wifipineapple-openwrt/target/linux/mvebu/patches-3.10/0067-ARM-mvebu-set-aliases-...

91 lines
2.2 KiB
Diff

From cc4fb487fbf95c97b40e1e8e5b8b2ddabc8d124d Mon Sep 17 00:00:00 2001
From: Willy Tarreau <w@1wt.eu>
Date: Mon, 3 Jun 2013 18:47:36 +0200
Subject: [PATCH 067/203] ARM: mvebu: set aliases for ethernet controllers
These aliases are used when feeding the DT from ATAGS to set the
devices MAC addresses.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/boot/dts/armada-370-xp.dtsi | 9 +++++++--
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 3 ++-
arch/arm/boot/dts/armada-xp.dtsi | 6 +++++-
3 files changed, 14 insertions(+), 4 deletions(-)
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -24,6 +24,11 @@
model = "Marvell Armada 370 and XP SoC";
compatible = "marvell,armada-370-xp";
+ aliases {
+ eth0 = &eth0;
+ eth1 = &eth1;
+ };
+
cpus {
cpu@0 {
compatible = "marvell,sheeva-v7";
@@ -151,7 +156,7 @@
reg = <0x72004 0x4>;
};
- ethernet@70000 {
+ eth0: ethernet@70000 {
compatible = "marvell,armada-370-neta";
reg = <0x70000 0x4000>;
interrupts = <8>;
@@ -159,7 +164,7 @@
status = "disabled";
};
- ethernet@74000 {
+ eth1: ethernet@74000 {
compatible = "marvell,armada-370-neta";
reg = <0x74000 0x4000>;
interrupts = <10>;
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -23,6 +23,7 @@
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
+ eth3 = &eth3;
};
@@ -326,7 +327,7 @@
interrupts = <91>;
};
- ethernet@34000 {
+ eth3: ethernet@34000 {
compatible = "marvell,armada-370-neta";
reg = <0x34000 0x4000>;
interrupts = <14>;
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -22,6 +22,10 @@
model = "Marvell Armada XP family SoC";
compatible = "marvell,armadaxp", "marvell,armada-370-xp";
+ aliases {
+ eth2 = &eth2;
+ };
+
soc {
compatible = "marvell,armadaxp-mbus", "simple-bus";
@@ -93,7 +97,7 @@
reg = <0x18200 0x500>;
};
- ethernet@30000 {
+ eth2: ethernet@30000 {
compatible = "marvell,armada-370-neta";
reg = <0x30000 0x4000>;
interrupts = <12>;