(ethernet2, S_IRUGO, port_show, NULL);
static DEVICE_ATTR(ethernet3, S_IRUGO, port_show, NULL);
static DEVICE_ATTR(ethernet4, S_IRUGO, port_show, NULL);
static DEVICE_ATTR(ethernet5, S_IRUGO, port_show, NULL);
static DEVICE_ATTR(ethernet6, S_IRUGO, port_show, NULL);
#endif
static ssize_t portsfp_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct mv88e1111_priv *priv = dev_get_drvdata(dev);
struct mv88e1111_port_state *state;
state = get_port_state(priv, gw16083_get_port(attr->attr.name));
if (!state)
return 0;
if (!state->sfp_present)
return 0;
return sprintf(buf, "%s\n", state->sfp_id);
}
static ssize_t portmode_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct mv88e1111_priv *priv = dev_get_drvdata(dev);
struct mv88e1111_port_state *state;
state = get_port_state(priv, gw16083_get_port(attr->attr.name));
if (!state)
return 0;
return sprintf(buf, "%s\n", state->serdes ? "SFP" : "RJ45");
}
static DEVICE_ATTR(ethernet5_sfp, S_IRUGO, portsfp_show, NULL);
static DEVICE_ATTR(ethernet6_sfp, S_IRUGO, portsfp_show, NULL);
#ifdef PORT_MODE_CONTROL
static ssize_t portmode_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct mv88e1111_priv *priv = dev_get_drvdata(dev);
struct mv88e1111_port_state *state;
u16 reg;
int port;
port = gw16083_get_port(attr->attr.name);
state = get_port_state(priv, port);
if (!state)
return 0;
reg = read_switch_port_phy(priv->phydev, port, MII_M1111_PHY_EXT_SR);
if (strcasecmp(buf, "auto") == 0) {
reg &= ~(1<<15); /* enable auto-selection */
dev_info(&priv->client->dev, "Port%d: enable auto-selection\n",
port);
} else if (strcasecmp(buf, "RJ45") == 0) {
reg |= (1<<15); /* disable auto-selection */
reg |= 0xb; /* RGMII to Copper */
config_mv88e1111_port_sfp(priv->phydev, port, 0);
dev_info(&priv->client->dev, "Port%d: select RJ45\n", port);
} else if (strcasecmp(buf, "SFP") == 0) {
reg |= (1<<15); /* disable auto-selection */
reg |= 0x3; /* RGMII to Fiber */
config_mv88e1111_port_sfp(priv->phydev, port, 1);
dev_info(&priv->client->dev, "Port%d: select SFP\n", port);
}
write_switch_port_phy(priv->phydev, port, MII_M1111_PHY_EXT_SR, reg);
return count;
}
static DEVICE_ATTR(ethernet5_mode, S_IWUSR | S_IRUGO, portmode_show,
portmode_store);
static DEVICE_ATTR(ethernet6_mode, S_IWUSR | S_IRUGO, portmode_show,
portmode_store);
#else
static DEVICE_ATTR(ethernet5_mode, S_IRUGO, portmode_show, NULL);
static DEVICE_ATTR(ethernet6_mode, S_IRUGO, portmode_show, NULL);
#endif
/*
* PHY driver
*/
static int
mv88e6176_config_init(struct phy_device *pdev)
{
dev_dbg(&pdev->dev, "%s\n", __func__);
pdev->state = PHY_RUNNING;
return 0;
}
/* check MV88E1111 PHY status and MV88E6176 GPIO */
static int
mv88e6176_read_status(struct phy_device *pdev)
{
struct mv88e1111_priv *priv = dev_get_drvdata(&pdev->dev);
struct mv88e1111_port_state *state;
bool serdes, sfp_present, sfp_signal;
int port;
int ret = 0;
u16 gpio;
dev_dbg(&pdev->dev, "%s", __func__);
gpio = read_switch_scratch(pdev, MV_GPIO_DATA);
for (port = 5; port < 7; port++) {
serdes = (read_switch_port_phy(pdev, port, MII_M1111_PHY_EXT_SR)
& (1<<13)) ? 1 : 0;
dev_dbg(&pdev->dev, "%s: Port%d GPIO:0x%02x SerDes:%d\n",
__func__, port, gpio, serdes);
switch(port) {
case 5:
state = &priv->port5;
sfp_present = !((gpio >> 5) & 1);
sfp_signal = !((gpio >> 6) & 1);
break;
case 6:
state = &priv->port6;
sfp_present = !((gpio >> 3) & 1);
sfp_signal = !((gpio >> 4) & 1);
break;
}
/*
* on sfp_detect read/verify SFP MSA and set sfp_compat
* on sfp_signal issue link down?
