hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
wifipineapple-openwrt/target/linux/generic/patches-2.6.39/020-ssb_update.patch

932 lines
30 KiB
Diff
Raw Blame History

--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb
if (!ccdev)
return;
bus = ccdev->bus;
+
+ /* We support SLOW only on 6..9 */
+ if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW)
+ mode = SSB_CLKMODE_DYNAMIC;
+
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
+ return; /* PMU controls clockmode, separated function needed */
+ SSB_WARN_ON(ccdev->id.revision >= 20);
+
/* chipcommon cores prior to rev6 don't support dynamic clock control */
if (ccdev->id.revision < 6)
return;
- /* chipcommon cores rev10 are a whole new ball game */
+
+ /* ChipCommon cores rev10+ need testing */
if (ccdev->id.revision >= 10)
return;
+
if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
return;
switch (mode) {
- case SSB_CLKMODE_SLOW:
+ case SSB_CLKMODE_SLOW: /* For revs 6..9 only */
tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
break;
case SSB_CLKMODE_FAST:
- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
- tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ if (ccdev->id.revision < 10) {
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+ } else {
+ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
+ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) |
+ SSB_CHIPCO_SYSCLKCTL_FORCEHT));
+ /* udelay(150); TODO: not available in early init */
+ }
break;
case SSB_CLKMODE_DYNAMIC:
- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
- if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
- tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
-
- /* for dynamic control, we have to release our xtal_pu "force on" */
- if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
+ if (ccdev->id.revision < 10) {
+ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
+ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+ if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) !=
+ SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
+ tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
+ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
+
+ /* For dynamic control, we have to release our xtal_pu
+ * "force on" */
+ if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
+ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
+ } else {
+ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
+ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
+ ~SSB_CHIPCO_SYSCLKCTL_FORCEHT));
+ }
break;
default:
SSB_WARN_ON(1);
@@ -260,6 +286,12 @@ void ssb_chipcommon_init(struct ssb_chip
if (cc->dev->id.revision >= 11)
cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+
+ if (cc->dev->id.revision >= 20) {
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
+ chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0);
+ }
+
ssb_pmu_init(cc);
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc
u32 min_msk = 0, max_msk = 0;
unsigned int i;
const struct pmu_res_updown_tab_entry *updown_tab = NULL;
- unsigned int updown_tab_size;
+ unsigned int updown_tab_size = 0;
const struct pmu_res_depend_tab_entry *depend_tab = NULL;
- unsigned int depend_tab_size;
+ unsigned int depend_tab_size = 0;
switch (bus->chip_id) {
case 0x4312:
+ min_msk = 0xCBB;
+ break;
case 0x4322:
/* We keep the default settings:
* min_msk = 0xCBB
--- a/drivers/ssb/driver_gige.c
+++ b/drivers/ssb/driver_gige.c
@@ -106,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige
gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
}
-static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int reg, int size, u32 *val)
+static int __devinit ssb_gige_pci_read_config(struct pci_bus *bus,
+ unsigned int devfn, int reg,
+ int size, u32 *val)
{
struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
unsigned long flags;
@@ -136,8 +137,9 @@ static int ssb_gige_pci_read_config(stru
return PCIBIOS_SUCCESSFUL;
}
-static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int reg, int size, u32 val)
+static int __devinit ssb_gige_pci_write_config(struct pci_bus *bus,
+ unsigned int devfn, int reg,
+ int size, u32 val)
{
struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
unsigned long flags;
@@ -166,7 +168,8 @@ static int ssb_gige_pci_write_config(str
return PCIBIOS_SUCCESSFUL;
}
-static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
+static int __devinit ssb_gige_probe(struct ssb_device *sdev,
+ const struct ssb_device_id *id)
{
struct ssb_gige *dev;
u32 base, tmslow, tmshigh;
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -15,6 +15,11 @@
#include "ssb_private.h"
+static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address);
+static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data);
+static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address);
+static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
+ u8 address, u16 data);
static inline
u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
@@ -309,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st
return ssb_mips_irq(extpci_core->dev) + 2;
}
-static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
+static void __devinit ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
{
u32 val;
@@ -374,7 +379,7 @@ static void ssb_pcicore_init_hostmode(st
register_pci_controller(&ssb_pcicore_controller);
}
-static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
+static int __devinit pcicore_is_in_hostmode(struct ssb_pcicore *pc)
{
struct ssb_bus *bus = pc->dev->bus;
u16 chipid_top;
@@ -403,28 +408,129 @@ static int pcicore_is_in_hostmode(struct
}
#endif /* CONFIG_SSB_PCICORE_HOSTMODE */
+/**************************************************
+ * Workarounds.
