OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Michael Büsch 527d32f28f omap24xx: Update to 2.6.36-rc6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23157 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-30 09:50:04 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include fix build dependencies on packages with multiple variants but no selected virtual packages 2010-09-20 20:17:28 +00:00
package package/grub: fix compile issue under FreeBSD 8.1 2010-09-29 16:27:00 +00:00
scripts fix build dependencies on packages with multiple variants but no selected virtual packages 2010-09-20 20:17:28 +00:00
target omap24xx: Update to 2.6.36-rc6 2010-09-30 09:50:04 +00:00
toolchain gcc: enable non-PIC for mips targets in gcc 4.4+ to reduce code size 2010-09-20 20:49:34 +00:00
tools firmware-utils/mktplinkfw: add support for the TL-MR3420 v1 2010-09-27 14:54:02 +00:00
.gitignore .gitignore: Undo accidental commit. 2010-05-10 17:59:05 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in Add support for enabling early printk. 2010-09-15 16:27:02 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
feeds.conf.default Add lxde feed to feeds.conf.default 2010-08-12 19:03:44 +00:00
rules.mk [buildroot] drop the usr/ prefix when scanning for libgcc.a 2010-09-12 22:19:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org