347 lines
8.7 KiB
C
347 lines
8.7 KiB
C
/*
|
|
* MikroTik RouterBOARD 750/750GL support
|
|
*
|
|
* Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/export.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/ar8216_platform.h>
|
|
#include <linux/rle.h>
|
|
#include <linux/routerboot.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/irq.h>
|
|
#include <asm/mach-ath79/mach-rb750.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-eth.h"
|
|
#include "machtypes.h"
|
|
#include "routerboot.h"
|
|
|
|
static struct rb750_led_data rb750_leds[] = {
|
|
{
|
|
.name = "rb750:green:act",
|
|
.mask = RB750_LED_ACT,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "rb750:green:port1",
|
|
.mask = RB750_LED_PORT5,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "rb750:green:port2",
|
|
.mask = RB750_LED_PORT4,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "rb750:green:port3",
|
|
.mask = RB750_LED_PORT3,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "rb750:green:port4",
|
|
.mask = RB750_LED_PORT2,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "rb750:green:port5",
|
|
.mask = RB750_LED_PORT1,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct rb750_led_data rb750gr3_leds[] = {
|
|
{
|
|
.name = "rb750:green:act",
|
|
.mask = RB7XX_LED_ACT,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct rb750_led_platform_data rb750_leds_data;
|
|
static struct platform_device rb750_leds_device = {
|
|
.name = "leds-rb750",
|
|
.dev = {
|
|
.platform_data = &rb750_leds_data,
|
|
}
|
|
};
|
|
|
|
static struct rb7xx_nand_platform_data rb750_nand_data;
|
|
static struct platform_device rb750_nand_device = {
|
|
.name = "rb750-nand",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &rb750_nand_data,
|
|
}
|
|
};
|
|
|
|
static void rb750_latch_change(u32 mask_clr, u32 mask_set)
|
|
{
|
|
static DEFINE_SPINLOCK(lock);
|
|
static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE;
|
|
static u32 latch_oe;
|
|
static u32 latch_clr;
|
|
unsigned long flags;
|
|
u32 t;
|
|
|
|
spin_lock_irqsave(&lock, flags);
|
|
|
|
if ((mask_clr & BIT(31)) != 0 &&
|
|
(latch_set & RB750_LVC573_LE) == 0) {
|
|
goto unlock;
|
|
}
|
|
|
|
latch_set = (latch_set | mask_set) & ~mask_clr;
|
|
latch_clr = (latch_clr | mask_clr) & ~mask_set;
|
|
|
|
if (latch_oe == 0)
|
|
latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE);
|
|
|
|
if (likely(latch_set & RB750_LVC573_LE)) {
|
|
void __iomem *base = ath79_gpio_base;
|
|
|
|
t = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
|
t |= mask_clr | latch_oe | mask_set;
|
|
|
|
__raw_writel(t, base + AR71XX_GPIO_REG_OE);
|
|
__raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR);
|
|
__raw_writel(latch_set, base + AR71XX_GPIO_REG_SET);
|
|
} else if (mask_clr & RB750_LVC573_LE) {
|
|
void __iomem *base = ath79_gpio_base;
|
|
|
|
latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
|
__raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR);
|
|
/* flush write */
|
|
__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
|
|
}
|
|
|
|
unlock:
|
|
spin_unlock_irqrestore(&lock, flags);
|
|
}
|
|
|
|
static void rb750_nand_enable_pins(void)
|
|
{
|
|
rb750_latch_change(RB750_LVC573_LE, 0);
|
|
ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
|
|
AR724X_GPIO_FUNC_SPI_EN);
|
|
}
|
|
|
|
static void rb750_nand_disable_pins(void)
|
|
{
|
|
ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
|
|
AR724X_GPIO_FUNC_JTAG_DISABLE);
|
|
rb750_latch_change(0, RB750_LVC573_LE);
|
|
}
|
|
|
|
static void __init rb750_setup(void)
|
|
{
|
|
ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
|
|
AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
|
|
AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
|
|
AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
|
|
AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
/* LAN ports */
|
|
ath79_register_eth(1);
|
|
|
|
/* WAN port */
|
|
ath79_register_eth(0);
|
|
|
|
rb750_leds_data.num_leds = ARRAY_SIZE(rb750_leds);
|
|
rb750_leds_data.leds = rb750_leds;
|
|
rb750_leds_data.latch_change = rb750_latch_change;
|
|
platform_device_register(&rb750_leds_device);
|
|
|
|
rb750_nand_data.nce_line = RB750_NAND_NCE;
|
|
rb750_nand_data.enable_pins = rb750_nand_enable_pins;
|
|
rb750_nand_data.disable_pins = rb750_nand_disable_pins;
|
|
rb750_nand_data.latch_change = rb750_latch_change;
|
|
platform_device_register(&rb750_nand_device);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",
|
|
rb750_setup);
|
|
|
|
static struct ar8327_pad_cfg rb750gr3_ar8327_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_RGMII,