+ **************************************************/
+
+static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc)
+{
+ u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0));
+ if (((tmp & 0xF000) >> 12) != pc->dev->core_index) {
+ tmp &= ~0xF000;
+ tmp |= (pc->dev->core_index << 12);
+ pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp);
+ }
+}
+
+static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc)
+{
+ return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
+}
+
+static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc)
+{
+ const u8 serdes_pll_device = 0x1D;
+ const u8 serdes_rx_device = 0x1F;
+ u16 tmp;
+
+ ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
+ ssb_pcicore_polarity_workaround(pc));
+ tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
+ if (tmp & 0x4000)
+ ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
+}
+
+static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc)
+{
+ struct ssb_device *pdev = pc->dev;
+ struct ssb_bus *bus = pdev->bus;
+ u32 tmp;
+
+ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+ tmp |= SSB_PCICORE_SBTOPCI_PREF;
+ tmp |= SSB_PCICORE_SBTOPCI_BURST;
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+
+ if (pdev->id.revision < 5) {
+ tmp = ssb_read32(pdev, SSB_IMCFGLO);
+ tmp &= ~SSB_IMCFGLO_SERTO;
+ tmp |= 2;
+ tmp &= ~SSB_IMCFGLO_REQTO;
+ tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
+ ssb_write32(pdev, SSB_IMCFGLO, tmp);
+ ssb_commit_settings(bus);
+ } else if (pdev->id.revision >= 11) {
+ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
+ tmp |= SSB_PCICORE_SBTOPCI_MRM;
+ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
+ }
+}
+
+static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
+{
+ u32 tmp;
+ u8 rev = pc->dev->id.revision;
+
+ if (rev == 0 || rev == 1) {
+ /* TLP Workaround register. */
+ tmp = ssb_pcie_read(pc, 0x4);
+ tmp |= 0x8;
+ ssb_pcie_write(pc, 0x4, tmp);
+ }
+ if (rev == 1) {
+ /* DLLP Link Control register. */
+ tmp = ssb_pcie_read(pc, 0x100);
+ tmp |= 0x40;
+ ssb_pcie_write(pc, 0x100, tmp);
+ }
+
+ if (rev == 0) {
+ const u8 serdes_rx_device = 0x1F;
+
+ ssb_pcie_mdio_write(pc, serdes_rx_device,
+ 2 /* Timer */, 0x8128);
+ ssb_pcie_mdio_write(pc, serdes_rx_device,
+ 6 /* CDR */, 0x0100);
+ ssb_pcie_mdio_write(pc, serdes_rx_device,
+ 7 /* CDR BW */, 0x1466);
+ } else if (rev == 3 || rev == 4 || rev == 5) {
+ /* TODO: DLLP Power Management Threshold */
+ ssb_pcicore_serdes_workaround(pc);
+ /* TODO: ASPM */
+ } else if (rev == 7) {
+ /* TODO: No PLL down */
+ }
+
+ if (rev >= 6) {
+ /* Miscellaneous Configuration Fixup */
+ tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5));
+ if (!(tmp & 0x8000))
+ pcicore_write16(pc, SSB_PCICORE_SPROM(5),
+ tmp | 0x8000);
+ }
+}
/**************************************************
* Generic and Clientmode operation code.