* on serdes auto-select
*/
if (state->sfp_present != sfp_present) {
state->sfp_present = sfp_present;
dev_info(&pdev->dev, "Port%d: SFP %s\n",
port, sfp_present ? "inserted" : "removed");
if (state->sfp_present) {
if (gw16083_read_port_sfp(priv->client, state))
state->sfp_compat = false;
else
state->sfp_compat = true;
} else {
state->sfp_compat = false;
state->sfp_enabled = false;
}
}
if (state->sfp_signal != sfp_signal) {
state->sfp_signal = sfp_signal;
dev_info(&pdev->dev, "Port%d: SFP signal %s\n",
port, sfp_signal ? "detected" : "lost");
}
if (state->serdes != serdes) {
state->serdes = serdes;
dev_info(&pdev->dev, "Port%d: %s auto-selected\n",
port, serdes ? "SERDES" : "copper");
/*
* if auto-selection has switched to copper
* disable serdes
*/
if (!serdes) {
config_mv88e1111_port_sfp(pdev, port, 0);
state->sfp_enabled = false;
}
}
/*
* if serdes and compatible SFP module and not yet enabled
* then enable for serdes
*/
if (serdes && state->sfp_compat && state->sfp_signal &&
!state->sfp_enabled)
{
if (!config_mv88e1111_port_sfp(pdev, port, 1))
state->sfp_enabled = true;
}
}
return ret;
}
static int
mv88e6176_config_aneg(struct phy_device *pdev)
{
dev_dbg(&pdev->dev, "%s", __func__);
return 0;
}
static void
mv88e6176_remove(struct phy_device *pdev)
{
dev_dbg(&pdev->dev, "%s", __func__);
device_remove_file(&pdev->dev, &dev_attr_ethernet1);
device_remove_file(&pdev->dev, &dev_attr_ethernet2);
device_remove_file(&pdev->dev, &dev_attr_ethernet3);
device_remove_file(&pdev->dev, &dev_attr_ethernet4);
device_remove_file(&pdev->dev, &dev_attr_ethernet5);
device_remove_file(&pdev->dev, &dev_attr_ethernet6);
device_remove_file(&pdev->dev, &dev_attr_ethernet5_sfp);
device_remove_file(&pdev->dev, &dev_attr_ethernet6_sfp);
device_remove_file(&pdev->dev, &dev_attr_ethernet5_mode);
device_remove_file(&pdev->dev, &dev_attr_ethernet6_mode);
sysfs_remove_link(kernel_kobj, "gw16083");
}
static int
mv88e6176_probe(struct phy_device *pdev)
{
int port;
int ret = 0;
u32 id, reg;
struct mv88e1111_priv *priv;
dev_dbg(&pdev->dev, "%s: addr=0x%02x bus=%s:%s gw16083_client=%p\n",
__func__, pdev->addr, pdev->bus->name, pdev->bus->id,
gw16083_client);
/* In single-chip addressing mode the MV88E6176 shows up on 0x10-0x16 */
if (pdev->addr != MV_BASE)
return 0;
/* i2c driver needs to be loaded first */
if (!gw16083_client)
return 0;
/* gw16083 has MV88E1676 hanging off of i210 mdio bus */
if (strcmp(pdev->bus->name, "igb_enet_mii_bus") != 0)
return 0;
//dev_info(&pdev->dev, "Detected");
dev_info(&gw16083_client->dev, "%s: MV88E6176 7-port switch detected",
pdev->bus->id);
/*
* port5/6 config: MV88E1111 PHY
* Register 20: PHY Control Register
* R20_7: add delay to RX_CLK for RXD
* R20_1: add delay to TX_CLK for TXD
* Register 24: LED Control Register
* 0x4111:
* Pulse stretch 170 to 340 ms
