OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Felix Fietkau 4c407b15c6 atheros: ignore rx long packet error flag from the ethernet core
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15225 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-13 00:43:38 +00:00
docs [docs] document a little bit more the rationale of the 6bridge script 2009-04-02 09:43:53 +00:00
include fix source file vs library order in a few prereq checks (#4326) 2009-04-09 21:13:15 +00:00
package do not run hotplug event for aliases 2009-04-13 00:43:23 +00:00
scripts use parent-dependencies for all dependencies of a package, not only those which are conditional deendencies (thanks to lars (also for this commit message :P)) 2009-04-10 11:41:18 +00:00
target atheros: ignore rx long packet error flag from the ethernet core 2009-04-13 00:43:38 +00:00
toolchain mark uclibc nptl and snapshot as broken 2009-04-09 20:01:28 +00:00
tools [tools] fix ccache host installation (#4902) 2009-04-09 13:16:57 +00:00
.gitignore add feeds.conf to .gitignore 2008-09-23 11:06:06 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in Add FEATURE ramdisk to be able to select the use of INITRAMFS for a sub-target 2009-03-18 15:57:18 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile avoid implicit rules in even more places 2009-03-03 14:16:48 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
feeds.conf.default feeds.conf.default: Change openwrt feeds urls from https to svn 2009-04-01 18:29:19 +00:00
rules.mk move cflags default setting to target makefiles 2009-03-14 03:17:06 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org