**************************************************/
-static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
+static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
{
/* Disable PCI interrupts. */
ssb_write32(pc->dev, SSB_INTVEC, 0);
}
-void ssb_pcicore_init(struct ssb_pcicore *pc)
+void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
{
struct ssb_device *dev = pc->dev;
- struct ssb_bus *bus;
if (!dev)
return;
- bus = dev->bus;
if (!ssb_device_is_enabled(dev))
ssb_device_enable(dev, 0);
+ ssb_pcicore_fix_sprom_core_index(pc);
+
#ifdef CONFIG_SSB_PCICORE_HOSTMODE
pc->hostmode = pcicore_is_in_hostmode(pc);
if (pc->hostmode)
@@ -432,6 +538,13 @@ void ssb_pcicore_init(struct ssb_pcicore
#endif /* CONFIG_SSB_PCICORE_HOSTMODE */
if (!pc->hostmode)
ssb_pcicore_init_clientmode(pc);
+
+ /* Additional PCIe always once-executed workarounds */
+ if (dev->id.coreid == SSB_DEV_PCIE) {
+ ssb_pcicore_serdes_workaround(pc);
+ /* TODO: ASPM */
+ /* TODO: Clock Request Update */
+ }
}
static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
@@ -446,11 +559,35 @@ static void ssb_pcie_write(struct ssb_pc
pcicore_write32(pc, 0x134, data);
}
-static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
- u8 address, u16 data)
+static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy)
+{
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ u32 v;
+ int i;
+
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 28); /* Write Transaction */
+ v |= (1 << 17); /* Turnaround */
+ v |= (0x1F << 18);
+ v |= (phy << 4);
+ pcicore_write32(pc, mdio_data, v);
+
+ udelay(10);
+ for (i = 0; i < 200; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */)
+ break;
+ msleep(1);
+ }
+}
+
+static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address)
{
const u16 mdio_control = 0x128;
const u16 mdio_data = 0x12C;
+ int max_retries = 10;
+ u16 ret = 0;
u32 v;
int i;
@@ -458,46 +595,68 @@ static void ssb_pcie_mdio_write(struct s
v |= 0x2; /* MDIO Clock Divisor */
pcicore_write32(pc, mdio_control, v);
+ if (pc->dev->id.revision >= 10) {
+ max_retries = 200;
+ ssb_pcie_mdio_set_phy(pc, device);
+ }
+
v = (1 << 30); /* Start of Transaction */
- v |= (1 << 28); /* Write Transaction */
+ v |= (1 << 29); /* Read Transaction */
v |= (1 << 17); /* Turnaround */
- v |= (u32)device << 22;
+ if (pc->dev->id.revision < 10)
+ v |= (u32)device << 22;
v |= (u32)address << 18;
- v |= data;
pcicore_write32(pc, mdio_data, v);
/* Wait for the device to complete the transaction */
udelay(10);
- for (i = 0; i < 10; i++) {
+ for (i = 0; i < max_retries; i++) {
v = pcicore_read32(pc, mdio_control);
- if (v & 0x100 /* Trans complete */)
+ if (v & 0x100 /* Trans complete */) {
+ udelay(10);
+ ret = pcicore_read32(pc, mdio_data);
break;
+ }
msleep(1);
}
pcicore_write32(pc, mdio_control, 0);
+ return ret;
}
-static void ssb_broadcast_value(struct ssb_device *dev,
- u32 address, u32 data)
+static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
+ u8 address, u16 data)
{
- /* This is used for both, PCI and ChipCommon core, so be careful. */
- BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
- BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ int max_retries = 10;
+ u32 v;
+ int i;
- ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
- ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
- ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
- ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
-}
+ v = 0x80; /* Enable Preamble Sequence */
+ v |= 0x2; /* MDIO Clock Divisor */
+ pcicore_write32(pc, mdio_control, v);
-static void ssb_commit_settings(struct ssb_bus *bus)
-{
- struct ssb_device *dev;
+ if (pc->dev->id.revision >= 10) {
+ max_retries = 200;
+ ssb_pcie_mdio_set_phy(pc, device);
+ }
- dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
- if (WARN_ON(!dev))
- return;
- /* This forces an update of the cached registers. */
- ssb_broadcast_value(dev, 0xFD8, 0);
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 28); /* Write Transaction */
+ v |= (1 << 17); /* Turnaround */
+ if (pc->dev->id.revision < 10)
+ v |= (u32)device << 22;
+ v |= (u32)address << 18;
+ v |= data;
+ pcicore_write32(pc, mdio_data, v);
+ /* Wait for the device to complete the transaction */
+ udelay(10);
+ for (i = 0; i < max_retries; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */)
+ break;
+ msleep(1);
+ }
+ pcicore_write32(pc, mdio_control, 0);
}
int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
@@ -550,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc
if (pc->setup_done)
goto out;
if (pdev->id.coreid == SSB_DEV_PCI) {
- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
- tmp |= SSB_PCICORE_SBTOPCI_PREF;
- tmp |= SSB_PCICORE_SBTOPCI_BURST;
- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
-
- if (pdev->id.revision < 5) {
- tmp = ssb_read32(pdev, SSB_IMCFGLO);
- tmp &= ~SSB_IMCFGLO_SERTO;
- tmp |= 2;
- tmp &= ~SSB_IMCFGLO_REQTO;
- tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
- ssb_write32(pdev, SSB_IMCFGLO, tmp);
- ssb_commit_settings(bus);
- } else if (pdev->id.revision >= 11) {
- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
- tmp |= SSB_PCICORE_SBTOPCI_MRM;
- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
- }
+ ssb_pcicore_pci_setup_workarounds(pc);
} else {
WARN_ON(pdev->id.coreid != SSB_DEV_PCIE);
- //TODO: Better make defines for all these magic PCIE values.