* Register 0: Control Register
* R0_15: phy reset
*/
for (port = 5; port < 7; port++) {
#ifndef RGMII_DELAY_ON_PHY
write_switch_port(pdev, port, MV_PORT_PHYS_CONTROL, 0xC003);
#endif
id = read_switch_port_phy(pdev, port,
MII_M1111_PHY_IDENT0) << 16;
id |= read_switch_port_phy(pdev, port, MII_M1111_PHY_IDENT1);
if ((id & MII_M1111_PHY_ID_MASK) != MII_M1111_PHY_ID) {
dev_err(&gw16083_client->dev,
"Port%d: No MV88E1111 PHY detected", port);
return 0;
//continue;
}
#ifdef RGMII_DELAY_ON_PHY
/* phy rx/tx delay */
reg = read_switch_port_phy(pdev, port, MII_M1111_PHY_EXT_CR);
reg |= (1<<1) | (1<<7);
write_switch_port_phy(pdev, port, MII_M1111_PHY_EXT_CR, reg);
#endif
/* led config */
write_switch_port_phy(pdev, port, MII_M1111_PHY_LED_CONTROL,
MII_M1111_PHY_LED_PULSE_STR);
/* reset phy */
reg = read_switch_port_phy(pdev, port, MII_M1111_PHY_CONTROL);
reg |= MII_M1111_PHY_CONTROL_RESET;
write_switch_port_phy(pdev, port, MII_M1111_PHY_CONTROL, reg);
dev_info(&gw16083_client->dev,
"Port%d MV88E111 PHY configured\n", port);
}
/*
* GPIO Configuration:
* GPIO1: FIB5_TXEN# (output)
* GPIO2: FIB6_TXEN# (output)
* GPIO3: FIB6_PRES# (input)
* GPIO4: FIB6_LOS (input)
* GPIO5: FIB5_PRES# (input)
* GPIO6: FIB5_LOS (input)
*/
write_switch_scratch(pdev, MV_GPIO_DATA, 0x06); /* GPIO[2:1] out hi */
write_switch_scratch(pdev, MV_GPIO_DIR, 0x78); /* GPIO[6:3] inp */
pdev->irq = PHY_POLL;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
memset(priv, 0, sizeof(*priv));
priv->phydev = pdev;
priv->client = gw16083_client;
priv->port5.port = 5;
priv->port6.port = 6;
dev_set_drvdata(&pdev->dev, priv);
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet1);
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet2);
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet3);
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet4);
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet5);
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet6);
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet5_sfp);
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet6_sfp);
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet5_mode);
ret |= device_create_file(&pdev->dev, &dev_attr_ethernet6_mode);
if (unlikely(ret))
dev_err(&pdev->dev, "Failed creating attrs\n");
/* Add a nice symlink to the real device */
ret = sysfs_create_link(kernel_kobj, &pdev->dev.kobj, "gw16083");
dev_dbg(&pdev->dev, "initial state: GPIO=0x%02x "
"Port5_serdes=%d Port6_serdes=%d\n",
read_switch_scratch(pdev, MV_GPIO_DATA),
(read_switch_port_phy(pdev, 5, MII_M1111_PHY_EXT_SR)
& (1<<13) ? 1:0),
(read_switch_port_phy(pdev, 6, MII_M1111_PHY_EXT_SR)
& (1<<13) ? 1:0));
return ret;
}
static struct phy_driver mv88e6176_phy_driver = {
.name = "MV88E6176",
.phy_id = MV_IDENT_VALUE,
.phy_id_mask = MV_IDENT_MASK,
