OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Felix Fietkau 4e577f8c71 openwrt: honour gcc extra configuration flags
Although the CONFIG_EXTRA_GCC_OPTIONS flag is available, it isn't used
anywhere.

This change adds the extra flag to both gcc configure stages.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-23 06:23:17 +00:00
docs apply latex style patch posted on openwrt-devel@lists 2007-09-29 11:35:51 +00:00
include don't replace powerpc arch with ppc 2007-10-23 06:23:12 +00:00
package remove madwifi karma patch until it's fixed 2007-10-22 22:40:23 +00:00
scripts remove the dummy profile that was created on targets that have subtargets 2007-10-21 06:44:06 +00:00
target don't replace powerpc arch with ppc 2007-10-23 06:23:12 +00:00
toolchain openwrt: honour gcc extra configuration flags 2007-10-23 06:23:17 +00:00
tools ar7: add eva image generation (thanks Axel Gembe) 2007-10-22 14:20:02 +00:00
.gitignore add package/feeds to .gitignore 2007-10-13 02:05:06 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add possibility to set default .config values 2007-10-14 02:15:37 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add autorebuild check for menuconfig 2007-10-14 02:28:34 +00:00
README add information about the tex4ht requirement for the docs 2007-02-26 01:06:41 +00:00
feeds.conf add initial version of a package feeds management script 2007-09-23 02:39:01 +00:00
rules.mk refreshed madwifi patches 2007-10-20 19:13:53 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org