- if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) {
- /* TLP Workaround register. */
- tmp = ssb_pcie_read(pc, 0x4);
- tmp |= 0x8;
- ssb_pcie_write(pc, 0x4, tmp);
- }
- if (pdev->id.revision == 0) {
- const u8 serdes_rx_device = 0x1F;
-
- ssb_pcie_mdio_write(pc, serdes_rx_device,
- 2 /* Timer */, 0x8128);
- ssb_pcie_mdio_write(pc, serdes_rx_device,
- 6 /* CDR */, 0x0100);
- ssb_pcie_mdio_write(pc, serdes_rx_device,
- 7 /* CDR BW */, 0x1466);
- } else if (pdev->id.revision == 1) {
- /* DLLP Link Control register. */
- tmp = ssb_pcie_read(pc, 0x100);
- tmp |= 0x40;
- ssb_pcie_write(pc, 0x100, tmp);
- }
+ ssb_pcicore_pcie_setup_workarounds(pc);
}
pc->setup_done = 1;
out:
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -557,7 +557,7 @@ error:
}
/* Needs ssb_buses_lock() */
-static int ssb_attach_queued_buses(void)
+static int __devinit ssb_attach_queued_buses(void)
{
struct ssb_bus *bus, *n;
int err = 0;
@@ -768,9 +768,9 @@ out:
return err;
}
-static int ssb_bus_register(struct ssb_bus *bus,
- ssb_invariants_func_t get_invariants,
- unsigned long baseaddr)
+static int __devinit ssb_bus_register(struct ssb_bus *bus,
+ ssb_invariants_func_t get_invariants,
+ unsigned long baseaddr)
{
int err;
@@ -851,8 +851,8 @@ err_disable_xtal:
}
#ifdef CONFIG_SSB_PCIHOST
-int ssb_bus_pcibus_register(struct ssb_bus *bus,
- struct pci_dev *host_pci)
+int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus,
+ struct pci_dev *host_pci)
{
int err;
@@ -875,9 +875,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
#endif /* CONFIG_SSB_PCIHOST */
#ifdef CONFIG_SSB_PCMCIAHOST
-int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
- struct pcmcia_device *pcmcia_dev,
- unsigned long baseaddr)
+int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus,
+ struct pcmcia_device *pcmcia_dev,
+ unsigned long baseaddr)
{
int err;
@@ -897,8 +897,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register
#endif /* CONFIG_SSB_PCMCIAHOST */
#ifdef CONFIG_SSB_SDIOHOST
-int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
- unsigned int quirks)
+int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus,
+ struct sdio_func *func,
+ unsigned int quirks)
{
int err;
@@ -918,9 +919,9 @@ int ssb_bus_sdiobus_register(struct ssb_
EXPORT_SYMBOL(ssb_bus_sdiobus_register);
#endif /* CONFIG_SSB_PCMCIAHOST */
-int ssb_bus_ssbbus_register(struct ssb_bus *bus,
- unsigned long baseaddr,
- ssb_invariants_func_t get_invariants)
+int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus,
+ unsigned long baseaddr,
+ ssb_invariants_func_t get_invariants)
{
int err;
@@ -1001,8 +1002,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
switch (plltype) {
case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
if (m & SSB_CHIPCO_CLK_T6_MMASK)
- return SSB_CHIPCO_CLK_T6_M0;
- return SSB_CHIPCO_CLK_T6_M1;
+ return SSB_CHIPCO_CLK_T6_M1;
+ return SSB_CHIPCO_CLK_T6_M0;
case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
@@ -1117,23 +1118,22 @@ static u32 ssb_tmslow_reject_bitmask(str
{
u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
- /* The REJECT bit changed position in TMSLOW between
- * Backplane revisions. */
+ /* The REJECT bit seems to be different for Backplane rev 2.3 */
switch (rev) {
case SSB_IDLOW_SSBREV_22:
- return SSB_TMSLOW_REJECT_22;
+ case SSB_IDLOW_SSBREV_24:
+ case SSB_IDLOW_SSBREV_26:
+ return SSB_TMSLOW_REJECT;
case SSB_IDLOW_SSBREV_23:
return SSB_TMSLOW_REJECT_23;
- case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */
- case SSB_IDLOW_SSBREV_25: /* same here */
- case SSB_IDLOW_SSBREV_26: /* same here */
+ case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
case SSB_IDLOW_SSBREV_27: /* same here */
- return SSB_TMSLOW_REJECT_23; /* this is a guess */
+ return SSB_TMSLOW_REJECT; /* this is a guess */
default:
printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
WARN_ON(1);
}
- return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
+ return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
}
int ssb_device_is_enabled(struct ssb_device *dev)
@@ -1309,20 +1309,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
{
- struct ssb_chipcommon *cc;
int err;
