wifipineapple-openwrt

OpenWrt Chaos Calmer with WiFi Pineapple NANO and TETRA board support

Go to file

Hauke Mehrtens 4a38dd6fd3 [kernel] add missing symbols git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14721 3c298f89-4303-0410-b956-a3cf2f4a3e73		2009-03-01 20:15:33 +00:00
docs	[package] allow mac80211 devices to be configured to do 802.11s, requires iw	2009-02-26 14:53:03 +00:00
include	added source distribution to package dump, used by our SDK (include source distributions for offline usage)	2009-03-01 09:35:53 +00:00
package	[kernel] add missing symbols	2009-03-01 20:15:33 +00:00
scripts	added source distribution to package dump, used by our SDK (include source distributions for offline usage)	2009-03-01 09:35:53 +00:00
target	[kernel] add missing symbols	2009-03-01 20:15:33 +00:00
toolchain	fix powerpc build (works for 2.4 and 2.6)	2009-03-01 11:04:08 +00:00
tools	add dependency (needed for parallel build)	2009-03-01 09:47:05 +00:00
.gitignore	add feeds.conf to .gitignore	2008-09-23 11:06:06 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add the possibility to put the rootfs to another location	2009-02-20 10:38:08 +00:00
LICENSE	rename GPL to LICENSE	2005-08-13 12:29:03 +00:00
Makefile	remove toolchain build directory as well in 'make dirclean'	2008-12-03 04:22:41 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	Add desktop and xfce feed to feeds.conf.default	2009-01-19 19:46:03 +00:00
rules.mk	second part of target rootfs relocation	2009-02-20 10:44:19 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org