|
|
.txclk_delay_en = true,
|
|
.rxclk_delay_en = true,
|
|
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
|
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
};
|
|
|
|
static struct ar8327_platform_data rb750gr3_ar8327_data = {
|
|
.pad0_cfg = &rb750gr3_ar8327_pad0_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
}
|
|
};
|
|
|
|
static struct mdio_board_info rb750g3_mdio_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &rb750gr3_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static void rb750gr3_nand_enable_pins(void)
|
|
{
|
|
ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
|
|
AR724X_GPIO_FUNC_SPI_EN |
|
|
AR724X_GPIO_FUNC_SPI_CS_EN2);
|
|
}
|
|
|
|
static void rb750gr3_nand_disable_pins(void)
|
|
{
|
|
ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN |
|
|
AR724X_GPIO_FUNC_SPI_CS_EN2,
|
|
AR724X_GPIO_FUNC_JTAG_DISABLE);
|
|
}
|
|
|
|
static void rb750gr3_latch_change(u32 mask_clr, u32 mask_set)
|
|
{
|
|
static DEFINE_SPINLOCK(lock);
|
|
static u32 latch_set = RB7XX_LED_ACT;
|
|
static u32 latch_clr;
|
|
void __iomem *base = ath79_gpio_base;
|
|
unsigned long flags;
|
|
u32 t;
|
|
|
|
spin_lock_irqsave(&lock, flags);
|
|
|
|
latch_set = (latch_set | mask_set) & ~mask_clr;
|
|
latch_clr = (latch_clr | mask_clr) & ~mask_set;
|
|
|
|
mask_set = latch_set & (RB7XX_USB_POWERON | RB7XX_MONITOR);
|
|
mask_clr = latch_clr & (RB7XX_USB_POWERON | RB7XX_MONITOR);
|
|
|
|
if ((latch_set ^ RB7XX_LED_ACT) & RB7XX_LED_ACT) {
|
|
/* enable output mode */
|
|
t = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
|
t |= RB7XX_LED_ACT;
|
|
__raw_writel(t, base + AR71XX_GPIO_REG_OE);
|
|
|
|
mask_clr |= RB7XX_LED_ACT;
|
|
} else {
|
|
/* disable output mode */
|
|
t = __raw_readl(base + AR71XX_GPIO_REG_OE);
|
|
t &= ~RB7XX_LED_ACT;
|
|
__raw_writel(t, base + AR71XX_GPIO_REG_OE);
|
|
}
|
|
|
|
__raw_writel(mask_set, base + AR71XX_GPIO_REG_SET);
|
|
__raw_writel(mask_clr, base + AR71XX_GPIO_REG_CLEAR);
|
|
|
|
spin_unlock_irqrestore(&lock, flags);
|
|
}
|
|
|
|
static void __init rb750gr3_setup(void)
|
|
{
|
|
ath79_register_mdio(0, 0x0);
|
|
mdiobus_register_board_info(rb750g3_mdio_info,
|
|
ARRAY_SIZE(rb750g3_mdio_info));
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_pll_data.pll_1000 = 0x62000000;
|
|
|
|
ath79_register_eth(0);
|
|
|
|
rb750_leds_data.num_leds = ARRAY_SIZE(rb750gr3_leds);
|
|
rb750_leds_data.leds = rb750gr3_leds;
|
|
rb750_leds_data.latch_change = rb750gr3_latch_change;
|
|
platform_device_register(&rb750_leds_device);
|
|
|
|
rb750_nand_data.nce_line = RB7XX_NAND_NCE;
|
|
rb750_nand_data.enable_pins = rb750gr3_nand_enable_pins;
|
|
rb750_nand_data.disable_pins = rb750gr3_nand_disable_pins;
|
|
rb750_nand_data.latch_change = rb750gr3_latch_change;
|
|
platform_device_register(&rb750_nand_device);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_RB_750G_R3, "750Gr3", "MikroTik RouterBOARD 750GL",
|
|
rb750gr3_setup);
|
|
|
|
#define RB751_HARDCONFIG 0x1f00b000
|
|
#define RB751_HARDCONFIG_SIZE 0x1000
|
|
|
|
static void __init rb751_wlan_setup(void)
|
|
{
|
|
u8 *hardconfig = (u8 *) KSEG1ADDR(RB751_HARDCONFIG);
|
|
struct ath9k_platform_data *wmac_data;
|
|
u16 tag_len;
|
|
u8 *tag;
|
|
u16 mac_len;
|
|
u8 *mac;
|
|
int err;
|
|
|
|
wmac_data = ap9x_pci_get_wmac_data(0);
|
|
if (!wmac_data) {
|
|
pr_err("rb75x: unable to get address of wlan data\n");
|
|
return;
|
|
}
|
|
|
|
ap9x_pci_setup_wmac_led_pin(0, 9);
|
|
|
|
err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
|
|
RB_ID_WLAN_DATA, &tag, &tag_len);
|
|
if (err) {
|
|
pr_err("rb75x: no calibration data found\n");
|
|
return;
|
|
}
|
|
|
|
err = rle_decode(tag, tag_len, (unsigned char *) wmac_data->eeprom_data,
|
|
sizeof(wmac_data->eeprom_data), NULL, NULL);
|
|
if (err) {
|
|
pr_err("rb75x: unable to decode wlan eeprom data\n");
|
|
return;
|
|
}
|
|
|
|
err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
|
|
RB_ID_MAC_ADDRESS_PACK, &mac, &mac_len);
|
|
if (err) {
|
|
pr_err("rb75x: no mac address found\n");
|
|
return;
|
|
}
|
|
|
|
ap91_pci_init(NULL, mac);
|
|
}
|
|
|
|
static void __init rb751_setup(void)
|
|
{
|
|
rb750_setup();
|
|
ath79_register_usb();
|
|
rb751_wlan_setup();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_RB_751, "751", "MikroTik RouterBOARD 751",
|
|
rb751_setup);
|
|
|
|
static void __init rb751g_setup(void)
|
|
{
|
|
rb750gr3_setup();
|
|
ath79_register_usb();
|
|
rb751_wlan_setup();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_RB_751G, "751g", "MikroTik RouterBOARD 751G",
|
|
rb751g_setup);
|