wifipineapple-openwrt/target/linux/brcm63xx
Florian Fainelli 4e2d90b5b8 [brcm63xx] give some credits to Tanguy Bouzeloc in the spi driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-27 02:11:08 +00:00
..
base-files base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it. 2010-12-26 04:18:04 +00:00
files/arch/mips/include/asm/mach-bcm63xx Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size. 2010-12-26 04:18:13 +00:00
image [brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. 2010-12-10 18:59:58 +00:00
patches-2.6.35 [brcm63xx] give some credits to Tanguy Bouzeloc in the spi driver 2011-01-27 02:11:08 +00:00
profiles [brcm63xx] Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. 2010-12-08 00:40:31 +00:00
Makefile [brcm63xx] Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases. 2010-12-08 00:40:28 +00:00
base-files.mk bcm63xx: Add defconfigs. 2010-11-28 22:04:19 +00:00
config-2.6.35 [brcm63xx] restore kernel oldconfig 2010-10-17 14:09:24 +00:00
modules.mk massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950 2010-07-12 14:06:13 +00:00