.features = PHY_BASIC_FEATURES,
.probe = &mv88e6176_probe,
.remove = &mv88e6176_remove,
.config_init = &mv88e6176_config_init,
.config_aneg = &mv88e6176_config_aneg,
.read_status = &mv88e6176_read_status,
.driver = { .owner = THIS_MODULE },
};
/*
* I2C driver
*/
/* See SFF-8472 */
struct sfp_msa {
/* Basic ID fields */
u8 identifier;
u8 ext_identifier;
u8 connector;
u8 transceiver[8];
u8 encoding;
u8 br_nominal;
u8 rate_identifier;
u8 length_smf_km;
u8 length_smf;
u8 length_om2;
u8 length_om1;
u8 length_om4;
u8 length_om3;
u8 vendor_name[16];
u8 transceiver2;
u8 vendor_oui[3];
u8 vendor_pn[16];
u8 vendor_rev[4];
u8 wavelength[2];
u8 resv1;
u8 cc_base;
/* extended id fields */
u8 options[2];
u8 br_max;
u8 br_min;
u8 vendor_sn[16];
u8 date_code[8];
u8 diags_type;
u8 enhanced_options;
u8 sff8472_compliance;
u8 cc_ext;
/* Vendor specific ID fields */
u8 vendor_data[32];
u8 sff8079[128];
};
enum identifier {
UNKNOWN,
GBIC,
SFF,
SFP,
XBI,
XENPACK,
XFP,
XFF,
XFP_E,
XPAK,
X2,
DWDM_SFP,
QSFP,
MAX_ID,
};
const char* id_names[] = {
"UNKONWN",
"GBIC",
"SFF",
"SFP",
NULL,
};
/* Flags for SFP modules compatible with ETH up to 1Gb */
struct sfp_flags {
u8 e1000_base_sx:1;
u8 e1000_base_lx:1;
u8 e1000_base_cx:1;
u8 e1000_base_t:1;
u8 e100_base_lx:1;
u8 e100_base_fx:1;
u8 e10_base_bx10:1;
u8 e10_base_px:1;
};
#define STRING_APPEND(str, src) \
strncat(str, src, sizeof(src)); \
for (i = 1; i < sizeof(str); i++) \
if (str[i-1] == ' ' && str[i] == ' ') \
str[i] = 0;
static int gw16083_read_port_sfp(struct i2c_client *client,
struct mv88e1111_port_state *state)
{
int ret = 0;
u8 data[256];
struct sfp_flags *eth_flags;
u8 crc;
int i;
u8 *str;
struct sfp_msa *sfp_msa = (struct sfp_msa *)data;
int port = state->port;
union i2c_smbus_data d;
dev_dbg(&client->dev, "%s Port%d\n", __func__, port);
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_I2C_BLOCK))
return -ENODEV;
d.byte = (port == 5) ? 1 : 2;
if (i2c_smbus_xfer(client->adapter, GW16083_I2C_ADDR_PCA9543,
client->flags, I2C_SMBUS_WRITE, 0,
I2C_SMBUS_BYTE_DATA, &d) < 0)
{
dev_err(&client->dev,
"Port%d: failed writing PCA9543 register\n", port);
return ret;
}
/* read all 256 bytes of SFP EEPROM */
for (i = 0; i < sizeof(data); i += I2C_SMBUS_BLOCK_MAX) {
d.block[0] = I2C_SMBUS_BLOCK_MAX;
if (i2c_smbus_xfer(client->adapter, GW16083_I2C_ADDR_SFP1,
client->flags, I2C_SMBUS_READ, i,
I2C_SMBUS_I2C_BLOCK_DATA, &d) < 0)
{
dev_err(&client->dev,
"Port%d: failed reading SFP data\n", port);
return ret;
}
memcpy(data + i, d.block + 1, I2C_SMBUS_BLOCK_MAX);
}
/* Validate checksums */
for (crc = 0, i = 0; i < 63; i++)
crc += data[i];
if (crc != sfp_msa->cc_base) {
dev_err(&client->dev, "Port%d: "
"Checksum failure for Base ID fields: 0x%02x\n", port,
crc);
#ifdef FAIL_ON_CHECKSUM_ERR
return -EINVAL;
#endif
}
for (crc = 0, i = 64; i < 95; i++)