enum ssb_clkmode mode;
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
if (err)
goto error;
- cc = &bus->chipco;
- mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
- ssb_chipco_set_clockmode(cc, mode);
#ifdef CONFIG_SSB_DEBUG
bus->powered_up = 1;
#endif
+
+ mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
+ ssb_chipco_set_clockmode(&bus->chipco, mode);
+
return 0;
error:
ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
@@ -1330,6 +1330,37 @@ error:
}
EXPORT_SYMBOL(ssb_bus_powerup);
+static void ssb_broadcast_value(struct ssb_device *dev,
+ u32 address, u32 data)
+{
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+ /* This is used for both, PCI and ChipCommon core, so be careful. */
+ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
+ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
+#endif
+
+ ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address);
+ ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */
+ ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data);
+ ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */
+}
+
+void ssb_commit_settings(struct ssb_bus *bus)
+{
+ struct ssb_device *dev;
+
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
+#else
+ dev = bus->chipco.dev;
+#endif
+ if (WARN_ON(!dev))
+ return;
+ /* This forces an update of the cached registers. */
+ ssb_broadcast_value(dev, 0xFD8, 0);
+}
+EXPORT_SYMBOL(ssb_commit_settings);
+
u32 ssb_admatch_base(u32 adm)
{
u32 base = 0;
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
- const struct ssb_sprom *fallback;
int err;
u16 *buf;
@@ -707,10 +706,17 @@ static int ssb_pci_sprom_get(struct ssb_
if (err) {
/* All CRC attempts failed.
* Maybe there is no SPROM on the device?
- * If we have a fallback, use that. */
- fallback = ssb_get_fallback_sprom();
- if (fallback) {
- memcpy(sprom, fallback, sizeof(*sprom));
+ * Now we ask the arch code if there is some sprom
+ * available for this device in some other storage */
+ err = ssb_fill_sprom_with_fallback(bus, sprom);
+ if (err) {
+ ssb_printk(KERN_WARNING PFX "WARNING: Using"
+ " fallback SPROM failed (err %d)\n",
+ err);
+ } else {
+ ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+ " revision %d provided by"
+ " platform.\n", sprom->revision);
err = 0;
goto out_free;
}
--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
@@ -53,8 +53,8 @@ static int ssb_pcihost_resume(struct pci
# define ssb_pcihost_resume NULL
#endif /* CONFIG_PM */
-static int ssb_pcihost_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
+static int __devinit ssb_pcihost_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
struct ssb_bus *ssb;
int err = -ENOMEM;
@@ -110,7 +110,7 @@ static void ssb_pcihost_remove(struct pc
pci_set_drvdata(dev, NULL);
}
-int ssb_pcihost_register(struct pci_driver *driver)
+int __devinit ssb_pcihost_register(struct pci_driver *driver)
{
driver->probe = ssb_pcihost_probe;
driver->remove = ssb_pcihost_remove;
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -258,7 +258,10 @@ static int we_support_multiple_80211_cor
#ifdef CONFIG_SSB_PCIHOST
if (bus->bustype == SSB_BUSTYPE_PCI) {
if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
- bus->host_pci->device == 0x4324)
+ ((bus->host_pci->device == 0x4313) ||
+ (bus->host_pci->device == 0x431A) ||
+ (bus->host_pci->device == 0x4321) ||
+ (bus->host_pci->device == 0x4324)))
return 1;
}
#endif /* CONFIG_SSB_PCIHOST */
@@ -307,8 +310,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
} else {
if (bus->bustype == SSB_BUSTYPE_PCI) {
bus->chip_id = pcidev_to_chipid(bus->host_pci);
- pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
- &bus->chip_rev);
+ bus->chip_rev = bus->host_pci->revision;
bus->chip_package = 0;
} else {
bus->chip_id = 0x4710;
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -17,7 +17,7 @@
#include <linux/slab.h>
-static const struct ssb_sprom *fallback_sprom;
+static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
@@ -145,36 +145,43 @@ out:
}
/**
- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
+ * ssb_arch_register_fallback_sprom - Registers a method providing a
+ * fallback SPROM if no SPROM is found.
