OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Felix Fietkau 60a5ab1efe ramips: add preliminary Archer C20i support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-01-09 15:40:51 +00:00
config kernel: add SECCOMP to menuconfig 2015-01-08 21:23:18 +00:00
docs docs: update remaining references to functions.sh 2012-12-20 15:29:33 +00:00
include [generic/3.18]: upgrade to 3.18.2 2015-01-09 12:35:19 +00:00
package gettext-full: update to v0.19.4 2015-01-09 14:51:29 +00:00
scripts scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
target ramips: add preliminary Archer C20i support 2015-01-09 15:40:51 +00:00
toolchain binutils: run install twice instead of overwriting the final toolchain with the initial one 2014-12-27 13:00:09 +00:00
tools tools/firmware-utils: add version 3 header support for mktplinkfw2 2015-01-09 15:40:39 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore add git-src to .gitignore 2014-01-12 12:06:39 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile Revert "build: use ONESHELL to speed up scanning and the toplevel makefile" 2014-10-22 10:47:26 +00:00
README Add 'subversion' build dependency to README 2014-08-31 12:06:32 +00:00
feeds.conf.default Move telephony feed to github 2014-12-11 10:30:51 +00:00
rules.mk build: use gcc-provided ar, nm and ranlib where appropriate 2014-12-27 12:59:59 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org