crc += data[i];
if (crc != sfp_msa->cc_ext) {
dev_err(&client->dev, "Port%d: "
"Checksum failure for Extended ID fields: 0x%02x\n",
port, crc);
#ifdef FAIL_ON_CHECKSUM_ERR
return -EINVAL;
#endif
}
state->sfp_id[0] = 0;
for (i = 0; id_names[i]; i++) {
if (sfp_msa->identifier == i) {
sprintf(state->sfp_id, "%s: ", id_names[i]);
break;
}
}
STRING_APPEND(state->sfp_id, sfp_msa->vendor_oui);
STRING_APPEND(state->sfp_id, sfp_msa->vendor_name);
STRING_APPEND(state->sfp_id, sfp_msa->vendor_pn);
STRING_APPEND(state->sfp_id, sfp_msa->vendor_rev);
STRING_APPEND(state->sfp_id, sfp_msa->vendor_sn);
dev_info(&client->dev, "Port%d: %s\n", port, state->sfp_id);
if ((sfp_msa->identifier != GBIC) &&
(sfp_msa->identifier != SFF) &&
(sfp_msa->identifier != SFP))
{
dev_err(&client->dev, "Port%d: Unknown module identifier: %d\n",
port, sfp_msa->identifier);
return -EINVAL;
}
str = "";
eth_flags = (struct sfp_flags *)(sfp_msa->transceiver + 3);
if (eth_flags->e1000_base_sx) {
str = "1000Base-SX (Fiber)";
} else if (eth_flags->e1000_base_lx) {
str = "1000Base-LX (Fiber)";
} else if (eth_flags->e1000_base_t) {
str = "1000Base-T (Copper)";
} else if (eth_flags->e100_base_fx) {
str = "100Base-FX (Fiber) - not supported";
ret = -EINVAL;
} else {
str = "Unknown/Unsupported media type";
ret = -EINVAL;
}
if (ret)
dev_err(&client->dev, "Port%d: %s (0x%02x)\n", port, str,
sfp_msa->transceiver[3]);
else
dev_info(&client->dev, "Port%d: %s (0x%02x)\n", port, str,
sfp_msa->transceiver[3]);
return ret;
}
static int gw16083_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
dev_info(&client->dev, "GW16083 Ethernet Expansion Mezzanine\n");
if (gw16083_client) {
dev_err(&client->dev, "client already registered\n");
return -EINVAL;
}
gw16083_client = client;
ret = phy_driver_register(&mv88e6176_phy_driver);
if (ret)
dev_err(&client->dev,
"failed to register mv88e6176 phy driver: %d\n", ret);
return ret;
}
static int gw16083_remove(struct i2c_client *client)
{
dev_dbg(&client->dev, "%s\n", __func__);
phy_driver_unregister(&mv88e6176_phy_driver);
gw16083_client = NULL;
return 0;
}
static const struct of_device_id gw16083_dt_ids[] = {
{ .compatible = "gateworks,gw16083", },
{ }
};
MODULE_DEVICE_TABLE(of, gw16083_dt_ids);
static const struct i2c_device_id gw16083_id[] = {
{ "gw16083", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, gw16083_id);
static struct i2c_driver gw16083_driver = {
.driver = {
.name = "gw16083",
.of_match_table = gw16083_dt_ids,
},
.probe = gw16083_probe,
.remove = gw16083_remove,
.id_table = gw16083_id,
};
static int __init mv88e6176_init(void)
{
return i2c_add_driver(&gw16083_driver);
}
static void __exit mv88e6176_exit(void)
{
i2c_del_driver(&gw16083_driver);
}
module_init(mv88e6176_init);
module_exit(mv88e6176_exit);
Reference in New Issue View Git Blame Copy Permalink