OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support
 
 
 
 
 
 
Go to file
Jonas Gorski 4c00516bd2 kernel: add some more missing kernel config symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 09:25:32 +00:00
docs [docs]: kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include [include] ensure that profile Makefiles are sourced in alphabetical order 2012-04-23 16:10:25 +00:00
package kernel: add some more missing kernel config symbols 2012-04-24 09:25:32 +00:00
scripts [scripts] allow arbitary folder layout when using localmirrors 2012-04-10 14:11:45 +00:00
target kernel: add some more missing kernel config symbols 2012-04-24 09:25:32 +00:00
toolchain [toolchain/gcc] remove screwed up patch for gcc 4.7-linaro which got committed by accident 2012-04-21 10:23:49 +00:00
tools tools: add xz dependency to automake 2012-04-21 16:09:04 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile
Config.in make xz ramdisk images also available for 2.6.39+ 2012-04-18 15:14:05 +00:00
LICENSE
Makefile [buildroot] abort built in prereq target if there is no site config file for the current target 2012-01-19 12:19:28 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
rules.mk [include] Use build suffix on build_dir paths 2012-04-10 10:55:55 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org