wifipineapple-openwrt/package/uboot-ar71xx/files/board/zyxel/nbg460n/nbg460n.c

97 lines
2.5 KiB
C

/*
* (C) Copyright 2010
* Michael Kurz <michi.kurz@googlemail.com>.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/reboot.h>
#include <asm/ar71xx.h>
#include <asm/ar71xx_gpio.h>
#define NBG460N_WAN_LED 19
phys_size_t initdram(int board_type)
{
return (32*1024*1024);
}
int checkboard(void)
{
// Set pin 19 to 1, to stop WAN LED blinking
ar71xx_setpindir(NBG460N_WAN_LED, 1);
ar71xx_setpin(NBG460N_WAN_LED, 1);
printf("U-boot on Zyxel NBG460N\n");
return 0;
}
void _machine_restart(void)
{
for (;;) {
writel((RESET_MODULE_FULL_CHIP | RESET_MODULE_DDR),
KSEG1ADDR(AR71XX_RESET_BASE + AR91XX_RESET_REG_RESET_MODULE));
readl(KSEG1ADDR(AR71XX_RESET_BASE + AR91XX_RESET_REG_RESET_MODULE));
}
}
int board_eth_init(bd_t *bis)
{
char *phynames[] = {RTL8366_DEVNAME, RTL8366_DEVNAME};
u16 phyids[] = {RTL8366_LANPHY_ID, RTL8366_WANPHY_ID};
u16 phyfixed[] = {1, 0};
if (ag71xx_register(bis, phynames, phyids, phyfixed) <= 0)
return -1;
if (rtl8366s_initialize())
return -1;
if (rtl8366_mii_register(bis))
return -1;
return 0;
}
int misc_init_r(void) {
uint8_t macaddr[6];
uint8_t enetaddr[6];
debug("Testing mac addresses\n");
memcpy(macaddr, (uint8_t *) CONFIG_ETHADDR_ADDR, 6);
if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
debug("Setting eth0 mac addr to %pM\n", macaddr);
eth_setenv_enetaddr("ethaddr", macaddr);
}
if (!eth_getenv_enetaddr("eth1addr", enetaddr)) {
macaddr[5] += 1;
debug("Setting eth1 mac addr to %pM\n", macaddr);
eth_setenv_enetaddr("eth1addr", macaddr);
}
return 0;
}