*
- * @sprom: The SPROM data structure to register.
+ * @sprom_callback: The callback function.
*
- * With this function the architecture implementation may register a fallback
- * SPROM data structure. The fallback is only used for PCI based SSB devices,
- * where no valid SPROM can be found in the shadow registers.
+ * With this function the architecture implementation may register a
+ * callback handler which fills the SPROM data structure. The fallback is
+ * only used for PCI based SSB devices, where no valid SPROM can be found
+ * in the shadow registers.
*
- * This function is useful for weird architectures that have a half-assed SSB device
- * hardwired to their PCI bus.
+ * This function is useful for weird architectures that have a half-assed
+ * SSB device hardwired to their PCI bus.
*
- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
- * don't use this fallback.
- * Architectures must provide the SPROM for native SSB devices anyway,
- * so the fallback also isn't used for native devices.
+ * Note that it does only work with PCI attached SSB devices. PCMCIA
+ * devices currently don't use this fallback.
+ * Architectures must provide the SPROM for native SSB devices anyway, so
+ * the fallback also isn't used for native devices.
*
- * This function is available for architecture code, only. So it is not exported.
+ * This function is available for architecture code, only. So it is not
+ * exported.
*/
-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
+int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
+ struct ssb_sprom *out))
{
- if (fallback_sprom)
+ if (get_fallback_sprom)
return -EEXIST;
- fallback_sprom = sprom;
+ get_fallback_sprom = sprom_callback;
return 0;
}
-const struct ssb_sprom *ssb_get_fallback_sprom(void)
+int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
{
- return fallback_sprom;
+ if (!get_fallback_sprom)
+ return -ENOENT;
+
+ return get_fallback_sprom(bus, out);
}
/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -171,7 +171,8 @@ ssize_t ssb_attr_sprom_store(struct ssb_
const char *buf, size_t count,
int (*sprom_check_crc)(const u16 *sprom, size_t size),
int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
-extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
+extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
+ struct ssb_sprom *out);
/* core.c */
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -308,7 +308,7 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
- u16 chip_rev;
+ u8 chip_rev;
u16 sprom_offset;
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
@@ -404,7 +404,9 @@ extern bool ssb_is_sprom_available(struc
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+extern int ssb_arch_register_fallback_sprom(
+ int (*sprom_callback)(struct ssb_bus *bus,
+ struct ssb_sprom *out));
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
@@ -518,6 +520,7 @@ extern int ssb_bus_may_powerdown(struct
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
+extern void ssb_commit_settings(struct ssb_bus *bus);
/* Various helper functions */
extern u32 ssb_admatch_base(u32 adm);
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -123,6 +123,8 @@
#define SSB_CHIPCO_FLASHDATA 0x0048
#define SSB_CHIPCO_BCAST_ADDR 0x0050
#define SSB_CHIPCO_BCAST_DATA 0x0054
+#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */
+#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
#define SSB_CHIPCO_GPIOIN 0x0060
#define SSB_CHIPCO_GPIOOUT 0x0064
#define SSB_CHIPCO_GPIOOUTEN 0x0068
@@ -131,6 +133,9 @@
#define SSB_CHIPCO_GPIOIRQ 0x0074
#define SSB_CHIPCO_WATCHDOG 0x0080
#define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
+#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF
+#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0
+#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000
#define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16
#define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
#define SSB_CHIPCO_CLOCK_N 0x0090
@@ -189,8 +194,10 @@
#define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
#define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
#define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
-#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */
-#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */
+#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
+#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */
+#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
+#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
#define SSB_CHIPCO_UART0_DATA 0x0300
#define SSB_CHIPCO_UART0_IMR 0x0304
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -97,7 +97,7 @@
#define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
#define SSB_TMSLOW 0x0F98 /* SB Target State Low */
#define SSB_TMSLOW_RESET 0x00000001 /* Reset */
-#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */
+#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */
#define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
#define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
#define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
Reference in New Issue View Git Blame Copy Permalink